[OpenSIPS-Users] cdr_flag not working in v1.7

[Razvan Crainea]

Sorry, small typo. The proper code should be:

if (is_method("INVITE") && !has_totag())
     setflag(2);

Regards!

--
Răzvan Crainea
OpenSIPS Developer
http://www.opensips-solutions.com


On 03/23/2012 06:20 PM, Razvan Crainea wrote:
> Hello, Sebastien!
>
> The problem is that you should set the cdr_flag only for the initial 
> INVITEs. If you also set it for the BYE messages, the acc module will 
> consider that you want to separately dump the BYE in the database, 
> regardless the cdr automatic behaviour.
>
> So the proper way to use the cdr accounting is to set the cdr_flag 
> only for initial INVITEs:
>
> if (is_method("INVITE") && has_totag())
>     setflag(2);
>
> Regards,
>
> -- 
> Răzvan Crainea
> OpenSIPS Developer
> http://www.opensips-solutions.com
>
>
> On 03/23/2012 04:41 PM, Sebastien CRUAUX wrote:
>> Hi Razvan,
>>
>> I dug up this thread because I am facing the same issue as John and I 
>> am not sure I understood your answer.
>> What should be done in order to make the cdr_flag work with opensips 
>> 1.7 ?
>>
>> Regards,
>>
>> Sebastien
>>
>> Le 20/09/2011 18:23, Razvan Crainea a écrit :
>>> Hi John,
>>>
>>> The problem is here:
>>>
>>>             if (method=="INVITE" || method=="BYE") {
>>>                 # Write CDR records to the database
>>>                 setflag(2);
>>>             }
>>>
>>> For any sequential request, the CDR engine ignores the flag (2 in 
>>> your case). But the standard accounting will still notice it, and 
>>> therefore will log the
>>> BYE into the database. Deleting this lines above should no longer 
>>> account it.
>>> Anyway, I guess that the INVITE has all the fields filled properly 
>>> (especially duration and setuptime), right?
>>>
>>> Regards,
>>>
>>> -- 
>>> Răzvan Crainea
>>> OpenSIPS Developer
>>>
>>>
>>> On 20.09.2011 19:07, John Quick wrote:
>>>> My favourite module (dialog) got even better when the cdr_flag 
>>>> option was
>>>> added. I use it all the time now.
>>>>
>>>> But it doesn't seem to be working in version 1.7. I know the call is
>>>> creating a dialog because db_mode is set to 1 and the record can be 
>>>> seen in
>>>> the dialog table while the call is active. However, 2 records are 
>>>> written to
>>>> the acc table - one for the INVITE and another for the BYE. So 
>>>> cdr_flag is
>>>> being ignored. Is this a problem in v1.7 or have I done something 
>>>> wrong?
>>>>
>>>> Here's the relevant bits from opensips.cfg:
>>>> modparam("acc", "db_flag", 2)
>>>> modparam("acc", "cdr_flag", 2)
>>>> modparam("acc", "db_missed_flag", 3)
>>>> modparam("acc", "failed_transaction_flag", 3)
>>>> modparam("acc", "report_cancels", 1)
>>>> modparam("acc", "detect_direction", 1)
>>>> modparam("acc", "db_extra", "authid=$avp(authid); srcip=$si; 
>>>> called=$rU;
>>>> route=$rd; cli=$fU")
>>>>
>>>> modparam("dialog", "db_mode", 1)        # 1 during testing; 0 or 3 for
>>>> production
>>>> modparam("dialog", "dlg_match_mode", 1)
>>>> modparam("dialog", "rr_param", "scdg")  # unique rr tag value in 
>>>> case other
>>>> opensips servers in route
>>>> modparam("dialog", "default_timeout", 14400)   # default timeout 
>>>> set to 4
>>>> hours
>>>>
>>>> route[3]
>>>>      if (method=="INVITE" || method=="BYE") {
>>>>          # Write CDR records to the database
>>>>          setflag(2);
>>>>          # ...and missed calls too
>>>>          setflag(3);
>>>>      }
>>>>
>>>>      if (method=="INVITE") {
>>>>          # make OpenSIPS create a dialog record (see dialog module 
>>>> for info)
>>>>          create_dialog();
>>>>      }
>>>>
>>>> ...and my loose routing section:
>>>>      if (has_totag()) {
>>>>          if (loose_route()) {
>>>>              # Attempt to match this request with an existing dialog
>>>>              match_dialog();
>>>>
>>>>              # Check authentication of re-invites - don't challenge 
>>>> if from a
>>>> known address
>>>>              if(method=="INVITE"&&
>>>> (!check_address("0","$si","$sp","$proto"))) {
>>>>                  if (!proxy_authorize("","subscriber")) {
>>>>                        proxy_challenge("","1");
>>>>                        exit;
>>>>                  };
>>>>              };
>>>>
>>>>              if (method=="INVITE" || method=="BYE") {
>>>>                  # Write CDR records to the database
>>>>                  setflag(2);
>>>>              }
>>>>
>>>>
>>>> John Quick
>>>> Smartvox Limited
>>>> Web: www.smartvox.co.uk
>>>>
>>>> Smartvox is a limited company, registered in England and Wales, number
>>>> 5005263.
>>>> Registered office: Spectrum House, Dunstable Road, Redbourn, 
>>>> St.Albans,
>>>> Herts AL3 7PR
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users