[OpenSIPS-Users] Lookup location problem on OpenSIPS(multi-domain) + Asterisks
Kook Maeng
winfavor at gmail.com
Wed Aug 29 11:05:54 CEST 2012
Hi, all.
My goal is to building scalable multi-domain(tenant) telephone system using
Opensips with multiple asterisk servers that can be multi-domain.
But I ran into a problem during the progress.
Structure of the system for test is
Opensips(10.10.10.10) ------ Asterisk A(20.02.0.20), Asterisk B(30.30.30.30)
My Opensips modules(auth_db, usrloc, uri) are enabled "use_domain".
Below are flows for test.
Flow 1. Registrar
a : User A (1000 at foo.com) -----register-----> OpenSIPS => 200 OK.
b : User B (2000 at bar.com) -----register-----> OpenSIPS => 200 OK.
Flow 2. User A(1000 at foo.com) call User B(2000 at bar.com)
a : User A -----INVITE-----> OpenSIPS (via load_balancer)
-----INVITE-----> Asterisk A
b : Asterisk A -----Dial(SIP/${EXTEN}@OPENSIPS)-----> OpenSIPS =>
lookup("location) FAILED about 2000 at 10.10.10.10
If "usrloc.so" dont't use domain it works good. but otherwise it fails.
I think the problem occurred because the lookup() find contact using
"userid at domain".
How can I fix this? I will append content of opensips.cfg below.
Would really appreciate it if you can help.
Thanks in advance.
-Kook Maeng
----- opensip.cfg -----
####### Global Parameters #########
alias="14.63.222.202"
advertised_address="14.63.222.202"
#debug=3
#log_stderror=no
log_facility=LOG_LOCAL0
fork=yes
children=4
port=5060
#listen=udp:211.62.253.136
####### Modules Section ########
#set module path
mpath="/usr/lib/opensips/modules/"
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "acc.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "alias_db.so"
loadmodule "domain.so"
loadmodule "permissions.so"
loadmodule "dialog.so"
loadmodule "load_balancer.so"
loadmodule "nathelper.so"
loadmodule "sipmsgops.so"
loadmodule "group.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# ----- rr params -----
modparam("rr", "append_fromtag", 0)
# ----- registrar params -----
modparam("registrar", "max_expires", 60)
modparam("registrar", "min_expires", 60)
# ----- usrloc params -----
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("usrloc", "nat_bflag", 6)
modparam("usrloc", "use_domain", 1)
modparam("usrloc", "timer_interval", 30)
# ----- uri params -----
modparam("uri", "use_uri_table", 0)
modparam("uri", "use_domain", 1)
# ----- acc params -----
modparam("acc", "early_media", 1)
modparam("acc", "report_cancels", 1)
modparam("acc", "detect_direction", 0)
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
# ----- auth_db params -----
modparam("auth_db", "calculate_ha1", 0)
#modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", 1)
# ----- alias_db params -----
modparam("alias_db", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
# ----- domain params -----
modparam("domain", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
# ----- dialog params -----
modparam("dialog", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
modparam("dialog", "db_mode", 1)
#modparam("dialog", "dlg_flag", 4)
# ----- load_balancer params -----
modparam("load_balancer", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
# ----- nathelper params -----
modparam("registrar","received_avp", "$avp(i:42)")
modparam("nathelper","received_avp", "$avp(i:42)")
# ----- permissions params -----
modparam("permissions", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
# ----- group params -----
modparam("group", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
modparam("group", "use_domain", 1)
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
#---- NAT Detection ----#
force_rport();
#if (nat_uac_test("19")) {
if (nat_uac_test("23")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
fix_nated_contact();
}
setflag(5);
}
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction
fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless,
do RR for
# re-INVITEs alos, as some buggy clients do
change route set
# during the dialog.
xlog("################## HAS_TOTAG() INVITE
=> si: $si, sp: $sp ###################\n");
record_route();
}
# route it out to whatever destination was set by
loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you want to
enable presence */
##if (is_method("SUBSCRIBE") && $rd ==
"your.server.ip.address") {
## # in-dialog subscribe requests
## route(2);
## exit;
##}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful
ACK; must be an ACK after
# a 487 or e.g. 404 from upstream
server
t_relay();
exit;
} else {
# ACK without matching transaction
->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain
version*/
if (!(method=="REGISTER") && is_from_local()) /*multidomain
version*/
{
if (!check_source_address("0")) {
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
consume_credentials();
# caller authenticated
#}
}
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR", "Attempt to route with preloaded Route's
[$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
# load balancing
if (!($si =~ "^115.92.199." || $si =~ "^172.27.155.27")) {
load_balance("2","sip");
if ($retcode<0) {
sl_send_reply("500","Service full");
exit;
}
xlog("Selected destination is: $du\n");
setflag(1); # do accounting
#setflag(2);
route(1);
} else {
}
setflag(1); # do accounting
}
#if (!uri==myself)
## replace with following line if multi-domain support is used
if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
# requests for my domain
## uncomment this if you want to enable presence server
## and comment the next 'if' block
## NOTE: uncomment also the definition of route[2] from below
##if( is_method("PUBLISH|SUBSCRIBE"))
## route(2);
if (is_method("PUBLISH"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable
auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if (!db_check_to())
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
#-- Request is begind NAT(flag5) save with bflag 6 --#
if (isflagset(5))
setbflag(6);
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
alias_db_lookup("dbaliases");
# do lookup with method filtering
if (!lookup("location","m")) {
xlog("L_NOTICE","\n######### LOOKUP FAILED($retcode) =>
[$pr:$fu/$tu/$si:$sp] $du: Processing '$rm' ########## \n\n");
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
#break;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
# for INVITEs enable some additional helper routes
if (subst_uri('/(sip:.*);nat=yes/\1/')) {
setbflag(6);
}
if (isflagset(5)) {
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
}
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
};
exit;
}
branch_route[2] {
xlog("new branch at $ru\n");
}
onreply_route[2] {
xlog("incoming reply\n");
if (isbflagset(6)) {
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
append_hf("P-hint: Onreply-route - fixcontact \r\n");
fix_nated_contact();
}
}
failure_route[1] {
if (t_was_cancelled()) {
exit;
}
}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20120829/f35e07b3/attachment-0001.htm>
More information about the Users
mailing list