[OpenSIPS-Users] Route group inside of drouting

[Kent Pirlo]

Thank you so much! I understand now.



On Fri, Jun 24, 2011 at 9:33 AM, Bogdan-Andrei Iancu <bogdan at opensips.org>wrote:

> **
> Hi Kent,
>
> The DR module operates with GW/destinations, not directly with carries (how
> you define, understand and use the term of carrier is your own business).
>
> so, if you have the case you described (A with 7 Gw[1,2,3,4,5,6,7], B with
> one [8] and C with one [9]) and you want for A to have all GWs tried before
> moving to B, you can define all GW (from A, B ,C) do:
>
> sort_order=0 (none) and gw_list=1,2,3,4,5,6,7,8,9   (try all GWs in the
> same order)
>
> sort_order=1 (radomize) and gw_list=1,2,3,4,5,6,7;8;9  (GWs from the first
> set - for A - will be try all the time in different order).
>
> Regards,
> Bogdan
>
>
>
> On 06/24/2011 04:23 PM, Kent Pirlo wrote:
>
> My understanding of the "sort_order" parameter is that it will apply to
> sort to the entire group_id.
>
> So if my LCR should be CarrierA, CarrierB, CarrierC... and i create
> gateway_ids (3 thru 9 for CarrierA), 10 for CarrierB, and  1 for CarrierC..
>
> I can have gw_list as :    3;9,10,1   but it will always try 3 then 4 then
> 5, then 6..
>
> If i apply a sort_order... it will apply to all gw's in the list, not just
> 3 thru 9, right?
>
> The over all order needs to say the same, as they are ordered by cost.. but
> 3 thru 9 are the same Carrier and need to be round-robin or load-balanced..
>
> Does that make sense?
>
>
>
>
> On Mon, Jun 13, 2011 at 9:42 AM, Andrew Pogrebennyk <
> andrew.pogrebennyk at portaone.com> wrote:
>
>> On 13.06.2011 16:40, Kent Pirlo wrote:
>>
>>> 212555, gwlist = 3,5,1
>>>
>>> now.. lets say gw "3" actually needs to try multiple ips for that carrier
>>> before going on to gw "5", is this possible while using drouting or do i
>>> need to scrap the drouting module to do something complex like this..
>>>
>>
>>  It is possible and described in the module documentation:
>>
>> Also the module allows the usage of groups in the destination lists. A
>> group of destinations is delimited by semi-colon char. inside the whole
>> destination list ( like: 2,4;5,78,23;4;7;2 ). The destinations from within a
>> group may be act differently (like load-balancing, random selection, etc),
>> depending of the “sort_order” parameter - more about this is available under
>> the “do_routing()” function section.
>>
>> http://www.opensips.org/html/docs/modules/1.6.x/drouting.html#id294582
>>
>> --
>> Sincerely,
>> Andrew Pogrebennyk
>>
>>
>>
> --
> Bogdan-Andrei Iancu
>
> OpenSIPS solutions and "know-how"
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110624/52f89e9e/attachment.htm>