[OpenSIPS-Users] Siptrace Issue
Seth Schultz
sschultz at scholarchip.com
Wed Feb 6 19:52:33 CET 2013
Unfortunately I am having trouble getting the system to dump a core
file. Here is the error message I am getting once I enable core dumps.
/etc/init.d/opensips: 103: /etc/init.d/opensips: cannot create
/proc/sys/kernel/core_pattern: Permission denied
I have also tried starting opensips as the root user, but it still
throws this error.
Here is my /etc/defaults/opensips:
RUN_OPENSIPS=yes
USER=opensips
GROUP=opensips
S_MEMORY=1024
P_MEMORY=32
DUMP_CORE=yes
And here are the relevant lines in /etc/init.d/opensips:
if test "$DUMP_CORE" = "yes" ; then
# set proper ulimit
ulimit -c unlimited
# directory for the core dump files
COREDIR=/home/corefiles
[ -d $COREDIR ] || mkdir $COREDIR
chmod 777 $COREDIR
echo "$COREDIR/core.%e.sig%s.%p" > /proc/sys/kernel/core_pattern
fi
Thanks,
Seth
On 2/6/2013 12:27 PM, Bogdan-Andrei Iancu wrote:
> yes, you have to, if using the debian init.d files.
>
> The core will be dumped into the opensips working directory - if not
> configured one, it will be in root file system "/".
>
> Regards,
>
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developer
> http://www.opensips-solutions.com
>
>
> On 02/06/2013 07:02 PM, Seth Schultz wrote:
>> I assume I also need to set the following variable in
>> /etc/default/opensips.
>>
>> change
>> DUMP_CORE=no
>> to
>> DUMP_CORE=yes
>>
>> This may be a silly question, but where will it dump the core file to?
>>
>> Thanks,
>> Seth
>>
>>
>> On 2/6/2013 11:56 AM, Bogdan-Andrei Iancu wrote:
>>> Where you changed the LM_ERR() in code, after it, simply put :
>>> abort(); . Recompile and run again -> when you get the error,
>>> opensips should stop by itself with a core dump. Once you get the
>>> core file, use gdb to get a backtrace (run "bt" on gdb).
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>> OpenSIPS Founder and Developer
>>> http://www.opensips-solutions.com
>>>
>>>
>>> On 02/06/2013 06:23 PM, Seth Schultz wrote:
>>>> Bogdan-Andrei,
>>>>
>>>> Thank you for the reply. I have seen this error occur in both
>>>> 1.8.2 and 1.9.0. Would you please explain exactly how I can catch
>>>> the error and call abort()? Also, is there anything else I can
>>>> enable which would help us track down the cause?
>>>>
>>>> Thanks,
>>>> Seth
>>>>
>>>> Seth Schultz
>>>> E-Mail: sschultz at scholarchip.com
>>>> Phone: 212.255.8005 x 124
>>>> Fax: 212.255.8091
>>>>
>>>> On 2/6/2013 11:09 AM, Bogdan-Andrei Iancu wrote:
>>>>> Hi Seth,
>>>>>
>>>>> That is really strange - using 1.9 or 1.8 ?
>>>>>
>>>>> Do make it short, could you put an "abort()" when the error is
>>>>> triggered ? -> we could look into backtrace to see where the
>>>>> faulty string comes from.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Bogdan-Andrei Iancu
>>>>> OpenSIPS Founder and Developer
>>>>> http://www.opensips-solutions.com
>>>>>
>>>>>
>>>>> On 02/06/2013 01:09 AM, Seth Schultz wrote:
>>>>>> Hello,
>>>>>>
>>>>>> Could someone please help me resolve the following error message
>>>>>> "ERROR:siptrace:pipport2su: no port specified". This error only
>>>>>> happens on some of the sip packets, but I can't determine why.
>>>>>> When this error occurs, the trace for those packets never make it
>>>>>> to my homer capture server (I have to use ngrep to see them).
>>>>>>
>>>>>> Furthermore, I modified siptrace.c to output the value of pipport
>>>>>> and the error message returned this "ERROR:siptrace:pipport2su:
>>>>>> udp:172.16.1.115 no port specified". I am just not sure where it
>>>>>> is getting the udp:172.16.1.115 value from.
>>>>>>
>>>>>> Thanks in advance,
>>>>>> Seth
>>>>>>
>>>>>> Here are my module parameters.
>>>>>> ...
>>>>>> port=5060
>>>>>> listen=udp:172.16.1.115:5060
>>>>>> ...
>>>>>>
>>>>>> loadmodule "siptrace.so"
>>>>>> modparam("siptrace", "enable_ack_trace", 1)
>>>>>> modparam("siptrace", "trace_flag", "TRACE")
>>>>>> modparam("siptrace", "trace_on", 1)
>>>>>> modparam("siptrace", "trace_to_database", 0)
>>>>>> modparam("siptrace", "traced_user_avp", "$avp(called)")
>>>>>> modparam("siptrace", "hep_version", 2)
>>>>>> modparam("siptrace", "hep_capture_id", 338)
>>>>>> modparam("siptrace", "duplicate_uri", "sip:172.16.1.99:9060")
>>>>>> modparam("siptrace", "duplicate_with_hep", 1)
>>>>>>
>>>>>> and here is how I am using siptrace in my script.
>>>>>>
>>>>>> route{
>>>>>> ...
>>>>>> setflag(TRACE);
>>>>>> sip_trace();
>>>>>> ...
>>>>>>
>>>>>> }
>>>>>>
>>>>>> Below is a capture (from ngrep) of a packet that through this error.
>>>>>>
>>>>>> INVITE sip:12063430011 at yyy.yyy.yyy.yyy SIP/2.0.
>>>>>> Record-Route:
>>>>>> <sip:xxx.xxx.xxx.xxx;lr;ftag=0m15597FNecKe;schip=d4c.b840a454>.
>>>>>> Via: SIP/2.0/UDP xxx.xxx.xxx.xxx:5060;branch=z9hG4bK0533.69b5df66.1.
>>>>>> Via: SIP/2.0/UDP
>>>>>> 172.16.1.105;received=172.16.1.105;rport=5060;branch=z9hG4bK3Uj0ye5ve15SK.
>>>>>> Max-Forwards: 69.
>>>>>> From: "Unknown" <sip:9999999999 at 172.16.1.115>;tag=0m15597FNecKe.
>>>>>> To: <sip:19999999999 at 172.16.1.115>.
>>>>>> Call-ID: a7747eca-ea88-1230-e489-57cd493474a3.
>>>>>> CSeq: 39716116 INVITE.
>>>>>> Contact:
>>>>>> <sip:gw+opensips at 172.16.1.105:5060;transport=udp;gw=opensips>.
>>>>>> User-Agent: FS.
>>>>>> Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, UPDATE, INFO,
>>>>>> REGISTER, REFER, NOTIFY.
>>>>>> Supported: timer, precondition, path, replaces.
>>>>>> Allow-Events: talk, hold, refer.
>>>>>> Session-Expires: 120;refresher=uac.
>>>>>> Min-SE: 120.
>>>>>> Content-Type: application/sdp.
>>>>>> Content-Disposition: session.
>>>>>> Content-Length: 247.
>>>>>> P-Call-Type: Notification.
>>>>>> X-FS-Support: update_display,send_info.
>>>>>> Remote-Party-ID: "Unknown"
>>>>>> <sip:9999999999 at 172.16.1.115>;party=calling;screen=yes;privacy=off.
>>>>>> .
>>>>>> v=0.
>>>>>> o=FreeSWITCH 1360080758 1360080759 IN IP4 zzz.zzz.zzz.zzz.
>>>>>> s=FreeSWITCH.
>>>>>> c=IN IP4 zzz.zzz.zzz.zzz.
>>>>>> t=0 0.
>>>>>> m=audio 29516 RTP/AVP 0 8 3 101.
>>>>>> a=rtpmap:101 telephone-event/8000.
>>>>>> a=fmtp:101 0-16.
>>>>>> a=silenceSupp:off - - - -.
>>>>>> a=ptime:20.
>>>>>> a=schipmangled:yes.
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>
>>
More information about the Users
mailing list