[OpenSIPS-Users] T38 and changing media port for T38 SDP

[Julian Yap]

Hi All,

I managed to get it working by adding a whole lot of debugging and a
whole lot of rtpproxy_offer() and rtpproxy_answer().

Now I need to clean up my config because it's a total mess.

- Julian

On Tue, Jul 6, 2010 at 10:07 AM, Bogdan-Andrei Iancu
<bogdan at voice-system.ro> wrote:
> Hi Julian,
>
> Do you trigger again the rtpproxy at re-INVITE time ? basically you need
> to do the insertion of rtpproxy again, as for the initial INVITE.
>
> Regards,
> Bogdan
>
> Julian Yap wrote:
>> Any help greatly appreciated!
>>
>> I'm having problems with a T38 UA which changes port when negotiating
>> T38 media.  All the other UA's I've encountered thus far use the same
>> RTP port throughout.
>>
>> I'm also using RTPProxy.
>>
>> In the final 200 OK SDP, the UA changes media port from 49200 to 49152
>> but this changeover isn't detected and the media is sent back to port
>> 49200 so the call then fails to negotiate T38 properly.  Not sure how
>> to log the port changes to further debug this issue as well.
>>
>> Here is the flow:
>> | UA                | OpenSIPS          | T38 GW            |
>> |         INVITE SDP ( g711U)           |                   |
>> |(5060)   ------------------>  (5060)   |                   |
>> |         100 Trying|                   |                   |
>> |(5060)   <------------------  (5060)   |                   |
>> |                   |         INVITE SDP ( g711U)           |
>> |                   |(5060)   ------------------>  (5060)   |
>> |                   |         100 Trying|                   |
>> |                   |(5060)   <------------------  (5060)   |
>> |                   |         180 Ringing SDP ( g711U)      |
>> |                   |(5060)   <------------------  (5060)   |
>> |                   |         200 OK SDP ( g711U)           |
>> |                   |(5060)   <------------------  (5060)   |
>> |                   |         RTP (g711U)                   |
>> |                   |(11392)  <------------------  (14110)  |
>> |         RTP (g711U)                   |                   |
>> |(49200)  <------------------  (10878)  |                   |
>> |         180 Ringing SDP ( g711U)      |                   |
>> |(5060)   <------------------  (5060)   |                   |
>> |         RTP (g711U)                   |                   |
>> |(49200)  ------------------>  (10878)  |                   |
>> |                   |         RTP (g711U)                   |
>> |                   |(11392)  ------------------>  (14110)  |
>> |         200 OK SDP ( g711U)           |                   |
>> |(5060)   <------------------  (5060)   |                   |
>> |         ACK       |                   |                   |
>> |(5060)   ------------------>  (5060)   |                   |
>> |         RTP (g711U)                   |                   |
>> |(49200)  ------------------>  (10878)  |                   |
>> |         RTP (g711U)                   |                   |
>> |(49200)  <------------------  (10878)  |                   |
>> |                   |         200 OK SDP ( g711U)           |
>> |                   |(5060)   <------------------  (5060)   |
>> |                   |         RTP (g711U)                   |
>> |                   |(11392)  ------------------>  (14110)  |
>> |                   |         ACK       |                   |
>> |                   |(5060)   ------------------>  (5060)   |
>> |         200 OK SDP ( g711U)           |                   |
>> |(5060)   <------------------  (5060)   |                   |
>> |         ACK       |                   |                   |
>> |(5060)   ------------------>  (5060)   |                   |
>> |         RTP (g711U)                   |                   |
>> |(49200)  ------------------>  (10878)  |                   |
>> |         RTP (g711U)                   |                   |
>> |(49200)  <------------------  (10878)  |                   |
>> |                   |         ACK       |                   |
>> |                   |(5060)   ------------------>  (5060)   |
>> |                   |         INVITE SDP ( t38)             |
>> |                   |(5060)   <------------------  (5060)   |
>> |         INVITE SDP ( t38)             |                   |
>> |(5060)   <------------------  (5060)   |                   |
>> |         200 OK SDP ( t38)             |                   |
>> |(5060)   ------------------>  (5060)   |                   |
>>
>> This is where it sends the 200 OK with a different media port.
>>
>> - Julian
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
>
> --
> Bogdan-Andrei Iancu
> OpenSIPS Bootcamp
> 20 - 24 September 2010, Frankfurt, Germany
> www.voice-system.ro
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>