[OpenSIPS-Users] uac_registrant : forced socket parameter

[Ovidiu Sas]

The difference between trunk and 1.7 is that if a forced socket is
invalid, an error will be printed and opensips will stop.
On 1.7, is a forced socket is invalid, it will be ignored and a
default one will be used.
You can copy the whole module from trunk into your 1.7 repo if you
want to test the new behaviour.

Regards,
Ovidiu Sas

On Thu, Nov 24, 2011 at 9:57 AM, Sebastien CRUAUX <scruaux at halys.fr> wrote:
> Hi Ovidiu,
>
> Sorry about the late reply.
> Are these changes included in the new Opensips 1.7.1 ?
>
> Best regards,
>
> Sebastien
>
> Le 17/11/2011 15:45, Ovidiu Sas a écrit :
>>
>> Actually, it was implemented completely and it is working ok.
>> If the forced socket (in the uac param) is not a valid one, it is
>> discarded and opensips will choose a valid one from it's own list.
>>
>> I pushed a check in the trunk (if a socket is forced and it is
>> invalid, opensips will fail to start).
>> Please pull the latest trunk and try again (you will get an error if
>> you are forcing a bad socket).
>>
>> Regards,
>> Ovidiu Sas
>>
>> On Wed, Nov 16, 2011 at 12:22 PM, Sebastien CRUAUX<scruaux at halys.fr>
>>  wrote:
>>>
>>> Thank you very much for your quick answer Ovidiu ! :)
>>>
>>> Le 16/11/2011 18:15, Ovidiu Sas a écrit :
>>>>
>>>> It seems that you are right.  I forgot to completely implement this
>>>> feature.
>>>> I will take care of it.
>>>>
>>>> Regards,
>>>> Ovidiu Sas
>>>>
>>>> On Wed, Nov 16, 2011 at 12:00 PM, Sebastien CRUAUX<scruaux at halys.fr>
>>>>  wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> It seems that the forced socket parameter in the uac_registrant module
>>>>> is
>>>>> ignored.
>>>>> I have 3 IP addresses on my Opensips server :
>>>>> - 172.17.1.126 on eth0
>>>>> - 172.17.1.13 on eth0:1
>>>>> - 172.17.1.131 on eth1
>>>>>
>>>>> I would like my REGISTER requests to go through the eth1 interface so I
>>>>> used
>>>>> the following line in opensips.cfg :
>>>>>
>>>>> modparam("uac_registrant",
>>>>>
>>>>>
>>>>> "uac","sip:mydomain.org,,sip:my_user at mydomain.org,,my_user,my_password,sip:my_user at my_ip,,,172.17.1.131")
>>>>>
>>>>> However, the REGISTER requests are going out through the IP address
>>>>> 172.17.1.13 (eth0:1 interface). I tried replacing the last parameter of
>>>>> the
>>>>> above line by "udp:172.17.1.131:5060" but the behaviour did not change.
>>>>> Note
>>>>> that Opensips is listening on all 3 IP addresses.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Sebastien
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>



-- 
VoIP Embedded, Inc.
http://www.voipembedded.com