[OpenSIPS-Users] Users Digest, Vol 44, Issue 25

Fri Mar 16 15:40:31 CET 2012

Hi, 
Here you find output , 
http://pastebin.com/ivWcFaXi  

Thanks for your help, can I get reply soon. Its taking too long.

Thanks ! 
Date: Fri, 16 Mar 2012 13:52:36 +0200
From: bogdan at opensips.org
To: talha_jilal at hotmail.com
CC: users at lists.opensips.org
Subject: Re: Users Digest, Vol 44, Issue 25

    Hi,

    To get ngrep to filter the capturing on "300" do :

        ngrep -d any -W byline -t 300 port 5060

    upload the output somewhere on pastebin or similar - this mailing
    list is limited to attachments of 40K. 

    Regards,

    Bogdan

    On 03/15/2012 04:54 PM, talha jilal wrote:

        Hello Bogdan, 

        Here is my ngrep output, for only 300 extension where I am
          calling.  I also attached ngrep full out put from when I start
          calling till end.

          To:
            <sip:300 at svoice.dyndns.org;user=phone>;tag=4249013220.
          Contact: "300"
            <sip:300 at 192.168.1.104:5060;transport=udp>.
          i="300"<sip:>.
          a=X-NameLabel:300.
          To:
            <sip:300 at svoice.dyndns.org;user=phone>;tag=4249013220.
          Contact: "300"
            <sip:300 at 192.168.1.104:5060;transport=udp>.
          i="300"<sip:>.

          ^C

          Thanks ! 

                Talha Jilal 

              Date: Wed, 14 Mar 2012 14:22:23
              +0200

              From: bogdan at opensips.org

              To: talha_jilal at hotmail.com

              CC: users at lists.opensips.org

              Subject: Re: Users Digest, Vol 44, Issue 25

              I mentioned ngrep, not grep :D .

              Do :

                  ngrep -d any -W byline -t . port 5060

              Regards,

              Bogdan

              On 03/12/2012 08:54 PM, talha jilal wrote:

                  Hi, 

                    Here is output with grep 

                  Please advise me full command if I am doing some
                    thing wrong, I am using  centos 6.0 32 bit.

                    -bash-4.1#  tcpdump -i eth2 -n -s0 -vvv tcp
                       port 5060  | grep 300
                    tcpdump: listening on eth2, link-type EN10MB
                      (Ethernet), capture size 65535 bytes

                    07:51:21.257355 IP (tos 0x0, ttl 118, id 27728,
                      offset 0, flags [DF], proto TCP (6), length 1300)
                    07:51:27.511152 IP (tos 0x10, ttl 64, id 6173,
                      offset 0, flags [DF], proto TCP (6), length 1300)
                    07:51:28.015258 IP (tos 0x10, ttl 64, id 6175,
                      offset 0, flags [DF], proto TCP (6), length 1300)
                    07:51:29.022329 IP (tos 0x10, ttl 64, id 6177,
                      offset 0, flags [DF], proto TCP (6), length 1300)

                    Thanks 

                        Date: Mon, 12 Mar 2012
                        20:30:10 +0200

                        From: bogdan at opensips.org

                        To: talha_jilal at hotmail.com;
                        users at lists.opensips.org

                        Subject: Re: Users Digest, Vol 44, Issue 25

                        Hi, 

                        1) please keep the list at CC all the time !

                        2) the tcpdump output is no enough - use ngrep
                        as I need to see the actual content of the SIP
                        package ; or make a pcap capture and upload it
                        somewhere for download.

                        Regards,

                        Bogdan

    -- 
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120316/09440be1/attachment.htm>