[OpenSIPS-Users] OPENSIPS+ASTERISK Integration
Premalatha Kuppan
premalatha at ngintech.com
Thu Jun 10 22:16:41 CEST 2010
Yes, i have checked all these options. Everything is in correct status.
I doubt, connecting between vmware and with 64 bit RHEL. My set is running
on vmware image. When i ping on from vmware where opensips+asterisk is
running to the MySQL server vmware image, i see this problem. But when i set
MySQL server on non-vmware, it works perferctly fine.
i 'll update once i figure out the reason.
Between, to route a call from OPENSIP to the destination. I need to fetch
the destination details IP from MySQL DB.
Meaning,
User -------->
OPENSIPS(1)--------->ASTERISK(IVR)-------------->OPENSIPS(1)----------------->Destination
Here, for authentication user enters the PIn and extension to access, if the
extension is present in the DB, Asterisk(IVR) will allow the user to access
it. From this from asterisk, i can make query to DB and fetch the neccessary
details. Likewise is it possible to fetch the details(IP where the extension
is connected and to be routed) from DB from opensips.cfg to route the call
to requested destination.
Thanks,
Prem
On Thu, Jun 10, 2010 at 3:01 PM, Bogdan-Andrei Iancu <bogdan at voice-system.ro
> wrote:
> Are you sure the DB conn params are correct (like address of myql server) ?
>
> Also are you sure the mysql server is remotely reachable (it listens on
> routable IP and there is no firewall in front)
>
> Have you tried to connect to mysql by using directly the mysql client -
> just to see if it works?
>
> Regards,
> Bogdan
>
> Premalatha Kuppan wrote:
> > Iam facing one more problem.
> >
> > Iam running my set up on 64bit processor. Opensips and asterisk on one
> > PC and Mysql server on seperate PC.
> >
> > Iam running on RHEL enterprise version.
> >
> > Problem is that, its taking more than 2 mins to connect to MySQL
> > server when i start Opensips. Also user is not getting registered. of
> > 10 attmept, only 1 is getting successful. But even this is not
> consistent.
> >
> > I have increased connection_timeout in /etc/my.cnf also. But still
> > facing the same problem.
> >
> > Any insight ?
> >
> >
> > Jun 9 03:36:03 204548-4 /usr/local/sbin/opensips[7575]:
> > DBG:db_mysql:db_mysql_connect: opening connection:
> > mysql://xxxx:xxxx@MySQLserver/opensips
> > Jun 9 03:36:03 204548-4 /usr/local/sbin/opensips[7576]:
> > DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=acc
> > Jun 9 03:36:03 204548-4 /usr/local/sbin/opensips[7576]:
> > DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=auth_db
> > Jun 9 03:36:03 204548-4 /usr/local/sbin/opensips[7576]:
> > DBG:core:db_do_init: connection 0x79e858 not found in pool
> > Jun 9 03:36:03 204548-4 /usr/local/sbin/opensips[7576]:
> > DBG:db_mysql:db_mysql_connect: opening connection:
> > mysql://xxxx:xxxx@MySQLserver/opensips
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:db_mysql:db_mysql_connect: driver error(2003): Can't connect to
> > MySQL server on 'MySQLserver' (110)
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:db_mysql:db_mysql_new_connection: initial connect failed
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:core:db_do_init: could not add connection to the pool
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:auth_db:child_init: unable to connect to the database
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:core:init_mod_child: failed to initializing module auth_db, rank 3
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7567]:
> > ERROR:core:main_loop: init_child failed for UDP listener
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:db_mysql:db_mysql_connect: driver error(2003): Can't connect to
> > MySQL server on 'MySQL server' (110)
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:db_mysql:db_mysql_new_connection: initial connect failed
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:core:db_do_init: could not add connection to the pool
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:usrloc:child_init: child(0): failed to connect to database
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:core:init_mod_child: failed to initializing module usrloc, rank 0
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > ERROR:core:main_loop: error in init_child for PROC_MAIN
> > Jun 9 03:39:12 204548-4 /usr/local/sbin/opensips[7341]:
> > DBG:xlog:destroy: destroy module...
> >
> > On Wed, Jun 9, 2010 at 1:04 PM, ram <talk2ram at gmail.com
> > <mailto:talk2ram at gmail.com>> wrote:
> >
> > depends on the design
> >
> > you can have one point of authenticaion and transaction
> >
> > Ram
> >
> >
> >
> > On Tue, Jun 8, 2010 at 10:59 PM, Premalatha Kuppan
> > <premalatha at ngintech.com <mailto:premalatha at ngintech.com>> wrote:
> >
> > Thanks a lot.
> >
> > I have one question. If i route the call to asterisk for IVR (
> > in my case ivr is to authenticate the user to access the
> > system), who will have the control, meaning who will maintian
> > all the transactions and dailog. Is it opensips/Asterisk ?
> >
> > Thanks,
> > Prem
> >
> > On Tue, Jun 8, 2010 at 9:50 AM, Gabriel Bermudez
> > <elgabo81 at gmail.com <mailto:elgabo81 at gmail.com>> wrote:
> >
> > Hi,
> >
> > I basically use the load_balancer module to dispatch to
> > different
> > asterisk servers
> >
> > on the main route block after handling auth,
> > registrations, etc
> >
> > if(db_is_user_in("Request-URI", "ccivr")) {
> > xlog("The call will be redirect to calling card
> > server");
> > route(3);
> > }
> >
> > # route for call handled by calling card servers
> > route[3] {
> > # for INVITEs enable some additional helper routes
> > if (is_method("INVITE")) {
> > t_on_branch("2");
> > t_on_reply("2");
> > t_on_failure("1");
> > if(client_nat_test("15")) {
> > nat_keepalive();
> > }
> > }
> >
> > # prepare the message for the IVR
> >
> > # select less loaded IVR
> > if(!load_balance("1", "ccivr")) {
> > xlog("No IVR available !!!");
> > sl_send_reply("503", "Service Unavailable");
> > exit;
> > };
> >
> > if(!t_relay()) {
> > sl_reply_error();
> > exit;
> > }
> >
> > exit;
> >
> > }
> >
> >
> > Hope it helps
> >
> > Regards,
> >
> > 2010/6/8 ram <talk2ram at gmail.com <mailto:talk2ram at gmail.com
> >>:
> > > I forgot the link
> > >
> > > i did this work some time back
> > >
> > > Lost the link, google it
> > >
> > > Opensips+asterisk+a2b
> > >
> > > Ram
> > >
> > > On Mon, Jun 7, 2010 at 4:07 PM, Premalatha Kuppan
> > <premalatha at ngintech.com <mailto:premalatha at ngintech.com>>
> > > wrote:
> > >>
> > >> Can you pleae guide me how to do this ?
> > >>
> > >> On Mon, Jun 7, 2010 at 4:04 PM, Douglas Lane
> > <doug at wd.co.za <mailto:doug at wd.co.za>> wrote:
> > >>>
> > >>> Hi Premalatha,
> > >>>
> > >>> Perhaps have a look at SEMS for this.
> > >>>
> > >>> Thanks
> > >>> Doug
> > >>>
> > >>>
> > >>> On 2010/06/07 12:30 PM, Premalatha Kuppan wrote:
> > >>>
> > >>> Thanks Sebastian.
> > >>>
> > >>> I have followed up this link and tried extending the
> > opensips.cfg file to
> > >>> route call to Asterisk.
> > >>>
> > >>> I doubt/not clear that after IVR (meaning when the
> > user is authenticated
> > >>> through IVR) who will handle all the transactions and
> > dialog (OPENSIPS or
> > >>> Asterisk ) ?
> > >>>
> > >>> I want Opensips to handle all the transactions.
> > >>>
> > >>> Any insight on this ?
> > >>>
> > >>> Thanks,
> > >>> Prem
> > >>>
> > >>> On Mon, Jun 7, 2010 at 3:15 PM, Schumann Sebastian
> > >>> <Sebastian.Schumann at t-com.sk
> > <mailto:Sebastian.Schumann at t-com.sk>> wrote:
> > >>>>
> > >>>> Hi Prem
> > >>>>
> > >>>> There is a good tutorial at
> > >>>> http://www.opensips.org/Resources/DocsTutAsterisk It
> > does exactly what you
> > >>>> need I assume.
> > >>>>
> > >>>> For details in writing and extending basic
> > configuration, you can find
> > >>>> also the linked documentation there.
> > >>>>
> > >>>> Best regards
> > >>>> Sebastian
> > >>>>
> > >>>> > -----Original Message-----
> > >>>> > From: users-bounces at lists.opensips.org
> > <mailto:users-bounces at lists.opensips.org> [mailto:users-
> > <mailto:users->
> > >>>> > bounces at lists.opensips.org
> > <mailto:bounces at lists.opensips.org>] On Behalf Of
> > Premalatha Kuppan
> > >>>> > Sent: Monday, 07. June 2010 11:35
> > >>>> > To: OpenSIPS users mailling list
> > >>>> > Subject: [OpenSIPS-Users] OPENSIPS+ASTERISK
> Integration
> > >>>> >
> > >>>> > Hi,
> > >>>> >
> > >>>> > Can anyone guide me in building the Opensips and
> > Asterisk Integration.
> > >>>> >
> > >>>> > I want to Use OpenSIPS as SIP PROXY (i.e all
> > transactions and dialogs
> > >>>> > should be
> > >>>> > handled by Opensips) and Asterisk to do only IVR
> > functionality.
> > >>>> >
> > >>>> > I appreciate if anyone can guide me in writing a
> > routing logic from
> > >>>> > Opensips to
> > >>>> > Asterisk for IVR and futher call flow OPENSIPS to
> > handle.
> > >>>> >
> > >>>> > Thanks,
> > >>>> > Prem
> > >>>> >
> > >>>>
> > >>>>
> > >>>> _______________________________________________
> > >>>> Users mailing list
> > >>>> Users at lists.opensips.org
> > <mailto:Users at lists.opensips.org>
> > >>>>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> Users mailing list
> > >>> Users at lists.opensips.org <mailto:
> Users at lists.opensips.org>
> > >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> Users mailing list
> > >>> Users at lists.opensips.org <mailto:
> Users at lists.opensips.org>
> > >>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>>
> > >>
> > >>
> > >> _______________________________________________
> > >> Users mailing list
> > >> Users at lists.opensips.org <mailto:Users at lists.opensips.org
> >
> > >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>
> > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >
> > >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org <mailto:Users at lists.opensips.org>
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
>
>
> --
> Bogdan-Andrei Iancu
> www.voice-system.ro
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20100610/68c77728/attachment-0001.htm
More information about the Users
mailing list