[OpenSIPS-Users] ERROR: Error opening OpenSIPS's FIFO /tmp/opensips_fifo
Brian Chamberlain
brian at asterisk.ie
Tue Mar 2 09:20:20 CET 2010
Hi Alex,
What user are you running openSips as ? Sounds like permissions problem.
Regards,
Brian
On 1 Mar 2010, at 19:42, Alejandro Recarey wrote:
> Hello everybody,
>
> I have just made a fresh install of OpenSIPS 1.6.1 using the
> http://debian.leurent.eu/ mirror.
>
> I am using debian lenny 5.0. I have read all of the tutorials and I
> believe I have a working configuration. OpenSIPS is running and my cfg
> file is loaded without problems.
>
> However, whenever y try to run the command opensipsctl ul show, or
> opensipsctl monitor I get the following error ERROR: Error opening
> OpenSIPS's FIFO /tmp/opensips_fifo
>
> Yes, I have the line modparam("mi_fifo", "fifo_name",
> "/tmp/opensips_fifo") uncommented and the mi_fifo module is also
> uncommented. The file /usr/lib/opensips/modules/mi_fifo.so exists.
>
> What am I doing wrong??
>
> I am attaching my opensips.cfg file contents.
>
> Regards,
>
> Alex
>
>
>
> #
> # $Id: opensips.cfg 6046 2009-08-30 17:13:08Z bogdan_iancu $
> #
> # OpenSIPS basic configuration script
> # by Anca Vamanu <anca at voice-system.ro>
> #
> # Please refer to the Core CookBook at:
> # http://www.opensips.org/index.php?n=Resources.DocsCookbooks
> # for a explanation of possible statements, functions and parameters.
> #
>
>
> ####### Global Parameters #########
>
> debug=3
> log_stderror=no
> log_facility=LOG_LOCAL0
>
> fork=yes
> children=4
>
> /* uncomment the following lines to enable debugging */
> #debug=6
> #fork=no
> #log_stderror=yes
>
> /* uncomment the next line to disable TCP (default on) */
> #disable_tcp=yes
>
> /* uncomment the next line to enable the auto temporary blacklisting of
> not available destinations (default disabled) */
> #disable_dns_blacklist=no
>
> /* uncomment the next line to enable IPv6 lookup after IPv4 dns
> lookup failures (default disabled) */
> #dns_try_ipv6=yes
>
> /* uncomment the next line to disable the auto discovery of local aliases
> based on revers DNS on IPs (default on) */
> #auto_aliases=no
>
> /* uncomment the following lines to enable TLS support (default off) */
> #disable_tls = no
> #listen = tls:your_IP:5061
> #tls_verify_server = 1
> #tls_verify_client = 1
> #tls_require_client_certificate = 0
> #tls_method = TLSv1
> #tls_certificate = "/etc/opensips/tls/user/user-cert.pem"
> #tls_private_key = "/etc/opensips/tls/user/user-privkey.pem"
> #tls_ca_list = "/etc/opensips/tls/user/user-calist.pem"
>
>
> port=5060
>
> /* uncomment and configure the following line if you want opensips to
> bind on a specific interface/port/proto (default bind on all available) */
> #listen=udp:192.168.1.2:5060
>
>
> ####### Modules Section ########
>
> #set module path
> mpath="/usr/lib/opensips/modules/"
>
> /* uncomment next line for MySQL DB support */
> loadmodule "db_mysql.so"
> loadmodule "signaling.so"
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "mi_fifo.so"
> loadmodule "uri.so"
> loadmodule "xlog.so"
> loadmodule "acc.so"
> /* uncomment next lines for MySQL based authentication support
> NOTE: a DB (like db_mysql) module must be also loaded */
> loadmodule "auth.so"
> loadmodule "auth_db.so"
> /* uncomment next line for aliases support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #loadmodule "alias_db.so"
> /* uncomment next line for multi-domain support
> NOTE: a DB (like db_mysql) module must be also loaded
> NOTE: be sure and enable multi-domain support in all used modules
> (see "multi-module params" section ) */
> #loadmodule "domain.so"
> /* uncomment the next two lines for presence server support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #loadmodule "presence.so"
> #loadmodule "presence_xml.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
>
> # ----- mi_fifo params -----
> modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
>
> # ----- rr params -----
> # add value to ;lr param to cope with most of the UAs
> modparam("rr", "enable_full_lr", 1)
> # do not append from tag to the RR (no need for this script)
> modparam("rr", "append_fromtag", 0)
>
>
> # ----- registrar params -----
> /* uncomment the next line not to allow more than 10 contacts per AOR */
> #modparam("registrar", "max_contacts", 10)
>
>
> # ----- usrloc params -----
> #modparam("usrloc", "db_mode", 0)
> /* uncomment the following lines if you want to enable DB persistency
> for location entries */
> modparam("usrloc", "db_mode", 2)
> modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
>
>
> # ----- uri params -----
> modparam("uri", "use_uri_table", 0)
>
>
> # ----- acc params -----
> /* what sepcial events should be accounted ? */
> modparam("acc", "early_media", 1)
> modparam("acc", "report_ack", 1)
> modparam("acc", "report_cancels", 1)
> /* by default ww do not adjust the direct of the sequential requests.
> if you enable this parameter, be sure the enable "append_fromtag"
> in "rr" module */
> modparam("acc", "detect_direction", 0)
> /* account triggers (flags) */
> modparam("acc", "failed_transaction_flag", 3)
> modparam("acc", "log_flag", 1)
> modparam("acc", "log_missed_flag", 2)
> /* uncomment the following lines to enable DB accounting also */
> modparam("acc", "db_flag", 1)
> modparam("acc", "db_missed_flag", 2)
>
>
> # ----- auth_db params -----
> /* uncomment the following lines if you want to enable the DB based
> authentication */
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
> modparam("auth_db", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
> modparam("auth_db", "load_credentials", "")
>
>
> # ----- alias_db params -----
> /* uncomment the following lines if you want to enable the DB based
> aliases */
> #modparam("alias_db", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
>
>
> # ----- domain params -----
> /* uncomment the following lines to enable multi-domain detection
> support */
> #modparam("domain", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
> #modparam("domain", "db_mode", 1) # Use caching
>
>
> # ----- multi-module params -----
> /* uncomment the following line if you want to enable multi-domain support
> in the modules (dafault off) */
> #modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)
>
>
> # ----- presence params -----
> /* uncomment the following lines if you want to enable presence */
> #modparam("presence|presence_xml", "db_url",
> # "mysql://opensips:opensipsrw@localhost/opensips")
> #modparam("presence_xml", "force_active", 1)
> #modparam("presence", "server_address", "sip:192.168.1.2:5060")
>
>
> ####### Routing Logic ########
>
>
> # main request routing logic
>
> route{
>
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> }
>
> if (has_totag()) {
> # sequential request withing a dialog should
> # take the path determined by record-routing
> if (loose_route()) {
> if (is_method("BYE")) {
> setflag(1); # do accounting ...
> setflag(3); # ... even if the transaction fails
> } else if (is_method("INVITE")) {
> # even if in most of the cases is
> useless, do RR for
> # re-INVITEs alos, as some buggy
> clients do change route set
> # during the dialog.
> record_route();
> }
> # route it out to whatever destination was set
> by loose_route()
> # in $du (destination URI).
> route(1);
> } else {
> /* uncomment the following lines if you want
> to enable presence */
> ##if (is_method("SUBSCRIBE") && $rd ==
> "your.server.ip.address") {
> ## # in-dialog subscribe requests
> ## route(2);
> ## exit;
> ##}
> if ( is_method("ACK") ) {
> if ( t_check_trans() ) {
> # non loose-route, but
> stateful ACK; must be an ACK after
> # a 487 or e.g. 404 from upstream server
> t_relay();
> exit;
> } else {
> # ACK without matching transaction ->
> # ignore and discard
> exit;
> }
> }
> sl_send_reply("404","Not here");
> }
> exit;
> }
>
> #initial requests
>
> # CANCEL processing
> if (is_method("CANCEL"))
> {
> if (t_check_trans())
> t_relay();
> exit;
> }
>
> t_check_trans();
>
> # authenticate if from local subscriber (uncomment to enable auth)
> # authenticate all initial non-REGISTER request that pretend to be
> # generated by local subscriber (domain from FROM URI is local)
> ##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/
> if (!(method=="REGISTER") && from_uri==myself) /*no
> multidomain version*/
> {
> if (!proxy_authorize("", "subscriber")) {
> proxy_challenge("", "0");
> exit;
> }
> if (!check_from()) {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
>
> consume_credentials();
> # caller authenticated
> }
>
> # preloaded route checking
> if (loose_route()) {
> xlog("L_ERR",
> "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
> if (!is_method("ACK"))
> sl_send_reply("403","Preload Route denied");
> exit;
> }
>
> # record routing
> if (!is_method("REGISTER|MESSAGE"))
> record_route();
>
> # account only INVITEs
> if (is_method("INVITE")) {
> setflag(1); # do accounting
> }
> if (!uri==myself)
> ## replace with following line if multi-domain support is used
> ##if (!is_uri_host_local())
> {
> append_hf("P-hint: outbound\r\n");
> # if you have some interdomain connections via TLS
> ##if($rd=="tls_domain1.net") {
> ## t_relay("tls:domain1.net");
> ## exit;
> ##} else if($rd=="tls_domain2.net") {
> ## t_relay("tls:domain2.net");
> ## exit;
> ##}
> route(1);
> }
>
> # requests for my domain
>
> ## uncomment this if you want to enable presence server
> ## and comment the next 'if' block
> ## NOTE: uncomment also the definition of route[2] from below
> ##if( is_method("PUBLISH|SUBSCRIBE"))
> ## route(2);
>
> if (is_method("PUBLISH"))
> {
> sl_send_reply("503", "Service Unavailable");
> exit;
> }
>
>
> if (is_method("REGISTER"))
> {
> # authenticate the REGISTER requests (uncomment to enable auth)
> if (!www_authorize("", "subscriber"))
> {
> www_challenge("", "0");
> exit;
> }
>
> if (!check_to())
> {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
>
> if (!save("location"))
> sl_reply_error();
>
> exit;
> }
>
> if ($rU==NULL) {
> # request with no Username in RURI
> sl_send_reply("484","Address Incomplete");
> exit;
> }
>
> # apply DB based aliases (uncomment to enable)
> ##alias_db_lookup("dbaliases");
>
> # do lookup with method filtering
> if (!lookup("location","m")) {
> switch ($retcode) {
> case -1:
> case -3:
> t_newtran();
> t_reply("404", "Not Found");
> exit;
> case -2:
> sl_send_reply("405", "Method Not Allowed");
> exit;
> }
> }
>
> # when routing via usrloc, log the missed calls also
> setflag(2);
>
> route(1);
> }
>
>
> route[1] {
> # for INVITEs enable some additional helper routes
> if (is_method("INVITE")) {
> t_on_branch("2");
> t_on_reply("2");
> t_on_failure("1");
> }
>
> if (!t_relay()) {
> sl_reply_error();
> };
> exit;
> }
>
>
> # Presence route
> /* uncomment the whole following route for enabling presence
> NOTE: do not forget to enable the call of this route from the main
> route */
> ##route[2]
> ##{
> ## if (!t_newtran())
> ## {
> ## sl_reply_error();
> ## exit;
> ## };
> ##
> ## if(is_method("PUBLISH"))
> ## {
> ## handle_publish();
> ## t_release();
> ## }
> ## else
> ## if( is_method("SUBSCRIBE"))
> ## {
> ## handle_subscribe();
> ## t_release();
> ## }
> ##
> ## exit;
> ##}
>
>
> branch_route[2] {
> xlog("new branch at $ru\n");
> }
>
>
> onreply_route[2] {
> xlog("incoming reply\n");
> }
>
>
> failure_route[1] {
> if (t_was_cancelled()) {
> exit;
> }
>
> # uncomment the following lines if you want to block client
> # redirect based on 3xx replies.
> ##if (t_check_status("3[0-9][0-9]")) {
> ##t_reply("404","Not found");
> ## exit;
> ##}
>
> # uncomment the following lines if you want to redirect the failed
> # calls to a different new destination
> ##if (t_check_status("486|408")) {
> ## sethostport("192.168.2.100:5060");
> ## # do not set the missed call flag again
> ## t_relay();
> ##}
> }
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
More information about the Users
mailing list