[OpenSIPS-Users] Opensips Control Pannel does not take effect into Opensips Server
Dave Singer
dave.singer at wideideas.com
Fri Mar 25 06:13:31 CET 2011
Duong,
That is probably a selinux problem.
I dealt with that a couple months ago and posted a little howto for
easily dealing with selinux problems the right way (not disabling
selinux).
Just google for:
selinux opensips dave
Dave
On Thu, Mar 24, 2011 at 8:57 PM, Duong Manh Truong
<ngoahotanglongbk at gmail.com> wrote:
> Hi Dave!
> I changed my config to
> "$box_id=0;
> // mi host:port pair || fifo_file
> //$boxes[$box_id]['mi']['type']="fifo";
> //$boxes[$box_id]['mi']['fifo']="/tmp/opensips_fifo";
> $boxes[$box_id]['mi']['conn']="127.0.0.1:8000";
> $boxes[$box_id]['mi']['conn']="/tmp/opensips_fifo";
> "
> And i've got the same results: OK with add users only!
> When i hit the "apply changes to server" button, i see this
> "sorry -- cannot open write fifo"
> Or when using MI commands:
> "10:40:18 | opensipsctl online | /tmp/opensips_fifo
> ________________________________
>
> sorry -- cannot open write fifo"
>
> Check the file:
> [root at opensips tmp]# ls -l opensips_fifo
> prw-rw-rw-. 1 root root 0 Mar 25 10:31 opensips_fifo
> I think that file's permission here is ok !!
> Continued checking the opensips.cfg, i had added the lines following
> "
> # ----- mi_fifo params -----
> modparam("mi_fifo", "fifo_mode", 0666)
> modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
> "
> But error is still occured :-(
> My "acc table" has "cdr_id filed", not the "cdr field"
> additionally, i have "Cdrs" table separately.
> Both 2 tables above are empty. (although i made several internal calls)
> And i've checked the "location table" and it truly contained records of
> online users
> (not the presence module as you suggested)
> Please tell me what are the next steps to check ?
> Thanks!
>
>
> 2011/3/25 Dave Singer <dave.singer at wideideas.com>
>>
>> Duong,
>> Sorry. I forgot I modified my CP and those options.
>> You need to have it:
>> $boxes[$box_id]['mi']['conn']="/tmp/opensips_fifo";
>>
>> and remove:
>> $boxes[$box_id]['mi']['type']="fifo";
>> $boxes[$box_id]['mi']['fifo']="/tmp/opensips_fifo";
>>
>> Are you sure cdrs are being recorded (you have seen cdrs in the acc
>> table)?
>> Have you verified online users is using the location (registered
>> users) table and not the presence module fifo/table (I haven't used
>> presence so don't know what is available and how CP would pull
>> presence info).
>> My guess is that online users uses presence module.
>>
>> Dave
>>
>> On Thu, Mar 24, 2011 at 11:31 AM, Duong Manh Truong
>> <ngoahotanglongbk at gmail.com> wrote:
>> > Hi Dave,
>> > My default config in was :
>> > // default: $boxes[$box_id]['mi']['conn']="127.0.0.1:8000";
>> > // default: $boxes[$box_id]['mi']['conn']="/tmp/opensips_fifo";
>> > then i changed it to
>> > $boxes[$box_id]['mi']['type']="fifo";
>> > $boxes[$box_id]['mi']['fifo']="/tmp/opensips_fifo";
>> > And i found some functions of CP works such as: Add/edit users; Add/edit
>> > domain.
>> > But a lot of others still dont work such as: cdrs, show online users,
>> > ........
>> > I see the "apply changes to server" button, i hit it and get this
>> > message
>> > for a new web browser tab:
>> > "http://10.2.14.122/cp/tools/system/domains/apply_changes.php
>> > Cannot connect to OpenSIPS Server via Management Interface ()"
>> > I come to /cp/tools/system/domains but find no "apply_changes.php" file
>> > :-(
>> > Please help me to find out how i can connect to Opensips Server and
>> > making
>> > changes
>> > Thanks!
>> > 2011/3/24 Dave Singer <dave.singer at wideideas.com>
>> >>
>> >> Duong,
>> >>
>> >> The MI commands are for opensips and ps does NOT take any arguments.
>> >> The easiest way for it to connect when on the same box is with fifo.
>> >> Here is a snippet from the boxes.global.inc.php:
>> >> /*==================== DEFINITION OF BOXES (servers)
>> >> ========================*/
>> >> // each server is a box
>> >> $box_id=0;
>> >> $boxes[$box_id]['mi']['type']="fifo";
>> >> $boxes[$box_id]['mi']['fifo']="/tmp/opensips_fifo";
>> >>
>> >> This does require that opensips module mi_fifo is loaded and
>> >> configured with the same path/file as you set in the config above
>> >> (above path is the default path).
>> >> opensipsctl uses it also (unless it was configured to use xmlrpc (not
>> >> sure it can)).
>> >> Opensips xmlrpc module by default lisetns on port 8000, not the sip
>> >> port 5060. That is why you got that message.
>> >> I've not been able to get xmlrpc to compile and work on Centos 5
>> >> servers.
>> >>
>> >> Dave
>> >>
>> >> On Thu, Mar 24, 2011 at 12:17 AM, Duong Manh Truong
>> >> <ngoahotanglongbk at gmail.com> wrote:
>> >> >
>> >> > Thank Dave!
>> >> > When going to the "MI commands" tab, surprisingly i found that
>> >> > "Cannot connect to OpenSIPS Server via Management Interface
>> >> > (127.0.0.1/8000)
>> >> > Execute MI Command"
>> >> >
>> >> > After i executed the "ps -A" command, i only got this
>> >> > "14:02:20 | ps -A | 127.0.0.1:8000"
>> >> > The same result for "opensipsctl online" command
>> >> > "14:04:37 | opensipsctl online | 127.0.0.1:8000"
>> >> > And i think the problem is my CP does not connect to my Opensips
>> >> > server
>> >> > on 5060 port. I remember that i have not configured CP listening port
>> >> > before, it is default :-(
>> >> > (CP & Opensips server were installed in the same machine)
>> >> > Checking these files "db.inc.php" ; local.inc.php; globals.php in
>> >> > the
>> >> > CP config directory "/var/www/opensips-cp/config"
>> >> > I don't see anywhere to config CP listening port !
>> >> > Please help me to figure out, thanks!
>> >> > 2011/3/24 Dave Singer <dave.singer at wideideas.com>
>> >> >>
>> >> >> Duong,
>> >> >>
>> >> >> Yea missed that. :-)
>> >> >> To check basic CP connection to opensips, go to System, MI Commands.
>> >> >> In box under Execute MI Command, put "ps" and click "execute". It
>> >> >> should show a bunch of lines about the opensips processes that are
>> >> >> running.
>> >> >>
>> >> >> As far as showing Online Users, it may be using presence
>> >> >> module/table
>> >> >> rather than active registrations to qualify a user as "online".
>> >> >> Someone else will have to answer that or you can look at the CP
>> >> >> source
>> >> >> code for that answer.
>> >> >>
>> >> >> Dave
>> >> >>
>> >> >> On Wed, Mar 23, 2011 at 12:35 PM, Duong Manh Truong
>> >> >> <ngoahotanglongbk at gmail.com> wrote:
>> >> >> > Thank David,
>> >> >> > But i found that in my opensips.cfg file:
>> >> >> > "
>> >> >> > # ----- usrloc params -----
>> >> >> > # modparam("usrloc", "db_mode", 0)
>> >> >> > /* uncomment the following lines if you want to enable DB
>> >> >> > persistency
>> >> >> > for location entries */
>> >> >> > modparam("usrloc", "db_mode", 2)
>> >> >> > modparam("usrloc", "db_url",
>> >> >> > "mysql://opensips:opensipsrw@localhost/opensips")
>> >> >> > "
>> >> >> > So i think that my "db_mode" is not the cause of my failed CP
>> >> >> > " 2 - Write-Back scheme. This is a combination of previous two
>> >> >> > schemes. All
>> >> >> > changes are made to memory and database synchronization is done in
>> >> >> > the
>> >> >> > timer. The timer deletes all expired contacts and flushes all
>> >> >> > modified or
>> >> >> > new contacts to database. Use this scheme if you encounter
>> >> >> > high-load
>> >> >> > peaks
>> >> >> > and want them to process as fast as possible. The mode will not
>> >> >> > help
>> >> >> > at all
>> >> >> > if the load is high all the time. Also, latency of this mode is
>> >> >> > much
>> >> >> > lower
>> >> >> > than latency of mode 1, but slightly higher than latency of mode
>> >> >> > 0."
>> >> >> > My CP still does not work :-( , even the simple function like
>> >> >> > "show
>> >> >> > online
>> >> >> > user" --- "no data found"
>> >> >> > (While checking by using opensipsctl is ok)
>> >> >> > opensipsctl online
>> >> >> > database engine 'MYSQL' loaded
>> >> >> > Control engine 'FIFO' loaded
>> >> >> > 1001
>> >> >> >
>> >> >> > Please tell me how to check my CP and its connection to Opensips
>> >> >> > server?
>> >> >> > Thanks !
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > ----------------------------------------------------------------------
>> >> >> >
>> >> >> > Message: 1
>> >> >> > Date: Tue, 22 Mar 2011 21:06:21 -0700
>> >> >> > From: Dave Singer <dave.singer at wideideas.com>
>> >> >> > Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not
>> >> >> > take
>> >> >> > effect into Opensips Server
>> >> >> > To: OpenSIPS users mailling list <users at lists.opensips.org>
>> >> >> > Message-ID:
>> >> >> >
>> >> >> > <AANLkTimB=bQZ1buVKaWzMKq2LM=UsLhEsAQWW+uFrrw7 at mail.gmail.com>
>> >> >> > Content-Type: text/plain; charset=ISO-8859-1
>> >> >> >
>> >> >> > The key I think is usrloc db mode is 0, which means db is not
>> >> >> > used.
>> >> >> >
>> >> >> > http://www.opensips.org/html/docs/modules/1.6.x/usrloc.html#id292029
>> >> >> >
>> >> >> > On Tue, Mar 22, 2011 at 6:47 PM, Duong Manh Truong
>> >> >> > <ngoahotanglongbk at gmail.com> wrote:
>> >> >> >> Dear Dave!
>> >> >> >> Thanks for your help.
>> >> >> >> I've checked the opensips.cfg again but i still can not find out
>> >> >> >> what
>> >> >> >> stuff
>> >> >> >> is incorrect ! :-(
>> >> >> >> I attached my config file in this email, hope that will help my
>> >> >> >> problem to
>> >> >> >> be?clearer!
>> >> >> >> If anyone has had the same issue, please tell me how can i check
>> >> >> >> or
>> >> >> >> fix
>> >> >> >> it.
>> >> >> >> (Hope to receive relatively specific informations)
>> >> >> >> Thanks and Best Regards.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> Date: Mon, 21 Mar 2011 08:45:03 -0700
>> >> >> >> From: Dave Singer <dave.singer at wideideas.com>
>> >> >> >> Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not
>> >> >> >> take
>> >> >> >> ? ? ? ?effect into Opensips Server
>> >> >> >> To: OpenSIPS users mailling list <users at lists.opensips.org>
>> >> >> >> Message-ID:
>> >> >> >> ? ? ?
>> >> >> >> ?<AANLkTinGLDzzbUgJgQXOd_93r31hjnHAVAzPMo64K-MQ at mail.gmail.com>
>> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
>> >> >> >>
>> >> >> >> Duong,
>> >> >> >>
>> >> >> >> Some modules, like drouting, you have to click a reload module
>> >> >> >> button
>> >> >> >> in the control pannel.
>> >> >> >> However, I think your problem is that you haven't implemented the
>> >> >> >> needed stuff in opensips.cfg script.
>> >> >> >> CP only provides an interface to managing/accessing the databases
>> >> >> >> tables. You still have to impliment the logic in opensips.cfg.
>> >> >> >>
>> >> >> >> Dave
>> >> >> >>
>> >> >> >> On Sat, Mar 19, 2011 at 3:04 AM, Duong Manh Truong
>> >> >> >> <ngoahotanglongbk at gmail.com> wrote:
>> >> >> >>> Hi all,
>> >> >> >>> I have followed all instructions about Opensips CP installations
>> >> >> >>> After done all configurations, the Web interface is appeared
>> >> >> >>> but unfortunately, when i use modules in this interfaces, it
>> >> >> >>> seems
>> >> >> >>> there
>> >> >> >>> is
>> >> >> >>> no connection between Opensips CP and Opensips Server Core!
>> >> >> >>> Take add/manage users module as an example: I registered user
>> >> >> >>> 1001,
>> >> >> >>> then
>> >> >> >>> i
>> >> >> >>> selected this module to show online users
>> >> >> >>> => But the result was "no data found" :-(
>> >> >> >>> I've created opensips database, correctly insert parameters to
>> >> >> >>> opensips
>> >> >> >>> CP
>> >> >> >>> config files (including mysql user/pass to connect to opensips
>> >> >> >>> database)
>> >> >> >>> No error found !
>> >> >> >>> But i still can not use Opensips CP, someone help me to figure
>> >> >> >>> out
>> >> >> >>> why
>> >> >> >>> Opensips CP has no effect ??
>> >> >> >>> Do i misconfig ?(or forget to config) some important parameters
>> >> >> >>> to
>> >> >> >>> make
>> >> >> >>> Opensips CP connect properly to Opensips Server Core?
>> >> >> >>> (Something likes authentications........etc)
>> >> >> >>> Thanks a lot!
>> >> >> >>> _______________________________________________
>> >> >> >>> Users mailing list
>> >> >> >>>?Users at lists.opensips.org
>> >> >> >>>?http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >> >> >>>
>> >> >> >>>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> _______________________________________________
>> >> >> >> Users mailing list
>> >> >> >> Users at lists.opensips.org
>> >> >> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >> >> >>
>> >> >> >>
>> >> >> > _______________________________________________
>> >> >> > Users mailing list
>> >> >> > Users at lists.opensips.org
>> >> >> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>> >> >> >
>> >> >> >
>> >> >
>> >
>> >
>
>
More information about the Users
mailing list