[OpenSIPS-Users] Opensips Control Pannel does not take effect into Opensips Server

[Duong Manh Truong]

Thank David,
But i found that in my opensips.cfg file:
"
*# ----- usrloc params -----
*
*# modparam("usrloc", "db_mode",   0)*
*/* uncomment the following lines if you want to enable DB persistency*
*   for location entries */*
*modparam("usrloc", "db_mode",   2)*
*modparam("usrloc", "db_url",*
* "mysql://opensips:opensipsrw@localhost/opensips")*
"
So i think that my "db_mode" is not the cause of my failed CP
" *2 - Write-Back scheme. This is a combination of previous two schemes. All
changes are made to memory and database synchronization is done in the
timer. The timer deletes all expired contacts and flushes all modified or
new contacts to database. Use this scheme if you encounter high-load peaks
and want them to process as fast as possible. The mode will not help at all
if the load is high all the time. Also, latency of this mode is much lower
than latency of mode 1, but slightly higher than latency of mode *0."

My CP still does  not work :-( , even the simple function like "show online
user"  --- "no data found"
(While checking by using opensipsctl is ok)
 *opensipsctl online*
*database engine 'MYSQL' loaded*
*Control engine 'FIFO' loaded*
*1001*


Please tell me how to check my CP and its connection to Opensips server?

Thanks !





----------------------------------------------------------------------

Message: 1
Date: Tue, 22 Mar 2011 21:06:21 -0700
From: Dave Singer <dave.singer at wideideas.com>
Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
       effect into Opensips Server
To: OpenSIPS users mailling list <users at lists.opensips.org>
Message-ID:
       <AANLkTimB=bQZ1buVKaWzMKq2LM=UsLhEsAQWW+uFrrw7 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

The key I think is usrloc db mode is 0, which means db is not used.
http://www.opensips.org/html/docs/modules/1.6.x/usrloc.html#id292029

On Tue, Mar 22, 2011 at 6:47 PM, Duong Manh Truong
<ngoahotanglongbk at gmail.com> wrote:
> Dear Dave!
> Thanks for your help.
> I've checked the opensips.cfg again but i still can not find out what
stuff
> is incorrect ! :-(
> I attached my config file in this email, hope that will help my problem to
> be?clearer!
> If anyone has had the same issue, please tell me how can i check or fix
it.
> (Hope to receive relatively specific informations)
> Thanks and Best Regards.
>
>
>
> Date: Mon, 21 Mar 2011 08:45:03 -0700
> From: Dave Singer <dave.singer at wideideas.com>
> Subject: Re: [OpenSIPS-Users] Opensips Control Pannel does not take
> ? ? ? ?effect into Opensips Server
> To: OpenSIPS users mailling list <users at lists.opensips.org>
> Message-ID:
> ? ? ? ?<AANLkTinGLDzzbUgJgQXOd_93r31hjnHAVAzPMo64K-MQ at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Duong,
>
> Some modules, like drouting, you have to click a reload module button
> in the control pannel.
> However, I think your problem is that you haven't implemented the
> needed stuff in opensips.cfg script.
> CP only provides an interface to managing/accessing the databases
> tables. You still have to impliment the logic in opensips.cfg.
>
> Dave
>
> On Sat, Mar 19, 2011 at 3:04 AM, Duong Manh Truong
> <ngoahotanglongbk at gmail.com> wrote:
>> Hi all,
>> I have followed all instructions about Opensips CP installations
>> After done all configurations, the Web interface is appeared
>> but unfortunately, when i use modules in this interfaces, it seems there
>> is
>> no connection between Opensips CP and Opensips Server Core!
>> Take add/manage users module as an example: I registered user 1001, then
i
>> selected this module to show online users
>> => But the result was "no data found" :-(
>> I've created opensips database, correctly insert parameters to opensips
CP
>> config files (including mysql user/pass to connect to opensips database)
>> No error found !
>> But i still can not use Opensips CP, someone help me to figure out why
>> Opensips CP has no effect ??
>> Do i misconfig ?(or forget to config) some important parameters to make
>> Opensips CP connect properly to Opensips Server Core?
>> (Something likes authentications........etc)
>> Thanks a lot!
>> _______________________________________________
>> Users mailing list
>>?Users at lists.opensips.org
>>?http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110324/c66feab3/attachment.htm>