[OpenSIPS-Users] RES: ERROR: Error opening OpenSIPS's FIFO /tmp/opensips_fifo

Flavio E. Goncalves flavio at voffice.com.br
Mon Mar 1 20:46:44 CET 2010


Add the following parameter

modparam("mi_fifo", "fifo_mode",0666)

Just in case, check your opensipsctlrc file. This file controls where
opensipsctl finds the FIFO.

Flavio E. Goncalves

-----Mensagem original-----
De: users-bounces at lists.opensips.org
[mailto:users-bounces at lists.opensips.org] Em nome de Alejandro Recarey
Enviada em: Monday, March 01, 2010 4:43 PM
Para: users at lists.opensips.org
Assunto: [OpenSIPS-Users] ERROR: Error opening OpenSIPS's FIFO
/tmp/opensips_fifo

Hello everybody,

I have just made a fresh install of OpenSIPS 1.6.1 using the
http://debian.leurent.eu/ mirror.

I am using debian lenny 5.0. I have read all of the tutorials and I
believe I have a working configuration. OpenSIPS is running and my cfg
file is loaded without problems.

However, whenever y try to run the command opensipsctl ul show, or
opensipsctl monitor I get the following error ERROR: Error opening
OpenSIPS's FIFO /tmp/opensips_fifo

Yes, I have the line modparam("mi_fifo", "fifo_name",
"/tmp/opensips_fifo") uncommented and the mi_fifo module is also
uncommented. The file /usr/lib/opensips/modules/mi_fifo.so exists.

What am I doing wrong??

I am attaching my opensips.cfg file contents.

Regards,

Alex



#
# $Id: opensips.cfg 6046 2009-08-30 17:13:08Z bogdan_iancu $
#
# OpenSIPS basic configuration script
#     by Anca Vamanu <anca at voice-system.ro>
#
# Please refer to the Core CookBook at:
#      http://www.opensips.org/index.php?n=Resources.DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#


####### Global Parameters #########

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
   not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
   lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/etc/opensips/tls/user/user-calist.pem"


port=5060

/* uncomment and configure the following line if you want opensips to
   bind on a specific interface/port/proto (default bind on all available)
*/
#listen=udp:192.168.1.2:5060


####### Modules Section ########

#set module path
mpath="/usr/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"
/* uncomment next lines for MySQL based authentication support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "presence.so"
#loadmodule "presence_xml.so"


# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")

# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)


# ----- usrloc params -----
#modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")


# ----- uri params -----
modparam("uri", "use_uri_table", 0)


# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)


# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips")
modparam("auth_db", "load_credentials", "")


# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
#modparam("alias_db", "db_url",
#       "mysql://opensips:opensipsrw@localhost/opensips")


# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
#modparam("domain", "db_url",
#       "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1)   # Use caching


# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)


# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#modparam("presence|presence_xml", "db_url",
#       "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("presence_xml", "force_active", 1)
#modparam("presence", "server_address", "sip:192.168.1.2:5060")


####### Routing Logic ########


# main request routing logic

route{

        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        }

        if (has_totag()) {
                # sequential request withing a dialog should
                # take the path determined by record-routing
                if (loose_route()) {
                        if (is_method("BYE")) {
                                setflag(1); # do accounting ...
                                setflag(3); # ... even if the transaction
fails
                        } else if (is_method("INVITE")) {
                                # even if in most of the cases is
useless, do RR for
                                # re-INVITEs alos, as some buggy
clients do change route set
                                # during the dialog.
                                record_route();
                        }
                        # route it out to whatever destination was set
by loose_route()
                        # in $du (destination URI).
                        route(1);
                } else {
                        /* uncomment the following lines if you want
to enable presence */
                        ##if (is_method("SUBSCRIBE") && $rd ==
"your.server.ip.address") {
                        ##      # in-dialog subscribe requests
                        ##      route(2);
                        ##      exit;
                        ##}
                        if ( is_method("ACK") ) {
                                if ( t_check_trans() ) {
                                        # non loose-route, but
stateful ACK; must be an ACK after
                                        # a 487 or e.g. 404 from upstream
server
                                        t_relay();
                                        exit;
                                } else {
                                        # ACK without matching transaction
->
                                        # ignore and discard
                                        exit;
                                }
                        }
                        sl_send_reply("404","Not here");
                }
                exit;
        }

        #initial requests

        # CANCEL processing
        if (is_method("CANCEL"))
        {
                if (t_check_trans())
                        t_relay();
                exit;
        }

        t_check_trans();

        # authenticate if from local subscriber (uncomment to enable auth)
        # authenticate all initial non-REGISTER request that pretend to be
        # generated by local subscriber (domain from FROM URI is local)
        ##if (!(method=="REGISTER") && is_from_local())  /*multidomain
version*/
        if (!(method=="REGISTER") && from_uri==myself) /*no
multidomain version*/
        {
                if (!proxy_authorize("", "subscriber")) {
                        proxy_challenge("", "0");
                        exit;
                }
                if (!check_from()) {
                        sl_send_reply("403","Forbidden auth ID");
                        exit;
                }

                consume_credentials();
                # caller authenticated
        }

        # preloaded route checking
        if (loose_route()) {
                xlog("L_ERR",
                "Attempt to route with preloaded Route's
[$fu/$tu/$ru/$ci]");
                if (!is_method("ACK"))
                        sl_send_reply("403","Preload Route denied");
                exit;
        }

        # record routing
        if (!is_method("REGISTER|MESSAGE"))
                record_route();

        # account only INVITEs
        if (is_method("INVITE")) {
                setflag(1); # do accounting
        }
        if (!uri==myself)
        ## replace with following line if multi-domain support is used
        ##if (!is_uri_host_local())
        {
                append_hf("P-hint: outbound\r\n");
                # if you have some interdomain connections via TLS
                ##if($rd=="tls_domain1.net") {
                ##      t_relay("tls:domain1.net");
                ##      exit;
                ##} else if($rd=="tls_domain2.net") {
                ##      t_relay("tls:domain2.net");
                ##      exit;
                ##}
                route(1);
        }

        # requests for my domain

        ## uncomment this if you want to enable presence server
        ##   and comment the next 'if' block
        ##   NOTE: uncomment also the definition of route[2] from  below
        ##if( is_method("PUBLISH|SUBSCRIBE"))
        ##              route(2);

        if (is_method("PUBLISH"))
        {
                sl_send_reply("503", "Service Unavailable");
                exit;
        }


        if (is_method("REGISTER"))
        {
                # authenticate the REGISTER requests (uncomment to enable
auth)
                if (!www_authorize("", "subscriber"))
                {
                        www_challenge("", "0");
                        exit;
                }

                if (!check_to())
                {
                        sl_send_reply("403","Forbidden auth ID");
                        exit;
                }

                if (!save("location"))
                        sl_reply_error();

                exit;
        }

        if ($rU==NULL) {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }

        # apply DB based aliases (uncomment to enable)
        ##alias_db_lookup("dbaliases");

        # do lookup with method filtering
        if (!lookup("location","m")) {
                switch ($retcode) {
                        case -1:
                        case -3:
                                t_newtran();
                                t_reply("404", "Not Found");
                                exit;
                        case -2:
                                sl_send_reply("405", "Method Not Allowed");
                                exit;
                }
        }

        # when routing via usrloc, log the missed calls also
        setflag(2);

        route(1);
}


route[1] {
        # for INVITEs enable some additional helper routes
        if (is_method("INVITE")) {
                t_on_branch("2");
                t_on_reply("2");
                t_on_failure("1");
        }

        if (!t_relay()) {
                sl_reply_error();
        };
        exit;
}


# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
##route[2]
##{
##      if (!t_newtran())
##      {
##              sl_reply_error();
##              exit;
##      };
##
##      if(is_method("PUBLISH"))
##      {
##              handle_publish();
##              t_release();
##      }
##      else
##      if( is_method("SUBSCRIBE"))
##      {
##              handle_subscribe();
##              t_release();
##      }
##
##      exit;
##}


branch_route[2] {
        xlog("new branch at $ru\n");
}


onreply_route[2] {
        xlog("incoming reply\n");
}


failure_route[1] {
        if (t_was_cancelled()) {
                exit;
        }

        # uncomment the following lines if you want to block client
        # redirect based on 3xx replies.
        ##if (t_check_status("3[0-9][0-9]")) {
        ##t_reply("404","Not found");
        ##      exit;
        ##}

        # uncomment the following lines if you want to redirect the failed
        # calls to a different new destination
        ##if (t_check_status("486|408")) {
        ##      sethostport("192.168.2.100:5060");
        ##      # do not set the missed call flag again
        ##      t_relay();
        ##}
}

_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




More information about the Users mailing list