[OpenSIPS-Users] Help: presence not working.

Sun Nov 11 12:48:56 CET 2012

Hi,

It could be the problem of the DHCP client on your devices (Lease to Expire, Keeps Using IP Address)

IOS 4.1 -6.0.1 and Android 2.1 - 4.0.4 have this bug.
http://www.net.princeton.edu/android/android-stops-renewing-lease-keeps-using-IP-address-11236.html

http://www.net.princeton.edu/apple-ios/ios41-allows-lease-to-expire-keeps-using-IP-address.html

Try to reserve the address in DHCP server to see if this is problem or not.

// Binan.

________________________________
 Från: Friend_14309 <intel.14309 at gmail.com>
Till: Bogdan-Andrei Iancu <bogdan at opensips.org> 
Kopia: OpenSIPS users mailling list <users at lists.opensips.org> 
Skickat: lördag, 10 november 2012 23:10
Ämne: Re: [OpenSIPS-Users] Help: presence not working.

Hi.
Yes, I was also surprised to see that. But, Still my presence problem is there :(
But, when I connect Ekiga client from PC which is directly connected to SIP server, I can see the presence. But my DHCP clients are not able to see the presence of each other.

Any suggestions where I should look to solve this problem.

On Fri, Nov 9, 2012 at 7:21 PM, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote:

>Hi,
>
>I do not see any ERROR messages in the log you send me :(.
>
>Regards,
>
>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
>
>On 11/08/2012 07:28 PM, Friend_14309 wrote: 
>Hi
>>Sorry for the late reply. Here is the attached log file with 
      'debug=6'. Please let me know, what I am doing wrong. 
>>
>>
>>On Tue, Nov 6, 2012 at 8:09 PM, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote:
>>
>>In your opensips.cfg file, set be sure that the "debug" value is 6- after changing, do a restart. You will opensips is very verbose now.
>>>
>>>Make the scenario that generates the error and send me the
              entire log file (starting with opensips start).
>>>
>>>Regards,
>>> 
>>>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com
>>>
>>>On 11/06/2012 12:47 PM, Friend_14309 wrote: 
>>>I will be happy do it, but, I am very much new to this and linux.
>>>>Can you please point in the direction how to do it?
>>>>
>>>>Thank you.
>>>>
>>>>
>>>>On Tue, Nov 6, 2012 at 11:40 AM, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote:
>>>>
>>>>Hi,
>>>>>
>>>>>You do not need pua (Presece User Agent) to
                          simply do presence between end-points.
>>>>>
>>>>>Could you run opensips in full debug mode (set
                          debug=6) and send me (off list) the entire log
                          generated by opensips ?
>>>>>
>>>>>Regards,
>>>>> 
>>>>>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com
>>>>>
>>>>>On 11/06/2012 10:32 AM, Friend_14309 wrote: 
>>>>>Hello,
>>>>>>
>>>>>>No, there no NAT in my test network, just
                              simple static routing. 
>>>>>>also, No. There is no other Error message
                              before that "udp_send" ERROR message.
>>>>>>
>>>>>>One thing that I would like to ask is, I
                              did not install "pua" modules. Are they
                              necessary if I am implementing simple
                              presence server i.e. everyone is allowed
                              to see the presence of each other. 
>>>>>>
>>>>>>Thank you.
>>>>>>
>>>>>>
>>>>>>On Mon, Nov 5, 2012 at 8:36 PM, Bogdan-Andrei Iancu <bogdan at opensips.org> wrote:
>>>>>>
>>>>>>Hi,
>>>>>>>
>>>>>>>Do you have any kind of NAT in
                                      your used network (like one of the
                                      clients behind a NAT) ?
>>>>>>>
>>>>>>>Also, before the "udp_send" ERROR,
                                      do you see any other error from
                                      the same process ?
>>>>>>>
>>>>>>>Regards,
>>>>>>> 
>>>>>>>Bogdan-Andrei Iancu
OpenSIPS Founder and Developer http://www.opensips-solutions.com
>>>>>>>
>>>>>>>On 11/05/2012 01:06 PM,
                                        Friend_14309 wrote: 
>>>>>>>Hi. I am new to this world, so please help.
>>>>>>>>I am trying to set up a lab. I
                                          have 2 DHCP servers and a SIP
                                          server.
>>>>>>>>
>>>>>>>>My DHCP server ans OpenSIPS
                                          are working fine. But, when I
                                          register my clients to SIP
                                          server, I can not see there
                                          presence, though I can make
                                          call between clients. 
>>>>>>>>
>>>>>>>>I get these messages, 
>>>>>>>>
>>>>>>>>
>>>>>>>>"INFO:presence:handle_expired_subs:

                                          notify"
>>>>>>>>
>>>>>>>>"INFO:presence:send_notify_request:
                                          NOTIFY sip:mika at 172.17.100.5 via sip:mika at 172.16.102.11 on behalf of sip:mika at 172.17.100.5 for event presence.winfo, to_tag=b11fa29be7deff2756188f5829692e66-e5da, cseq=3"
>>>>>>>>
>>>>>>>>"ERROR:tm:msg_send: udp_send
                                          failed"
>>>>>>>>"ERROR:tm:t_forward_nonack:
                                          sending request failed" 
>>>>>>>>
>>>>>>>>Please help. Thank you.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
_______________________________________________
Users mailing list Users at lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users 
>>>>>>
>>>>
>>

_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20121111/fe29733d/attachment.htm>