[OpenSIPS-Users] freeradiusd-2.2.0 Unsupported Acct-Status-Type = 15

[Laszlo]

Did you compile freeradius from source? If so, you will need to patch it
and then recompile freeradius.
The patch can be found here:
http://download.dns-hosting.info/CDRTool/contrib/freeradius-brandinger/


These are quite old patches, if the most recent patch isn't working for
you, then you will need to go through the patching logic manually. It will
involve editing the following files:

- freeradius/src/include/radius.h
- freeradius/src/modules/rlm_sql/conf.h
- freeradius/src/modules/rlm_sql/rlm_sql.c
- the config file under freeradius's /etc directory

Look at the lines with the "+" lines in the patch file.


-Laszlo



2013/7/3 ㄨ冷se灬 <291490117 at qq.com>

> dear all:
>          I update my freeradius from v1.1.8 to v2.2.0.
>          when I use v2.2.0 ,I can’t see unsuccessfully calls(like
> cancel,etc)
>
>          and radius got this log:
> rad_recv: Accounting-Request packet from host 10.1.17.71 port 47962,
> id=165, length=510
>     Acct-Status-Type = Failed
>     Service-Type = IAPP-Register
>     Sip-Response-Code = 487
>     Sip-Method = Invite
>     Event-Timestamp = "Jul  3 2013 08:55:14 CST"
>     Sip-From-Tag = "202199366"
>     Sip-To-Tag = "3c11a175"
>     Acct-Session-Id = "261192415021484-264973041726312 at 10.49.2.236"
>     User-Name = "66687113 at 10.1.17.71"
>     Billing-Party = "66687113 at 10.1.17.71"
>     Calling-Station-Id = "66687113 at 10.1.17.71"
>     Called-Station-Id = "sip:66687114 at c.corp.esocc.com:5060"
>     Sip-Translated-Request-URI = "sip:66687114 at 221.228.228.14:58709
> ;rinstance=e3a8a78bae83cfb9"
>     Source-IP = "221.228.228.14"
>     Source-Port = "32670"
>     SIP-Proxy-IP = "10.1.17.71"
>     Canonical-URI = "sip:008666687114 at 221.228.228.14:58709
> ;rinstance=e3a8a78bae83cfb9"
>     User-Agent = "Voip Phone 1.0"
>     Contact = "<sip:66687113 at 221.228.228.14:32670>"
>     From-Header = "66687113 <sip:66687113 at c.corp.esocc.com:5060
> >;tag=202199366"
>     NAS-Port = 5060
>     Acct-Delay-Time = 0
>     NAS-IP-Address = 10.1.17.71
> # Executing section preacct from file
> /usr/local/freeradius/etc/raddb/radiusd.conf
> +- entering group preacct {...}
> ++[preprocess] returns ok
> # Executing section accounting from file
> /usr/local/freeradius/etc/raddb/radiusd.conf
> +- entering group accounting {...}
> [detail]     expand:
> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
> -> /usr/local/freeradius/var/log/radius/radacct/10.1.17.71/detail-20130703
> [detail]
> /usr/local/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
> expands to /usr/local/freeradius/var/log/radius/radacct/
> 10.1.17.71/detail-20130703
> [detail]     expand: %t -> Wed Jul  3 08:55:14 2013
> ++[detail] returns ok
> [sql] Unsupported Acct-Status-Type = 15
> ++[sql] returns noop
> Sending Accounting-Response of id 165 to 10.1.17.71 port 47962
> Finished request 1.
> Cleaning up request 1 ID 165 with timestamp +9
> Going to the next request
> Waking up in 3.4 seconds.
> Cleaning up request 0 ID 164 with timestamp +7
> Ready to process requests.
>
>
>       It seem Unsupported Acct-Status-Type = 15,and I check my dictionary
>       VALUE Acct-Status-Type     Failed           15         # RFC2866, acc
>
>
>       I'm sure there's a configuration step I've missed. Could anyone
> suggest some
>       other things to check?
>
>
>
>
> Thanks
> vic.xiang
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>


-- 

--
Kind regards,
Laszlo Bekesi
http://voipfreak.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20130703/97ea0d6b/attachment.htm>