[OpenSIPS-Users] Opensips-CP Monit is not working

[Albert Paijmans]

Thanks,

So I thought lets start over, and when I use a standard script port 8000 and
2812 show up.
This is with a default script, but the monit page still gives an error 404
page not found.
Going to Siptrace page gets: Array ( [0] => ERROR: Requested command
(sip_trace) is not available!)
With the command netstat -tlnp both 2812 and 8000 show.
But when for instance I try to load dialplan & drouting both 8000 and 2812
disappear?

I suppose there are some things I am missing?
My goal is a low memory proxy and registrar with loadbalancer, dialplan,
drouting, and domain modules where everything is read & stored from
database.
The default script hasn't been tweeked yet for dialplan drouting or domain
but I suppose tI should take one step at a time.

Albert


On Tue, May 25, 2010 at 3:31 PM, Alex Ionescu <alex at opensips.org> wrote:

>  Hi Albert,
>
> Please, try this command : netstat -tlnp . See if opensips is listening
> also on port 8000 (this should be the xmlrpc port - if this is what you've
> set up in your opensips config)
> and also see if monit is configured to listen on 127.0.0.1:2812. If this
> info is not shown in the output of the command then in means something is
> not working correctly.
>
> Also see monit's config file : monitrc. See if it is set up to listen on
> the same IP:PORT that you have set up in the OpensipsCP config
> (boxes.global.inc.php)
>
> Regards,
> Alex
>
> On 5/25/2010 15:31, Albert Paijmans wrote:
>
> Hi,
>
>  I have some problems connecting to monit and mi
> Installed xmlrpc (deb packages) and running monit -t gives an ok
> Starting OpenSIPS gives an ok to.
>
>  But in the control panel I get these error messages:
> Cannot connect to OpenSIPS Server via Management Interface (127.0.0.1/8000
> )
> And cannot connect tot 127.0.0.1:2812  (monit tool)
>
>  OpenSIPS seems to run and listening on udp ports for sip messages.
> So I am missing something? Did the install for monit from the readme.
>
>  Thanks,
>
> Albert
>
>
> On Tue, May 25, 2010 at 10:43 AM, Aman <goforaman at gmail.com> wrote:
>
>>
>>  Greetings,
>>
>>            Need a help, i am getting the error on monit on OpenSIPS-CP
>> that "I can't connect!", when i run
>> monit -t for syntax check, its shows error,
>>
>>  May 24 10:17:26 opensips monit: /etc/monit/monitrc:241: Warning: include
>> files not found '/etc/monit/conf.d/*'
>> May 24 10:50:49 opensips monit: /etc/monit/monitrc:241: Warning: include
>> files not found '/etc/monit/conf.d/*'
>> May 24 11:08:14 opensips monit: /etc/monit/monitrc:241: Warning: include
>> files not found '/etc/monit/conf.d/*'
>>
>>  But this file does not exist on defined path, i have also skipped the
>> following configuration part in 'monitrc'
>>
>>  " check process opensips with pidfile /var/run/opensips.pid
>> #Below is actions taken by monit when service got stuck.
>> start program = "/etc/init.d/opensips start"
>> stop program = "/etc/init.d/opensips stop"
>> # Admin will notify by mail if below of the condition satisfied.
>> if cpu is greater than 70% for 2 cycles then alert
>> if cpu > 90% for 5 cycles then restart "
>>
>>  as this shows error opensips already icluded, please advice to make the
>> monit work.
>> Any suggestions are really appreciable.
>>
>>
>>
>> --
>> Amanpreet Singh
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Users mailing listUsers at lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> --
> Alex Ionescuwww.voice-system.ro
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20100526/ad225374/attachment-0001.htm