[OpenSIPS-Users] Users Digest, Vol 44, Issue 25

SamyGo govoiper at gmail.com
Mon Mar 19 06:27:59 CET 2012


Hi Talha,
Just a friendly suggestion if you're very new to this. Instead of making
some custom configuration with your own hands try running any sample
configuration file which is closer to your voip-setup (in terms of network
connectivity). For that I'd again like you to describe your setup. What is
it that you're trying to make and how is it setup so far !?

Regards,
Sammy.

On Sat, Mar 17, 2012 at 2:01 AM, Alex Ionescu <alex at opensips.org> wrote:

>  Hi,
>
> I think that, a first step, in your case would be to use
> "advertised_address".
> Here, read this:
> http://www.opensips.org/Resources/DocsCoreFcn17#toc24
>
> Regards,
> Alex
>
>
>
> On 03/16/2012 08:51 PM, talha jilal wrote:
>
>  I appologise for That Bogdan,  Any suggesion ?
>
> Thanks !
>
> Talha Jilal
>
>
>
>  ------------------------------
> Date: Fri, 16 Mar 2012 19:55:00 +0200
> From: bogdan at opensips.org
> To: talha_jilal at hotmail.com
> CC: users at lists.opensips.org
> Subject: Re: Users Digest, Vol 44, Issue 25
>
> Hey, considering that you get free help, culminating with the fact you
> have almost 0 knowledge in basic stuff (like making a simple network
> capture), I would not complain AT ALL about taking too long. So please be
> at least grateful for the help you get.
>
> The problem is your setup - to spare some time, you should mention that
> you actually run opensips behind NAT and you receive traffic from public
> internet. OpenSIPS is adding a RR header with a private IP which is not
> routable from the caller side (public internet), so caller cannot fire the
> ACK as response to the received 200 OK.
>
> So, your setup is bogus.
>
> Regards,
> Bogdan
>
> On 03/16/2012 04:40 PM, talha jilal wrote:
>
> Hi,
>
>  Here you find output ,
>
>  http://pastebin.com/ivWcFaXi
>
> Thanks for your help, can I get reply soon. Its taking too long.
>
>
>  Thanks !
>  ------------------------------
> Date: Fri, 16 Mar 2012 13:52:36 +0200
> From: bogdan at opensips.org
> To: talha_jilal at hotmail.com
> CC: users at lists.opensips.org
> Subject: Re: Users Digest, Vol 44, Issue 25
>
> Hi,
>
> To get ngrep to filter the capturing on "300" do :
>     ngrep -d any -W byline -t *300* port 5060
>
> upload the output somewhere on pastebin or similar - this mailing list is
> limited to attachments of 40K.
>
> Regards,
> Bogdan
>
> On 03/15/2012 04:54 PM, talha jilal wrote:
>
>
> Hello Bogdan,
>
>
>  Here is my ngrep output, for only 300 extension where I am calling.  I
> also attached ngrep full out put from when I start calling till end.
>
>
>
>
>  To: <sip:300 at svoice.dyndns.org;user=phone>;tag=4249013220.
> Contact: "300" <sip:300 at 192.168.1.104:5060;transport=udp>.
> i="300"<sip:>.
> a=X-NameLabel:300.
> To: <sip:300 at svoice.dyndns.org;user=phone>;tag=4249013220.
> Contact: "300" <sip:300 at 192.168.1.104:5060;transport=udp>.
> i="300"<sip:>.
>
> ^C
>
>  *
> *
> *
> *
> *Thanks !
> Talha Jilal
>
> *
>
>  ------------------------------
> Date: Wed, 14 Mar 2012 14:22:23 +0200
> From: bogdan at opensips.org
> To: talha_jilal at hotmail.com
> CC: users at lists.opensips.org
> Subject: Re: Users Digest, Vol 44, Issue 25
>
> I mentioned ngrep, not grep :D .
>
> Do :
>     ngrep -d any -W byline -t . port 5060
>
> Regards,
> Bogdan
>
> On 03/12/2012 08:54 PM, talha jilal wrote:
>
>
> Hi,
>
>
> Here is output with grep
>
>  Please advise me full command if I am doing some thing wrong, I am using
>  centos 6.0 32 bit.
>
>
>
>  -bash-4.1#  tcpdump -i eth2 -n -s0 -vvv tcp  port 5060  | grep 300
> tcpdump: listening on eth2, link-type EN10MB (Ethernet), capture size
> 65535 bytes
>
>
>
>  07:51:21.257355 IP (tos 0x0, ttl 118, id 27728, offset 0, flags [DF],
> proto TCP (6), length 1300)
> 07:51:27.511152 IP (tos 0x10, ttl 64, id 6173, offset 0, flags [DF], proto
> TCP (6), length 1300)
> 07:51:28.015258 IP (tos 0x10, ttl 64, id 6175, offset 0, flags [DF], proto
> TCP (6), length 1300)
> 07:51:29.022329 IP (tos 0x10, ttl 64, id 6177, offset 0, flags [DF], proto
> TCP (6), length 1300)
>
>
>
>
>  Thanks
>
>  ------------------------------
> Date: Mon, 12 Mar 2012 20:30:10 +0200
> From: bogdan at opensips.org
> To: talha_jilal at hotmail.com; users at lists.opensips.org
> Subject: Re: Users Digest, Vol 44, Issue 25
>
> Hi,
>
> 1) please keep the list at CC all the time !
>
> 2) the tcpdump output is no enough - use ngrep as I need to see the actual
> content of the SIP package ; or make a pcap capture and upload it somewhere
> for download.
>
> Regards,
> Bogdan
>
>
> --
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>
>
>
> --
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>
>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120319/c54d9652/attachment.htm>


More information about the Users mailing list