[OpenSIPS-Users] Dialogs not getting removed upon receiving BYE
Dinusha Kannangara
dinusha.kannangara at gmail.com
Mon Jun 11 17:38:50 CEST 2012
Thanks, did cookie did the trick for me ;)
Now it working fine.
On Fri, Jun 8, 2012 at 10:02 PM, Bogdan-Andrei Iancu <bogdan at opensips.org>wrote:
> **
> Hi Dinusha,
>
> Most probably OpenSIPS does not "see" the BYE - this may happen because:
> - BYE is not reaching opensips
> - BYE does not have in RR header the "did" cookie
>
> Try to run opensips in full debug (set debug=6) and post the log related
> to the BYE processing, to see what is going on there.
>
> Regards,
>
> Bogdan-Andrei Iancu
> OpenSIPS Founder and Developerhttp://www.opensips-solutions.com
>
>
> On 06/07/2012 11:04 AM, Dinusha Kannangara wrote:
>
> Hi,
>
> I'm new to opensips, and I'm having trouble with dialogs created from the
> load_balancing module not being removed upon receiving the BYE when the
> call is terminated.
> I'm using opensips version 1.7.2 and have followed this example as well (
> http://www.opensips.org/Resources/DocsTutLoadbalancing
> ).
>
> Currently I'm testing it on two sip phones which are registered on the
> opensips SIP Router (at times I'm using one sip phone as both the caller
> and callee, rewriting the destination uri (automatically done through the
> load_balance() method) as my IP to route the call back to the same sip
> phone). Either way the dialog is not destroyed on bye and Wireshark output
> shows that I'm receiving the 200 OK to both sides and the call gets cut
> without any problem.
>
> So, am I missing something on the config file ? Here's my config file....
>
> *opensips.cfg*
>
> ####### Global Parameters #########
>
> debug=6
> log_stderror=yes
> log_facility=LOG_LOCAL0
>
> fork=yes
> children=4
>
> /* uncomment the following lines to enable debugging */
>
> /* uncomment the next line to disable TCP (default on) */
> #disable_tcp=yes
>
> /* uncomment the next line to enable the auto temporary blacklisting of
> not available destinations (default disabled) */
> #disable_dns_blacklist=no
>
> /* uncomment the next line to enable IPv6 lookup after IPv4 dns
> lookup failures (default disabled) */
> #dns_try_ipv6=yes
>
> /* uncomment the next line to disable the auto discovery of local aliases
> based on revers DNS on IPs (default on) */
> #auto_aliases=no
> /* uncomment the following lines to enable TLS support (default off) */
> #disable_tls = no
> #listen = tls:your_IP:5061
> #tls_verify_server = 1
> #tls_verify_client = 1
> #tls_require_client_certificate = 0
> #tls_method = TLSv1
> #tls_certificate = "//etc/opensips/tls/user/user-cert.pem"
> #tls_private_key = "//etc/opensips/tls/user/user-privkey.pem"
> #tls_ca_list = "//etc/opensips/tls/user/user-calist.pem"
>
> /* default db_url to be used by modules requiring DB connection;
> uncomment it if you use any module requiring DB connectivity */
> #db_default_url="mysql://opensips:opensipsrw@localhost/opensips"
>
>
> port=5060
>
> /* uncomment and configure the following line if you want opensips to
> bind on a specific interface/port/proto (default bind on all available)
> */
> #listen=udp:192.168.1.2:5060
>
>
>
>
> ####### Modules Section ########
>
> #set module path
> mpath="//lib64/opensips/modules/"
>
> /* uncomment next line for MySQL DB support */
> loadmodule "db_mysql.so"
> loadmodule "signaling.so"
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "mi_fifo.so"
> loadmodule "uri.so"
> loadmodule "acc.so"
> loadmodule "avpops.so"
> loadmodule "dialog.so"
> loadmodule "load_balancer.so"
> /* uncomment next lines for MySQL based authentication support
> NOTE: a DB (like db_mysql) module must be also loaded */
> loadmodule "auth.so"
> loadmodule "auth_db.so"
> /* uncomment next line for aliases support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #loadmodule "alias_db.so"
> /* uncomment next line for multi-domain support
> NOTE: a DB (like db_mysql) module must be also loaded
> NOTE: be sure and enable multi-domain support in all used modules
> (see "multi-module params" section ) */
> #loadmodule "domain.so"
> /* uncomment the next two lines for presence server support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #loadmodule "presence.so"
> #loadmodule "presence_xml.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
>
> # ----- mi_fifo params -----
> modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
>
>
> # ----- rr params -----
> # do not append from tag to the RR (no need for this script)
> modparam("rr", "append_fromtag", 0)
>
>
> # ----- registrar params -----
> /* uncomment the next line not to allow more than 10 contacts per AOR */
> #modparam("registrar", "max_contacts", 10)
> # ----- usrloc params -----
> modparam("usrloc", "db_mode", 0)
> /* uncomment the following lines if you want to enable DB persistency
> for location entries */
> #modparam("usrloc", "db_mode", 2)
> #modparam("usrloc", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
>
>
> # ----- uri params -----
> modparam("uri", "use_uri_table", 0)
>
>
> # ----- acc params -----
> /* what sepcial events should be accounted ? */
> modparam("acc", "early_media", 1)
> modparam("acc", "report_cancels", 1)
> /* by default ww do not adjust the direct of the sequential requests.
> if you enable this parameter, be sure the enable "append_fromtag"
> in "rr" module */
> modparam("acc", "detect_direction", 0)
> /* account triggers (flags) */
> modparam("acc", "failed_transaction_flag", 3)
> modparam("acc", "log_flag", 1)
> modparam("acc", "log_missed_flag", 2)
> /* uncomment the following lines to enable DB accounting also */
> modparam("acc", "db_flag", 1)
> modparam("acc", "db_missed_flag", 2)
>
> #--------load_balance-------#
> modparam("load_balancer", "db_url","mysql://root:123@localhost/opensips")
>
> #---------Dialog-----------#
> #modparam("dialog", "dlg_flag", 13)
>
>
> # ----- auth_db params -----
> /* uncomment the following lines if you want to enable the DB based
> authentication */
> #modparam("auth_db", "calculate_ha1", yes)
> #modparam("auth_db", "password_column", "password")
> modparam("auth_db", "db_url", "mysql://root:123@localhost/opensips")
> #modparam("auth_db", "load_credentials", "")
>
>
> # ----- alias_db params -----
> /* uncomment the following lines if you want to enable the DB based
> aliases */
> #modparam("alias_db", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
>
>
> # ----- domain params -----
> /* uncomment the following lines to enable multi-domain detection
> support */
> #modparam("domain", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
> #modparam("domain", "db_mode", 1) # Use caching
>
>
> # ----- multi-module params -----
> /* uncomment the following line if you want to enable multi-domain support
> in the modules (dafault off) */
> #modparam("auth_db|usrloc|uri", "use_domain", 1)
>
>
> # ----- presence params -----
> /* uncomment the following lines if you want to enable presence */
> #modparam("presence|presence_xml", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
> #modparam("presence_xml", "force_active", 1)
> #modparam("presence", "server_address", "sip:192.168.1.2:5060
>
> ")
>
>
> ####### Routing Logic ########
>
>
> # main request routing logic
> route{
>
> log("\n\n\n----------------------------------------\n\n\n");
>
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> }
>
> if (has_totag()) {
> # sequential request withing a dialog should
> # take the path determined by record-routing
> if (loose_route()) {
> if (is_method("BYE")) {
> setflag(1); # do accounting ...
> setflag(3); # ... even if the transaction
> fails
> } else if (is_method("INVITE")) {
> # even if in most of the cases is useless,
> do RR for
> # re-INVITEs alos, as some buggy clients
> do change route set
> # during the dialog.
> record_route();
> }
> # route it out to whatever destination was set by
> loose_route()
> # in $du (destination URI).
> route(1);
> } else {
> /* uncomment the following lines if you want to
> enable presence */
> ##if (is_method("SUBSCRIBE") && $rd ==
> "your.server.ip.address") {
> ## # in-dialog subscribe requests
> ## route(2);
> ## exit;
> ##}
> if ( is_method("ACK") ) {
> if ( t_check_trans() ) {
> # non loose-route, but stateful
> ACK; must be an ACK after
> # a 487 or e.g. 404 from upstream
> server
> t_relay();
> exit;
> } else {
> # ACK without matching transaction
> ->
> # ignore and discard
> exit;
> }
> }
> sl_send_reply("404","Not here");
> }
> exit;
> }
>
> #initial requests
>
> # CANCEL processing
> if (is_method("CANCEL"))
> {
> if (t_check_trans())
> t_relay();
> exit;
> }
>
> t_check_trans();
>
> # preloaded route checking
> if (loose_route()) {
> xlog("L_ERR",
> "Attempt to route with preloaded Route's
> [$fu/$tu/$ru/$ci]");
> if (!is_method("ACK"))
> sl_send_reply("403","Preload Route denied");
> exit;
> }
>
> # record routing
> if (!is_method("REGISTER|MESSAGE"))
> record_route();
>
> # account only INVITEs
> if (is_method("INVITE"))
> {
> append_hf("P-hint: outbound\r\n");
>
> log("\n\n\n----------INVITE----------\n\n\n");
> load_balance("1","A");
> if ($retcode<0)
> {
> sl_send_reply("500","Service full");
> exit;
> }
> record_route();
> route(1);
> }
>
>
>
>
> if (is_method("PUBLISH"))
> {
> sl_send_reply("503", "Service Unavailable");
> exit;
> }
>
>
> if (is_method("REGISTER"))
> {
>
> log("\n\n\n----------------Register-----------------\n\n\n");
>
> if (!save("location"))
> sl_reply_error();
>
> exit;
> }
>
> if ($rU==NULL) {
> # request with no Username in RURI
> sl_send_reply("484","Address Incomplete");
> exit;
> }
>
> # apply DB based aliases (uncomment to enable)
> ##alias_db_lookup("dbaliases");
>
> # do lookup with method filtering
> if (!lookup("location","m")) {
> switch ($retcode) {
> case -1:
> case -3:
> t_newtran();
> t_reply("404", "Not Found");
> exit;
> case -2:
> sl_send_reply("405", "Method Not
> Allowed");
> exit;
> }
> }
>
> # when routing via usrloc, log the missed calls also
> setflag(2);
>
> route(1);
> }
>
>
> route[1] {
> # for INVITEs enable some additional helper routes
> if (is_method("INVITE")) {
> t_on_branch("2");
> t_on_reply("2");
> t_on_failure("1");
> }
>
> if (!t_relay()) {
> sl_reply_error();
> };
> exit;
> }
> branch_route[2] {
> xlog("new branch at $ru\n");
> }
>
>
> onreply_route[2] {
> xlog("incoming reply\n");
> }
>
>
> failure_route[1] {
> if (t_was_cancelled()) {
> exit;
> }
> }
>
> ---------------
>
> I could give you the opensips debug output as well but due to the message
> being too large I have excluded it... if need it please let me know and I
> will reply with it :)
>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120611/091d5322/attachment-0001.htm>
More information about the Users
mailing list