[OpenSIPS-Users] CDRTool - CDR Flow record

[Duane Larson]

Thanks for the reply Tijmen.  I was working on this last night and I think I
made some leadway.  My issue was that OpenSIPS wasn't sending CDRTool the
correct info depending on the call.  So my global.inc still has

"E164_class"         => "E164_US",
"intAccessCode"      => "011",
"natAccessCode"      => "1",

The issue I was seeing was that if I fixed the Call Flows it would break the
rate calculations because it didn't know the Country Codes.  And if I fixed
the rating for Country Codes it would break the flow.  This is what I had to
do from a USA Provider standpoint in order to get Call Flow and Call Rating
working

If the call is from a local customer to another local customer OpenSIPS
needs to pass the can_uri without a "1" prefixed to the callee.  This will
show up as "on-net"

If the call is from a local customer to a caller on the PSTN network
anywhere in the nation OpenSIPS needs to pass the can_uri with a "1"
prefixed to the callee.  This will show up as "on-net-diverted-off-net".

If the call is from a local customer to an International number OpenSIPS
needs to pass the can_uri with a "011" prefixed to the callee.  This will
show up as "outgoing".

If someone from the PSTN calls a local customer then OpenSIPS needs to pass
the can_uri without a "1" prefixed to the callee.  This will show up as
"diverted-on-net".


So I think my problem was that I was trying to keep the same format for all
types of calls.  Obviously each version of call needs a different format and
I understand that now.  It really took a lot of test calls to figure that
out.



On Tue, Jun 7, 2011 at 8:37 AM, Tijmen de Mes <tijmen at ag-projects.com>wrote:

> Hi,
>
> The flow is determined by the aNumber and  BillingParty. The logic is the
> following:
>
> If the caller is local and aNumber is the same as the BillingPartyID the
> flow will be
> on-net or outgoing depending on the callee
>
> If the caller is local and aNumber is not the same as the BillingPartyID
> the flow will be
> on-net-diverted-on-net or on-net-diverted-off-net depending on the callee
>
> If the caller is not local and the BillingParty is local the flow will be
> diverted-on-net or diverted-off-net depending on the callee
>
> If the caller is not local and the callee is local the flow will be
> incoming
>
> If the caller is not local and the callee is not local is local the flow
> will be
> transit
>
> After the call is done ( not in progress any more) it will be normalized by
> the normalization process. This will rewrite the numbers based on the config
> settings.
>
> Hope this clarifies things a bit.
>
> Best regards,
>
> --
> Tijmen de Mes
> AG Projects
>
> Op 6/2/11 10:23 PM, Duane Larson schreef:
>
>   I think I don't have something configured correctly.  When I do a search
> on the CDRs page my Flow info is not always correct.  So I am not sure what
> all I am doing wrong.
>
> On my cdrtool global.inc config I have the following configured
>                     "intAccessCode"      => "011",
>                     "natAccessCode"      => "1",
>
>
> When an internal customer to internal customer call is "in progress" the
> call shows up as On-Net, yet when the call is over it shows up as
> "outgoing".  For the following fields I am sending this from OpenSIPS
>
> To (dialed URI): 19**33*9**8 at irock.com
> Canonical URI: 19**33*9**8 at irock.com
> Billing Party: 19**27*2**4 at coolbeans.com
> From:
> 19**27*2**4 at coolbeans.com
>
> You can see that I am prefixing the "1" to the US numbers.
>
> After the call is not "in progress" I see that the following changed
>
>    To (dialed URI): 01119**33*9**8 at irock.com
>
> Canonical URI: 01119**33*9**8 at irock.com
>
>
>
> I also get a flow of "diverted-off-net" when a call comes from the PSTN to
> an internal customer and once again my "To (dialed URI)" and "Canonical URI"
> numbers change from having a "1" prefix to a "0111" when the call is over.
>
> I'm sure this is something simple.
>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>


-- 
--
*--*--*--*--*--*
Duane
*--*--*--*--*--*
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110607/2815a9dc/attachment.htm>