[OpenSIPS-Users] Opensips Control Pannel does not take effect into Opensips Server

Thu Mar 24 08:17:56 CET 2011

Thank Dave!

When going to the "MI commands" tab, surprisingly i found that

"Cannot connect to OpenSIPS Server via Management Interface (127.0.0.1/8000)
Execute MI Command"

After i executed the "ps -A" command, i only got this
"*14:02:20*  |  *ps -A *  |  127.0.0.1:8000"

The same result for "opensipsctl online" command
 "*14:04:37*  |  * opensipsctl online *  |  127.0.0.1:8000"

And i think the problem is my CP does not connect to my Opensips server on
5060 port. I remember that i have not configured CP listening port before,
it is default :-(
(CP & Opensips server were installed in the same machine)
Checking these files "db.inc.php" ; local.inc.php; globals.php  in the CP
config directory "/var/www/opensips-cp/config"
I don't see anywhere to config CP listening port !

Please help me to figure out, thanks!

2011/3/24 Dave Singer <dave.singer at wideideas.com>

> Duong,
>
> Yea missed that. :-)
> To check basic CP connection to opensips, go to System, MI Commands.
> In box under Execute MI Command, put "ps" and click "execute". It
> should show a bunch of lines about the opensips processes that are
> running.
>
> As far as showing Online Users, it may be using presence module/table
> rather than active registrations to qualify a user as "online".
> Someone else will have to answer that or you can look at the CP source
> code for that answer.
>
> Dave
>
> On Wed, Mar 23, 2011 at 12:35 PM, Duong Manh Truong
> <ngoahotanglongbk at gmail.com> wrote:
> > Thank David,
> > But i found that in my opensips.cfg file:
> > "
> > # ----- usrloc params -----
> > # modparam("usrloc", "db_mode",   0)
> > /* uncomment the following lines if you want to enable DB persistency
> >    for location entries */
> > modparam("usrloc", "db_mode",   2)
> > modparam("usrloc", "db_url",
> > "mysql://opensips:opensipsrw@localhost/opensips")
> > "
> > So i think that my "db_mode" is not the cause of my failed CP
> > " 2 - Write-Back scheme. This is a combination of previous two schemes.
> All
> > changes are made to memory and database synchronization is done in the
> > timer. The timer deletes all expired contacts and flushes all modified or
> > new contacts to database. Use this scheme if you encounter high-load
> peaks
> > and want them to process as fast as possible. The mode will not help at
> all
> > if the load is high all the time. Also, latency of this mode is much
> lower
> > than latency of mode 1, but slightly higher than latency of mode 0."
> > My CP still does  not work :-( , even the simple function like "show
> online
> > user"  --- "no data found"
> > (While checking by using opensipsctl is ok)
> >  opensipsctl online
> > database engine 'MYSQL' loaded
> > Control engine 'FIFO' loaded
> > 1001
> >
> > Please tell me how to check my CP and its connection to Opensips server?
> > Thanks !
> >
> >
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 22 Mar 2011 21:06:21 -0700
> > From: Dave Singer <dave.singer at wideideas.com>
> > Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
> >        effect into Opensips Server
> > To: OpenSIPS users mailling list <users at lists.opensips.org>
> > Message-ID:
> >        <AANLkTimB=bQZ1buVKaWzMKq2LM=UsLhEsAQWW+uFrrw7 at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > The key I think is usrloc db mode is 0, which means db is not used.
> > http://www.opensips.org/html/docs/modules/1.6.x/usrloc.html#id292029
> >
> > On Tue, Mar 22, 2011 at 6:47 PM, Duong Manh Truong
> > <ngoahotanglongbk at gmail.com> wrote:
> >> Dear Dave!
> >> Thanks for your help.
> >> I've checked the opensips.cfg again but i still can not find out what
> >> stuff
> >> is incorrect ! :-(
> >> I attached my config file in this email, hope that will help my problem
> to
> >> be?clearer!
> >> If anyone has had the same issue, please tell me how can i check or fix
> >> it.
> >> (Hope to receive relatively specific informations)
> >> Thanks and Best Regards.
> >>
> >>
> >>
> >> Date: Mon, 21 Mar 2011 08:45:03 -0700
> >> From: Dave Singer <dave.singer at wideideas.com>
> >> Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
> >> ? ? ? ?effect into Opensips Server
> >> To: OpenSIPS users mailling list <users at lists.opensips.org>
> >> Message-ID:
> >> ? ? ? ?<AANLkTinGLDzzbUgJgQXOd_93r31hjnHAVAzPMo64K-MQ at mail.gmail.com>
> >> Content-Type: text/plain; charset=ISO-8859-1
> >>
> >> Duong,
> >>
> >> Some modules, like drouting, you have to click a reload module button
> >> in the control pannel.
> >> However, I think your problem is that you haven't implemented the
> >> needed stuff in opensips.cfg script.
> >> CP only provides an interface to managing/accessing the databases
> >> tables. You still have to impliment the logic in opensips.cfg.
> >>
> >> Dave
> >>
> >> On Sat, Mar 19, 2011 at 3:04 AM, Duong Manh Truong
> >> <ngoahotanglongbk at gmail.com> wrote:
> >>> Hi all,
> >>> I have followed all instructions about Opensips CP installations
> >>> After done all configurations, the Web interface is appeared
> >>> but unfortunately, when i use modules in this interfaces, it seems
> there
> >>> is
> >>> no connection between Opensips CP and Opensips Server Core!
> >>> Take add/manage users module as an example: I registered user 1001,
> then
> >>> i
> >>> selected this module to show online users
> >>> => But the result was "no data found" :-(
> >>> I've created opensips database, correctly insert parameters to opensips
> >>> CP
> >>> config files (including mysql user/pass to connect to opensips
> database)
> >>> No error found !
> >>> But i still can not use Opensips CP, someone help me to figure out why
> >>> Opensips CP has no effect ??
> >>> Do i misconfig ?(or forget to config) some important parameters to make
> >>> Opensips CP connect properly to Opensips Server Core?
> >>> (Something likes authentications........etc)
> >>> Thanks a lot!
> >>> _______________________________________________
> >>> Users mailing list
> >>>?Users at lists.opensips.org
> >>>?http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>>
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users at lists.opensips.org
> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >>
> >>
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110324/a7c1f8d4/attachment.htm>