[OpenSIPS-Users] QoS/ToS Opensips
Peter den Hartog
peterdenhartog at gmail.com
Mon Feb 28 17:00:02 CET 2011
Jeff,
Thanks for your response.
It's for our wifi network and i know for a fact they expect 5 & 6, i checked
that to be sure. I'll take a look at your links.
Thank you!
Peter
On Mon, Feb 28, 2011 at 4:53 PM, Jeff Pyle <jpyle at fidelityvoice.com> wrote:
> Peter,
>
> Additionally, and slightly off list topic… If there's a standard, I would
> suspect it's AF31 for SIP (0x68) and EF for RTP (0xb8). I've seen several
> gateway manufacturers' equipment use these values by default. CS6 and CS7
> are generally reserved for network operations only. I haven't done any
> research to see if there is anything official to this.
>
>
> - Jeff
>
>
> From: Jeff Pyle <jpyle at fidelityvoice.com>
>
> Reply-To: OpenSIPS users mailling list <users at lists.opensips.org>
> Date: Mon, 28 Feb 2011 10:50:03 -0500
>
> To: OpenSIPS users mailling list <users at lists.opensips.org>
> Subject: Re: [OpenSIPS-Users] QoS/ToS Opensips
>
> Peter,
>
> See the "tos" option to set SIP ToS values:
> http://www.opensips.org/Resources/DocsCoreFcn16#toc89
>
> A CS5 value would be tos=0xa0 I believe. EF may be a more compatible value
> (0xb8), and it will also be detected as CS5. Here's a great QoS cheatsheet:
> http://packetlife.net/media/library/19/QoS.pdf
>
> Opensips does not handle RTP, so there is no relevant setting.
>
>
> - Jeff
>
>
> From: Peter den Hartog <peterdenhartog at gmail.com>
> Reply-To: OpenSIPS users mailling list <users at lists.opensips.org>
> Date: Mon, 28 Feb 2011 10:42:38 -0500
> To: OpenSIPS users mailling list <users at lists.opensips.org>
> Subject: [OpenSIPS-Users] QoS/ToS Opensips
>
> Is there a way to set these values for Opensips?
> I would like to use CS5 for signaling and CS6 for RTP/Voice.
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20110228/d034dbd8/attachment.htm>
More information about the Users
mailing list