[OpenSIPS-Users] RTPProxy Problem
Ignacio Gonzalez
mylaneza at gmail.com
Mon Nov 12 22:36:49 CET 2012
Hello everybody, i red the post and didn't work.
Here is my command line to run rtpproxy and my configuration file of
OPENSIPS, if some one could help me.
./rtpproxy -l PUBLICIP/192.168.1.220 -s udp:192.168.1.220:12333 -n tcp:
192.168.1.220:12333 -u user -m 35000 -M 35200
#
# $Id: opensips_residential.m4 9042 2012-05-17 13:57:10Z vladut-paiu $
#
# OpenSIPS residential configuration script
# by OpenSIPS Solutions <team at opensips-solutions.com>
#
# This script was generated via "make menuconfig", from
# the "Residential" scenario.
# You can enable / disable more features / functionalities by
# re-generating the scenario with different options.#
#
# Please refer to the Core CookBook at:
# http://www.opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#
####### Global Parameters #########
debug=3
log_stderror=no
log_facility=LOG_LOCAL1
fork=yes
children=4
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* comment the next line to enable the auto discovery of local aliases
based on revers DNS on IPs */
auto_aliases=no
/* It can be an IP address or string and represents the address advertised
in Via header and other destination lumps (e.g RR header). If empty or
not
set (default value) the socket address from where the request will be
sent is used. */
advertised_address="public_ip"
listen=udp:192.168.1.220:5062
disable_tcp=no
listen=tcp:192.168.1.220:5062
disable_tls=yes
#port=5062
####### Modules Section ########
#set module path
mpath="/home/syrium/opensips_proxy/lib/opensips/modules/"
#### SIGNALING module
loadmodule "signaling.so"
#### StateLess module
loadmodule "sl.so"
#### Transaction Module
loadmodule "tm.so"
modparam("tm", "fr_timer", 5)
modparam("tm", "fr_inv_timer", 30)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "onreply_avp_mode", 1)
#### Record Route Module
loadmodule "rr.so"
/* do not append from tag to the RR (no need for this script) */
modparam("rr", "append_fromtag", 0)
#### MAX ForWarD module
loadmodule "maxfwd.so"
#### SIP MSG OPerationS module
loadmodule "sipmsgops.so"
#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)
#### URI module
loadmodule "uri.so"
modparam("uri", "use_uri_table", 0)
modparam("uri", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### MYSQL module
loadmodule "db_mysql.so"
#### USeR LOCation module
loadmodule "usrloc.so"
modparam("usrloc", "nat_bflag", 10)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### REGISTRAR module
loadmodule "registrar.so"
modparam("registrar", "tcp_persistent_flag", 7)
modparam("registrar", "received_avp", "$avp(received_nh)")
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
#### ACCounting module
loadmodule "acc.so"
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default we do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
modparam("acc", "failed_transaction_flag", 3)
/* account triggers (flags) */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### AUTHentication modules
loadmodule "auth.so"
loadmodule "auth_db.so"
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
modparam("auth_db", "load_credentials", "")
#### DOMAIN module
loadmodule "domain.so"
modparam("domain", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
modparam("domain", "db_mode", 1) # Use caching
modparam("auth_db|usrloc|uri", "use_domain", 1)
#### DIALOG module
loadmodule "dialog.so"
modparam("dialog", "dlg_match_mode", 1)
modparam("dialog", "default_timeout", 21600) # 6 hours timeout
modparam("dialog", "db_mode", 2)
modparam("dialog", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### NAT modules
loadmodule "nathelper.so"
modparam("nathelper", "natping_interval", 10)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "received_avp", "$avp(received_nh)")
loadmodule "nat_traversal.so"
loadmodule "rtpproxy.so"
modparam("rtpproxy", "rtpproxy_sock", "1 == udp:192.168.1.220:12333")
modparam("rtpproxy", "rtpp_notify_socket","tcp:192.168.1.220:12333")
modparam("rtpproxy", "rtpproxy_autobridge", 1)
####### Routing Logic ########
# main request routing logic
route{
force_rport();
if (nat_uac_test("23")) {
if (is_method("REGISTER")) {
fix_nated_register();
setbflag(10);
} else {
fix_nated_contact();
setflag(10);
}
}
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
# validate the sequential request against dialog
if ( $DLG_status!=NULL && !validate_dialog() ) {
xlog("In-Dialog $rm from $si (callid=$ci) is not valid
according to dialog\n");
## exit;
}
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change route set
# during the dialog.
record_route();
}
if (check_route_param("nat=yes"))
setflag(10);
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(1);
} else {
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK
after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
if ( !(is_method("REGISTER") ) ) {
if (is_from_local())
{
# authenticate if from local subscriber
# authenticate all initial non-REGISTER request that pretend to
be
# generated by local subscriber (domain from FROM URI is local)
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
consume_credentials();
# caller authenticated
} else {
# if caller is not local, then called number must be local
if (!is_uri_host_local()) {
send_reply("403","Rely forbidden");
exit;
}
}
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
# create dialog with timeout
if ( !create_dialog("B") ) {
send_reply("500","Internal Server Error");
exit;
}
setflag(1); # do accounting
}
if (!is_uri_host_local()) {
append_hf("P-hint: outbound\r\n");
route(1);
}
# requests for my domain
if (is_method("PUBLISH|SUBSCRIBE"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if (!db_check_to())
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
if ( proto==TCP || 0 ) setflag(7);
if (client_nat_test("3")) {
nat_keepalive();
}
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# do lookup with method filtering
if (!lookup("location","m")) {
if (!db_does_uri_exist()) {
send_reply("420","Bad Extension");
exit;
}
t_newtran();
t_reply("404", "Not Found");
exit;
}
if (isbflagset(10)) setflag(10);
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
if (isflagset(10)) {
set_rtp_proxy_set("1");
rtpproxy_offer("ro");
}
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
if (client_nat_test("3")) {
nat_keepalive();
}
}
if (isflagset(10)) {
add_rr_param(";nat=yes");
}
if (!t_relay()) {
send_reply("500","Internal Error");
};
exit;
}
branch_route[2] {
xlog("new branch at $ru\n");
}
#onreply_route[1]{
# xlog("reply route 1: sequential requests ($rs $rr)\n");
# if ( src_ip != onebox_asterisk1_ip && src_ip !=
onebox_asterisk2_ip ){
# if ( nat_uac_test( "31") ) {
# fix_nated_contact();
# force_rport();
# if( has_body( "application/sdp" ) ) {
# fix_nated_sdp( "3" );
# }
# }
# }
#}
onreply_route[2] {
if (nat_uac_test("1"))
fix_nated_contact();
if ( isflagset(10) ){
set_rtp_proxy_set("1");
rtpproxy_answer("ro");
}
xlog("incoming reply\n");
}
failure_route[1] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
}
local_route {
if (is_method("BYE") && $DLG_dir=="UPSTREAM") {
acc_db_request("200 Dialog Timeout", "acc");
}
}
2012/11/12 qasimakhan at gmail.com <qasimakhan at gmail.com>
> Or you can follow this tutorial and mend it to your needs,
>
> http://saevolgo.blogspot.com/2012/03/making-rtpproxy-work.html
>
> Regards,
> Qasim
>
>
>
> On Mon, Nov 12, 2012 at 1:40 PM, spady <spady77 at gmail.com> wrote:
>
>> Hi, take a look at my post. Probably you will find a solution for your
>> issue.
>>
>>
>> http://opensips-open-sip-server.1449251.n2.nabble.com/Rtpproxy-connection-td7581935.html
>>
>>
>>
>> --
>> View this message in context:
>> http://opensips-open-sip-server.1449251.n2.nabble.com/RTPProxy-Problem-tp7582930p7582943.html
>> Sent from the OpenSIPS - Users mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20121112/b6114e06/attachment-0001.htm>
More information about the Users
mailing list