[OpenSIPS-Users] New acc module for cdr generation over Radius

[Abid Saleem]

Dear Razvan,
I have the same problem. Can you please guide me how to configure OpenSIPS to send duration attr in Accounting Stop packet to Radius. I mean if you can provide sample Config, it will be a great help.
Thx
------------------Abid SaleemTerminus Technologies 
> Date: Fri, 20 May 2011 11:52:24 +0300
> From: razvancrainea at opensips.org
> To: users at lists.opensips.org
> Subject: Re: [OpenSIPS-Users] New acc module for cdr generation over Radius
> 
> Hello,
> 
>   If you are using the acc module for CDR generation then only the Stop 
> message should be received by the Radius server. This message should 
> contain all the information you need like duration, startup time, 
> creation time and others.
> 
> Regards,
> Razvan
> 
> On 05/20/2011 02:46 AM, Cindy Leung wrote:
> > I am also not receiving a Start packet on my radius server for some reason.  I'm new to this so please bear with me. :-)
> >
> > modparam("acc", "early_media", 1)
> > modparam("acc", "report_ack", 1)
> > modparam("acc", "report_cancels", 1)
> > modparam("acc", "detect_direction", 0)
> > modparam("acc", "failed_transaction_flag", 3)
> > modparam("acc", "aaa_flag", 1)
> > modparam("acc", "service_type", 15)
> > modparam("acc", "aaa_url", "radius:/etc/radiusclient-ng/radiusclient.conf")
> > modparam("acc", "cdr_flag", 6)
> >
> > I am seeing all the "Intrim-Update" and "Stop" packets.
> >
> > Any suggestions as to what to look for please?  Thanks.
> >
> >
> > Cindy
> >
> >
> > On Apr 29, 2011, at 10:42 AM, Maciej Bylica wrote:
> >
> >> Hi Vlad,
> >>
> >> Thanks for info.
> >> I am about to work on this.
> >>
> >> Thanks,
> >> Maciej
> >>
> >> 2011/4/21 Vlad Paiu<vladpaiu at opensips.org>:
> >>> Hello,
> >>>
> >>> The new CDRs type of accounting in OpenSIPS 1.6.4 only produces one entry
> >>> per call for every type of backend, whether it's a DB, Radius or Syslog. So
> >>> it's natural to only have a single STOP entry per call, and not two, a start
> >>> and stop entry as in the old type of accounting.
> >>>
> >>> The STOP packet should also contain the Sip-Call-Duration and
> >>> Sip-Call-Duration attributes, defined in the 'etc/dictionary.opensips'
> >>> dictionary that comes with the OpenSIPS sources. Are you using that provided
> >>> dictionary ?
> >>>
> >>> Regards,
> >>> Vlad
> >>>
> >>>
> >>> On 04/17/2011 11:38 PM, Maciej Bylica wrote:
> >>>> Dear OS Fans,
> >>>>
> >>>> I've just managed to configure new acc with dialog cdr generation
> >>>> feature with Mysql.etc/dictionary.opensipset
> >>>> It looks fine and realy help to do accouting for some of us.
> >>>> In my scenario there is a need to use Radius.
> >>>> As stated in acc module description, there is a need to use cdr_flag
> >>>> and setflag in initial invite.
> >>>> Once it is set there i do receive only STOP radius acc packet.
> >>>> In case i do not have setflag set anywere in my script Opensips
> >>>> produce START and STOP packet properly.
> >>>> Does anyone knows where to look for the problem?
> >>>>
> >>>> Last question does standard STOP packet incorporate call duration attr
> >>>> anyhow or should i use aaa_extra in my config.
> >>>> My STOP packet is as follows:
> >>>> Sun Apr 17 21:08:38 2011
> >>>>          Acct-Status-Type = Stop
> >>>>          Service-Type = IAPP-Register
> >>>>          Sip-Response-Code = 200
> >>>>          Sip-Method = Bye
> >>>>          Event-Timestamp = "\266:\253M\374\212\256"
> >>>>          Sip-From-Tag = "eb759c18"
> >>>>          Sip-To-Tag = "00-07350-027f5afd-492940963"
> >>>>          Acct-Session-Id =
> >>>> "b0790b4443102642ZTMzOWZlNGU0Njg4MDMwM2EzZjI1NTY5NTllNWFiYjk."
> >>>>          User-Name = "11122233 at 66.66.66.66"
> >>>>          Calling-Station-Id = "sip:11122233 at 66.66.66.66"
> >>>>          Called-Station-Id = "sip:999887766 at 66.66.66.66"
> >>>>          Sip-Translated-Request-URI = "sip:77.77.77.77:5060"
> >>>>          User-Agent = "X-Lite release 1003l stamp 30942"
> >>>>          Contact = "<sip:11122233 at 10.119.204.184:15950>"
> >>>>          NAS-Port-Id = 5060
> >>>>          Acct-Delay-Time = 0
> >>>>          NAS-IP-Address = 127.0.0.1
> >>>>          Client-IP-Address = 127.0.0.1
> >>>>          Acct-Unique-Session-Id = "7e6e2ace14ff4970"
> >>>>          Timestamp = 1303067318
> >>>>
> >>>> I do have the latest OS 1.6.4-2-notls revision 7872.
> >>>>
> >>>> Thx in advance for help,
> >>>> Maciej.
> >>>>
> >>>> _______________________________________________
> >>>> Users mailing list
> >>>> Users at lists.opensips.org
> >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>>
> >>>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users at lists.opensips.org
> >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>
> >> _______________________________________________
> >> Users mailing list
> >> Users at lists.opensips.org
> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> 
> -- 
> Razvan Crainea
> OpenSIPS Developer
> 
> 
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110521/aee575b5/attachment.htm>