[OpenSIPS-Users] mediaproxy KBIn and KBOut

[Dani Popa]

Hi,

As you can see, callee_bytes and caller_bytes are 0 during the call. 
Media relay version is "media-relay 2.4.4". network hardware is Ethernet 
controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet 
(rev 20). The same issue i have with media-relay 2.4.3 on the same 
machine. I wondering if is a network card driver issue or kernel 
issue(if so, i'm dont know how to make troubleshooting, where should i 
see the callee_bytes and caller_bytes in kernel stats).



Dani

On 04/18/11 10:43, Saúl Ibarra Corretgé wrote:
> On 04/15/2011 02:42 PM, Dani Popa wrote:
>> Hi,
>>
>> Mediaproxy radius request does not populate Kbin and Kbout. Also i tried
>> to see sessions on port 25061 and also there callee_bytes and
>> caller_bytes are 0.
>>
>> opensips:~# telnet localhost 25061
>> Trying 127.0.0.1...
>> Connected to localhost.
>> Escape character is '^]'.
>> sessions
>> []
>> sessions
>> [{"from_tag": "2a476a89", "start_time": 1302867244.13, "call_id":
>> "f2c9ca5f8ffe0e5ea422b57d7b93aa28 at 0:0:0:0:0:0:0:0", "duration": 5,
>> "streams": [{"status": "active", "caller_codec": "G711u",
>> "post_dial_delay": 3.43099498749, "callee_codec": "G711u",
>> "caller_bytes": 0, "start_time": 0, "callee_packets": 0, "callee_bytes":
>> 0, "caller_packets": 0, "callee_remote": "192.5.32.12:8152", "end_time":
>> 5, "caller_remote": "189.8.7.161:5105", "media_type": "audio",
>> "callee_local": "167.14.19.35:50010", "timeout_wait": 0, "caller_local":
>> "167.14.19.35:50008"}], "to_tag":
>> "a94c095b773be1dd6e8d668a785a9c8498c8c4db", "to_uri":
>> "called at domain.org", "caller_ua":
>> "Jitsi1.0-beta1-nightly.build.3408Linux", "callee_ua": "Cisco",
>> "from_uri": "caller at domain.org"}]
>>
>>
>> [{"from_tag": "2a476a89", "start_time": 1302867244.13, "call_id":
>> "f2c9ca5f8ffe0e5ea422b57d7b93aa28 at 0:0:0:0:0:0:0:0", "duration": 11,
>> "streams": [{"status": "active", "caller_codec": "G711u",
>> "post_dial_delay": 3.43099498749, "callee_codec": "G711u",
>> "caller_bytes": 0, "start_time": 0, "callee_packets": 0, "callee_bytes":
>> 0, "caller_packets": 0, "callee_remote": "192.5.32.12:8152", "end_time":
>> 11, "caller_remote": "189.8.7.161:5105", "media_type": "audio",
>> "callee_local": "167.14.19.35:50010", "timeout_wait": 0, "caller_local":
>> "167.14.19.35:50008"}], "to_tag":
>> "a94c095b773be1dd6e8d668a785a9c8498c8c4db", "to_uri":
>> "called at domain.org", "caller_ua":
>> "Jitsi1.0-beta1-nightly.build.3408Linux", "callee_ua": "Cisco",
>> "from_uri": "caller at domain.org"}]
>>
>>
>>
>> Can someone give me a hint ?
>>
>> Thanks,
>> Dani
>>
>
> Hi Dani,
>
> What versions of the software are you using? KBIn and KBOut were 
> renamed quite some time ago. CDRTool will render Acct-Input-Octets and 
> Acct-Output-Octets fields, which are populated by MediaProxy using the 
> caller_bytes and callee_bytes attributes which you can see on the 
> statistics.
>
> I just ran a quick test and it works here. Do the calls on the trace 
> you pasted have audio at all?
>
>
> Regards,
>