[OpenSIPS-Users] Core Dump
Anca Vamanu
anca at opensips.org
Thu Feb 25 09:39:02 CET 2010
Hi Nathaniel,
The path were opensips will look for modules at startup is what you set
in you configuration file - parameter "mpath". So set this to the
correct value: mpath=/usr/local/opensips-1.6.1/lib/opensips/modules/ .
Regards,
--
Anca Vamanu
www.voice-system.ro
Nathaniel L Keeling III wrote:
> Hello Bogdan,
>
> Opensips compiled ok but when I executed opensips, the modules could not
> be found. The modules were expected to be in the lib64 directory and not
> the lib directory of opensips. I have included a sample of the output.
> # make clean
> # make prefix=/usr/local/opensips-1.6.1 all
> # make prefix=/usr/local/opensips-1.6.1 install
>
> # /usr/local/opensips-1.6.1/sbin/opensips
> Feb 25 01:51:21 [6370] ERROR:core:yyparse: module 'signaling.so' not
> found in '/usr/local/opensips-1.6.1/lib64/opensips/modules/'
> Feb 25 01:51:21 [6370] CRITICAL:core:yyerror: parse error in config
> file, line 78, column 13-14: failed to load module
> Feb 25 01:51:21 [6370] DBG:core:yyparse: loading module
> /usr/local/opensips-1.6.1/lib64/opensips/modules/
> Feb 25 01:51:21 [6370] ERROR:core:sr_load_module: could not open module
> </usr/local/opensips-1.6.1/lib64/opensips/modules/>: ld.so.1: opensips:
> fatal: /usr/local/opensips-1.6.1/lib64/opensips/modules/: open failed:
> No such file or directory
> Feb 25 01:51:21 [6370] CRITICAL:core:yyerror: parse error in config
> file, line 78, column 13-14: failed to load module
> Feb 25 01:51:21 [6370] ERROR:core:yyparse: module 'sl.so' not found in
> '/usr/local/opensips-1.6.1/lib64/opensips/modules/'
> Feb 25 01:51:21 [6370] CRITICAL:core:yyerror: parse error in config
> file, line 79, column 13-14: failed to load module
> Feb 25 01:51:21 [6370] DBG:core:yyparse: loading module
> /usr/local/opensips-1.6.1/lib64/opensips/modules/
> Feb 25 01:51:21 [6370] ERROR:core:sr_load_module: could not open module
> </usr/local/opensips-1.6.1/lib64/opensips/modules/>: ld.so.1: opensips:
> fatal: /usr/local/opensips-1.6.1/lib64/opensips/modules/: open failed:
> No such file or directory
>
> Feb 25 01:42:20 [6368] CRITICAL:core:yyerror: parse error in config
> file, line 81, column 13-14: failed to load module
> Feb 25 01:42:20 [6368] ERROR:core:yyparse: module 'maxfwd.so' not found
> in '/usr/local/opensips-1.6.1/lib64/opensips/modules/'
> Feb 25 01:42:20 [6368] CRITICAL:core:yyerror: parse error in config
> file, line 82, column 13-14: failed to load module
> Feb 25 01:42:20 [6368] DBG:core:yyparse: loading module
> /usr/local/opensips-1.6.1/lib64/opensips/modules/
> Feb 25 01:42:20 [6368] ERROR:core:sr_load_module: could not open module
> </usr/local/opensips-1.6.1/lib64/opensips/modules/>: ld.so.1: opensips:
> fatal: /usr/local/opensips-1.6.1/lib64/opensips/modules/: open failed:
> No such file or directory
> Feb 25 01:42:20 [6368] CRITICAL:core:yyerror: parse error in config
> file, line 82, column 13-14: failed to load module
> Feb 25 01:42:20 [6368] ERROR:core:yyparse: module 'textops.so' not found
> in '/usr/local/opensips-1.6.1/lib64/opensips/modules/'
> Feb 25 01:42:20 [6368] CRITICAL:core:yyerror: parse error in config
> file, line 83, column 13-14: failed to load module
> Feb 25 01:42:20 [6368] DBG:core:yyparse: loading module
> /usr/local/opensips-1.6.1/lib64/opensips/modules/
> Feb 25 01:42:20 [6368] ERROR:core:sr_load_module: could not open module
> </usr/local/opensips-1.6.1/lib64/opensips/modules/>: ld.so.1: opensips:
> fatal: /usr/local/opensips-1.6.1/lib64/opensips/modules/: open failed:
> No such file or directory
>
>
> Thanks
>
> Nathaniel
>
> Bogdan-Andrei Iancu wrote:
>
>
>> Hi Nathaniel,
>>
>> Ah, interesting....first reports non-64 sparc, second does :P....
>>
>> Please try to comment in Makefile.defs (around line 87) the block (whole
>> block):
>> # fix sparc -> sparc64
>> ifeq ($(ARCH),sparc)
>> ifeq ($(shell uname -m),sun4u)
>> ARCH := sparc64
>> endif
>> ifeq ($(shell uname -m),sun4v)
>> ARCH := sparc64
>> endif
>> endif
>>
>> and recompile the whole stuff.
>>
>> Thanks and regards,
>> Bogdan
>>
>> Nathaniel L Keeling III wrote:
>>
>>
>>
>>> Here is the output from the commands:
>>>
>>> # uname -p
>>> sparc
>>> # uname -m
>>> sun4u
>>> #
>>>
>>> Thanks
>>>
>>> Nathaniel
>>>
>>> Bogdan-Andrei Iancu wrote:
>>>
>>>
>>>
>>>
>>>
>>>> Please run in shell "uname -p" and "uname -m" and post here the output.
>>>>
>>>> Thanks and regards,
>>>> Bogdan
>>>>
>>>> Nathaniel L Keeling III wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> Bogdan,
>>>>>
>>>>> this is the error that I get when I do not add that option:
>>>>>
>>>>> gcc -g -O9 -funroll-loops -Wall -DNAME='"opensips"'
>>>>> -DVERSION='"1.6.1-notls"' -DARCH='"sparc64"' -DOS='"solaris"' -DCOMPILE
>>>>> R='"gcc 3.4.6"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_yes
>>>>> -DCFG_DIR='"/usr/local/opensips-1.6.1/etc/opensips/"' -DPKG_MALLOC -DSHM
>>>>> _MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
>>>>> -DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLO
>>>>> C -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
>>>>> -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -DHAVE_ALL
>>>>> OCA_H -DUSE_SIGACTION -D_POSIX_PTHREAD_SEMANTICS -DHAVE_DEVPOLL
>>>>> -DHAVE_SELECT -c blacklists.c -o blacklists.o
>>>>> */usr/ccs/bin/as: "/var/tmp//ccww7Koi.s", line 223: error: cannot use
>>>>> v8plus instructions in a non-v8plus target binary
>>>>> /usr/ccs/bin/as: "/var/tmp//ccww7Koi.s", line 243: error: cannot use
>>>>> v8plus instructions in a non-v8plus target binary*
>>>>>
>>>>> I get the same error when compiling opensips 1.5
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Nathaniel
>>>>>
>>>>> Bogdan-Andrei Iancu wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> Hi Brian,
>>>>>>
>>>>>> opensipslist at encambio.com wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Hello Nathaniel,
>>>>>>>
>>>>>>> An jeu., févr 18, 2010, Nathaniel L Keeling schrieb:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> I have compiled opensips 1.6.1 on Solaris Sparc 10. I was able to
>>>>>>>> compile successfully by adding the parameter "-mcpu=ultrasparc" to
>>>>>>>> the "DEFS" compile time options in Makefile.defs, but when I
>>>>>>>> execute opensips, it will die with a core dump. It does thru the
>>>>>>>> loading of the modules ok but dies later.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> Both Solaris 10 Sparc or Solaris 11 x86 do core dump when trying
>>>>>>> to use OpenSIPS 1.6.1. Nobody has seem to be able to diagnose this
>>>>>>> correctly much less repair the problem.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> How comes ? I know people using 1.6 on sparc + Solaris :P....
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> If you try the same build parameters to compile 1.6.0 you will
>>>>>>> probably find that it not only compiles correctly but runs without
>>>>>>> core dumping as well. So much for the
>>>>>>>
>>>>>>> 'it is recommended to upgrade, as it provides important
>>>>>>> stability improvements'
>>>>>>>
>>>>>>> that they write about the 1.6.1 release on the website.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> hmmm...if you see the compiling as stability, maybe you are right....
>>>>>>
>>>>>> Now, getting serious....the problem is that since SF trashed the
>>>>>> compiled farm, we (or at least I) do not have any sparc / solaris
>>>>>> platform were to test the makefile options or the code....
>>>>>>
>>>>>> Regards,
>>>>>> Bogdan
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
More information about the Users
mailing list