[OpenSIPS-Users] 404 Not Found error with Sipp UAC
Steve Mitchell
swmitchell at gmail.com
Fri Nov 9 23:08:21 CET 2012
Thanks Ali! That's perfect.
Steve
On Fri, Nov 9, 2012 at 8:50 AM, Ali Pey <alipey at gmail.com> wrote:
> Hi Steve,
>
> The request-uri in your invite is to "service". In your opensips script,
> it does a lookup on user and I don't think you have the user "service"
> registered.
>
> Either have sipp to register first, or in your opensips.cfg, put a
> condition for calls from sipp to go to route one directly with no lookup.
>
> Hope this is clear enough.
>
> Regards,
> Ali Pey
>
>
> On Thu, Nov 8, 2012 at 8:05 PM, Steve Mitchell <swmitchell at gmail.com>wrote:
>
>> Hi,
>>
>> I'm trying to get a simple scenario working to generate CDRs in bulk and
>> am using a basic configuration (generated with osipconfig) with the sipp
>> UAC. However, I continue to get a 404 Not Found response to the INVITE. My
>> config and UAC file are below.
>>
>> Any thoughts?
>>
>> Thanks much!
>>
>> Steve
>>
>> #
>> # $Id: opensips_residential.m4 9042 2012-05-17 13:57:10Z vladut-paiu $
>> #
>> # OpenSIPS residential configuration script
>> # by OpenSIPS Solutions <team at opensips-solutions.com>
>> #
>> # This script was generated via "make menuconfig", from
>> # the "Residential" scenario.
>> # You can enable / disable more features / functionalities by
>> # re-generating the scenario with different options.#
>> #
>> # Please refer to the Core CookBook at:
>> # http://www.opensips.org/Resources/DocsCookbooks
>> # for a explanation of possible statements, functions and parameters.
>> #
>>
>>
>> ####### Global Parameters #########
>>
>> debug=6
>> fork=no
>> log_stderror=yes
>> log_facility=LOG_LOCAL1
>>
>> #fork=yes
>> #children=4
>>
>> /* uncomment the following lines to enable debugging */
>> #debug=6
>> #fork=no
>> #log_stderror=yes
>>
>> /* uncomment the next line to enable the auto temporary blacklisting of
>> not available destinations (default disabled) */
>> #disable_dns_blacklist=no
>>
>> /* uncomment the next line to enable IPv6 lookup after IPv4 dns
>> lookup failures (default disabled) */
>> #dns_try_ipv6=yes
>>
>> /* comment the next line to enable the auto discovery of local aliases
>> based on revers DNS on IPs */
>> auto_aliases=no
>>
>>
>> listen=udp:10.145.185.49:5060 # CUSTOMIZE ME
>>
>> disable_tcp=no
>> listen=tcp:10.145.185.49:5060 # CUSTOMIZE ME
>>
>> disable_tls=yes
>>
>>
>> ####### Modules Section ########
>>
>> #set module path
>> mpath="/usr/local/opensips_proxy/lib64/opensips/modules/"
>>
>> #### SIGNALING module
>> loadmodule "signaling.so"
>>
>> #### StateLess module
>> loadmodule "sl.so"
>>
>> #### Transaction Module
>> loadmodule "tm.so"
>> modparam("tm", "fr_timer", 5)
>> modparam("tm", "fr_inv_timer", 30)
>> modparam("tm", "restart_fr_on_each_reply", 0)
>> modparam("tm", "onreply_avp_mode", 1)
>>
>> #### Record Route Module
>> loadmodule "rr.so"
>> /* do not append from tag to the RR (no need for this script) */
>> modparam("rr", "append_fromtag", 0)
>>
>> #### MAX ForWarD module
>> loadmodule "maxfwd.so"
>>
>> #### SIP MSG OPerationS module
>> loadmodule "sipmsgops.so"
>>
>> #### FIFO Management Interface
>> loadmodule "mi_fifo.so"
>> modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
>> modparam("mi_fifo", "fifo_mode", 0666)
>>
>>
>> #### URI module
>> loadmodule "uri.so"
>> modparam("uri", "use_uri_table", 0)
>>
>>
>>
>>
>> #### MYSQL module
>> loadmodule "db_mysql.so"
>>
>> #### USeR LOCation module
>> loadmodule "usrloc.so"
>> modparam("usrloc", "nat_bflag", 10)
>> modparam("usrloc", "db_mode", 2)
>> modparam("usrloc", "db_url",
>> "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
>>
>>
>> #### REGISTRAR module
>> loadmodule "registrar.so"
>> modparam("registrar", "tcp_persistent_flag", 7)
>>
>> /* uncomment the next line not to allow more than 10 contacts per AOR */
>> #modparam("registrar", "max_contacts", 10)
>>
>> #### ACCounting module
>> loadmodule "acc.so"
>> /* what special events should be accounted ? */
>> modparam("acc", "early_media", 0)
>> modparam("acc", "report_cancels", 0)
>> /* by default we do not adjust the direct of the sequential requests.
>> if you enable this parameter, be sure the enable "append_fromtag"
>> in "rr" module */
>> modparam("acc", "detect_direction", 0)
>> modparam("acc", "failed_transaction_flag", 3)
>> /* account triggers (flags) */
>> modparam("acc", "db_flag", 1)
>> modparam("acc", "db_missed_flag", 2)
>> modparam("acc", "db_url",
>> "mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ####### Routing Logic ########
>>
>> # main request routing logic
>>
>> route{
>>
>>
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> exit;
>> }
>>
>> if (has_totag()) {
>> # sequential request withing a dialog should
>> # take the path determined by record-routing
>> if (loose_route()) {
>>
>> if (is_method("BYE")) {
>> setflag(1); # do accounting ...
>> setflag(3); # ... even if the transaction fails
>> } else if (is_method("INVITE")) {
>> # even if in most of the cases is useless, do RR for
>> # re-INVITEs alos, as some buggy clients do change route
>> set
>> # during the dialog.
>> record_route();
>> }
>>
>>
>>
>> # route it out to whatever destination was set by
>> loose_route()
>> # in $du (destination URI).
>> route(1);
>> } else {
>>
>> if ( is_method("ACK") ) {
>> if ( t_check_trans() ) {
>> # non loose-route, but stateful ACK; must be an ACK
>> after
>> # a 487 or e.g. 404 from upstream server
>> t_relay();
>> exit;
>> } else {
>> # ACK without matching transaction ->
>> # ignore and discard
>> exit;
>> }
>> }
>> sl_send_reply("404","Not here");
>> }
>> exit;
>> }
>>
>> # CANCEL processing
>> if (is_method("CANCEL"))
>> {
>> if (t_check_trans())
>> t_relay();
>> exit;
>> }
>>
>> t_check_trans();
>>
>> if ( !(is_method("REGISTER") ) ) {
>>
>> if (from_uri==myself)
>>
>> {
>>
>> } else {
>> # if caller is not local, then called number must be local
>>
>> if (!uri==myself) {
>> send_reply("403","Rely forbidden");
>> exit;
>> }
>> }
>>
>> }
>>
>> # preloaded route checking
>> if (loose_route()) {
>> xlog("L_ERR",
>> "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
>> if (!is_method("ACK"))
>> sl_send_reply("403","Preload Route denied");
>> exit;
>> }
>>
>> # record routing
>> if (!is_method("REGISTER|MESSAGE"))
>> record_route();
>>
>> # account only INVITEs
>> if (is_method("INVITE")) {
>>
>> setflag(1); # do accounting
>> }
>>
>>
>> if (!uri==myself) {
>> append_hf("P-hint: outbound\r\n");
>>
>> route(1);
>> }
>>
>> # requests for my domain
>>
>> if (is_method("PUBLISH|SUBSCRIBE"))
>> {
>> sl_send_reply("503", "Service Unavailable");
>> exit;
>> }
>>
>> if (is_method("REGISTER"))
>> {
>>
>>
>> if ( proto==TCP || 0 ) setflag(7);
>>
>> if (!save("location"))
>> sl_reply_error();
>>
>> exit;
>> }
>>
>> if ($rU==NULL) {
>> # request with no Username in RURI
>> sl_send_reply("484","Address Incomplete");
>> exit;
>> }
>>
>>
>>
>>
>>
>>
>>
>> # do lookup with method filtering
>> if (!lookup("location","m")) {
>>
>>
>> t_newtran();
>> t_reply("404", "Not Found");
>> exit;
>> }
>>
>>
>>
>> # when routing via usrloc, log the missed calls also
>> setflag(2);
>> route(1);
>> }
>>
>>
>> route[1] {
>> # for INVITEs enable some additional helper routes
>> if (is_method("INVITE")) {
>>
>>
>>
>> t_on_branch("2");
>> t_on_reply("2");
>> t_on_failure("1");
>> }
>>
>>
>>
>> if (!t_relay()) {
>> send_reply("500","Internal Error");
>> };
>> exit;
>> }
>>
>>
>>
>>
>> branch_route[2] {
>> xlog("new branch at $ru\n");
>> }
>>
>>
>> onreply_route[2] {
>>
>> xlog("incoming reply\n");
>> }
>>
>>
>> failure_route[1] {
>> if (t_was_cancelled()) {
>> exit;
>> }
>>
>> # uncomment the following lines if you want to block client
>> # redirect based on 3xx replies.
>> ##if (t_check_status("3[0-9][0-9]")) {
>> ##t_reply("404","Not found");
>> ## exit;
>> ##}
>>
>>
>> }
>>
>>
>>
>>
>>
>> <?xml version="1.0" encoding="ISO-8859-1" ?>
>> <!DOCTYPE scenario SYSTEM "sipp.dtd">
>>
>> <!-- This program is free software; you can redistribute it and/or
>> -->
>> <!-- modify it under the terms of the GNU General Public License as
>> -->
>> <!-- published by the Free Software Foundation; either version 2 of the
>> -->
>> <!-- License, or (at your option) any later version.
>> -->
>> <!--
>> -->
>> <!-- This program is distributed in the hope that it will be useful,
>> -->
>> <!-- but WITHOUT ANY WARRANTY; without even the implied warranty of
>> -->
>> <!-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> -->
>> <!-- GNU General Public License for more details.
>> -->
>> <!--
>> -->
>> <!-- You should have received a copy of the GNU General Public License
>> -->
>> <!-- along with this program; if not, write to the
>> -->
>> <!-- Free Software Foundation, Inc.,
>> -->
>> <!-- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> -->
>> <!--
>> -->
>> <!-- Sipp default 'uac' scenario.
>> -->
>> <!--
>> -->
>>
>> <scenario name="Basic Sipstone UAC">
>> <!-- In client mode (sipp placing calls), the Call-ID MUST be
>> -->
>> <!-- generated by sipp. To do so, use [call_id] keyword.
>> -->
>> <send retrans="1000">
>> <![CDATA[
>>
>> INVITE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
>> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
>> From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[call_number]
>> To: sut <sip:[service]@[remote_ip]:[remote_port]>
>> Call-ID: [call_id]
>> CSeq: 1 INVITE
>> Contact: sip:sipp@[local_ip]:[local_port]
>> Max-Forwards: 70
>> Subject: Performance Test
>> Content-Type: application/sdp
>> Content-Length: [len]
>>
>> v=0
>> o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]
>> s=-
>> c=IN IP[media_ip_type] [media_ip]
>> t=0 0
>> m=audio [media_port] RTP/AVP 0
>> a=rtpmap:0 PCMU/8000
>>
>> ]]>
>> </send>
>>
>> <recv response="100"
>> optional="true">
>> </recv>
>>
>> <recv response="180" optional="true">
>> </recv>
>>
>> <!-- By adding rrs="true" (Record Route Sets), the route sets
>> -->
>> <!-- are saved and used for following messages sent. Useful to test
>> -->
>> <!-- against stateful SIP proxies/B2BUAs.
>> -->
>> <recv response="200" rtd="true" rrs="true">
>> </recv>
>>
>> <!-- Packet lost can be simulated in any send/recv message by
>> -->
>> <!-- by adding the 'lost = "10"'. Value can be [1-100] percent.
>> -->
>> <send>
>> <![CDATA[
>>
>> ACK [next_url] SIP/2.0
>> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
>> From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[call_number]
>> To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param]
>> [routes]
>> Call-ID: [call_id]
>> CSeq: 1 ACK
>> Contact: sip:sipp@[local_ip]:[local_port]
>> Max-Forwards: 70
>> Subject: Performance Test
>> Content-Length: 0
>>
>> ]]>
>> </send>
>>
>> <!-- This delay can be customized by the -d command-line option
>> -->
>> <!-- or by adding a 'milliseconds = "value"' option here.
>> -->
>> <pause milliseconds="10000"/>
>>
>>
>> <!-- The 'crlf' option inserts a blank line in the statistics report.
>> -->
>> <send retrans="1000">
>> <![CDATA[
>>
>> BYE [next_url] SIP/2.0
>> Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
>> From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[call_number]
>> To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param]
>> [routes]
>> Call-ID: [call_id]
>> CSeq: 2 BYE
>> Contact: sip:sipp@[local_ip]:[local_port]
>> Max-Forwards: 70
>> Subject: Performance Test
>> Content-Length: 0
>>
>> ]]>
>> </send>
>>
>> <recv response="200" crlf="true">
>> </recv>
>>
>> <!-- definition of the response time repartition table (unit is ms)
>> -->
>> <ResponseTimeRepartition value="500, 1000, 1500, 2000"/>
>>
>> <!-- definition of the call length repartition table (unit is ms)
>> -->
>> <CallLengthRepartition value="500"/>
>>
>> </scenario>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20121109/37968860/attachment-0001.htm>
More information about the Users
mailing list