[OpenSIPS-Users] drouting module 1.6.3 with b2b

[Anton Zagorskiy]

Yes, openSIPS crashed because of there are "INFO:core:sig_usr: signal 15
received" messages in a log file.
I've tested on new VM with CentOS 5.5 with sources from svn stable release

Please see bt and bt full results in the attach.


Code:

route
{
	[skipped]

	if (!do_routing())
	{
	    xlog("*** !!! route[invite]: No rules found for do_routing().
STOP");
	    send_reply("503", "Error");
	    exit;
	};
	xlog("*** route[invite]: do_routing() passed");
	xlog("*** route[invite]: dr_attrs: $avp(s:dr_attrs); ruri:
$avp(s:dr_ruri)");
	route(main_route);

	[skipped]
}



route[main_route]
{
    xlog("*** +++ route[main_route] has started");

    if (is_method("INVITE"))
    {
	t_on_branch("2");
	t_on_reply("2");
	t_on_failure("1");
    };

    if (!t_relay())
    {
	sl_reply_error();
    };

    xlog("*** --- route[main_route] has finished");
}





WBR, Anton Zagorskiy
VoIP Developer, Oyster Telecom
Phone.: +7 812 601-0666
Fax: +7 812 601-0593
a.zagorskiy at oyster-telecom.ru
www.oyster-telecom.ru


> -----Original Message-----
> From: users-bounces at lists.opensips.org [mailto:users-
> bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
> Sent: Tuesday, December 14, 2010 4:25 PM
> To: OpenSIPS users mailling list
> Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> 
> Hi Anton,
> 
> Why do you say it crashes ? do you have a corefile ?
> 
> your logs do not show any t_relay() after do_routing()....could you
> post
> the relevant snip of your cfg?
> 
> Regards,
> Bogdan
> 
> Anton Zagorskiy wrote:
> > Hi!
> >
> > I'm trying to use drouting module, but something says to me that I
> using it
> > wrong because openSIPS goes to crash.
> >
> > I've inserted following values in the DB:
> >
> > 1. dr_gateways:
> >
> > gwid(2)
> > type(1)
> > address(192.168.0.10)
> > strip(0)
> > pri_prefix(1000)
> > attrs("")
> > probe_mode(0)
> > description(Gateway1)
> >
> > 2. dr_groups:
> > id(1)
> > username(100)
> > domain(mydomain.com)
> > groupid(1)
> > description(All-Test)
> >
> > 3. dr_gw_lists:
> > id(2)
> > gwlist(2)
> > description(Test)
> >
> > 4. dr_rules:
> > ruleid(1)
> > groupid(1)
> > prefix(89112599077)
> > timerec("")
> > priority(1)
> > routeid("")
> > gwlist(#2)
> > description(Test)
> > attrs("")
> >
> >
> > So, I'm calling from 100 at mydomain.com to 89112599077.
> > I'm expecting that this will be routed to 192.168.0.10 with R-URI
> > 100089112599077 at .. Right?
> >
> > But when I'm calling do_routing() the same INVITE is passed to the
> main
> > route block and I'm again calling do_routing (Nothing changed in the
> script
> > :)) and opensips is crashing...
> >
> > Log file hasn't helpful messages:
> >
> > [8031]: *** route[invite]: call do_routing()
> > [8031]: DBG:core:db_new_result: allocate 28 bytes for result set at
> > 0x81ddb78
> > [8031]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned from
> the query
> > [8031]: DBG:core:db_allocate_columns: allocate 16 bytes for result
> columns
> > at 0x81ddba4
> > [8031]: DBG:db_mysql:db_mysql_get_columns:
> RES_NAMES(0x81ddba8)[0]=[groupid]
> > [8031]: DBG:db_mysql:db_mysql_get_columns: use DB_INT result type
> > [8031]: DBG:core:db_allocate_rows: allocate 28 bytes for result rows
> and
> > values at 0x81ddbd0
> > [8031]: DBG:db_mysql:db_mysql_str2val: converting INT [1]
> > [8031]: DBG:core:db_free_columns: freeing result columns at 0x81ddba4
> > [8031]: DBG:core:db_free_rows: freeing 1 rows
> > [8031]: DBG:core:db_free_row: freeing row values at 0x81ddbd8
> > [8031]: DBG:core:db_free_rows: freeing rows at 0x81ddbd0
> > [8031]: DBG:core:db_free_result: freeing result set at 0x81ddb78
> > [8031]: DBG:drouting:do_routing: using dr group 1
> > [8031]: DBG:drouting:internal_check_rt: found rgid 1 (rule list
> 0xb60c0d0c)
> > [8034]: DBG:tm:utimer_routine: timer routine:4,tl=0xb60c34b4
> next=(nil),
> > timeout=11900000
> > [8034]: DBG:tm:retransmission_handler: retransmission_handler :
> request
> > resending (t=0xb60c3368, INVITE si ... )
> > [8034]: DBG:tm:set_timer: relative timeout is 2000000
> > [8034]: DBG:tm:insert_timer_unsafe: [5]: 0xb60c34b4 (13900000)
> > [8034]: DBG:tm:retransmission_handler: retransmission_handler : done
> > [8032]: DBG:core:parse_msg: SIP Request:
> > [8032]: DBG:core:parse_msg:  method:  <INVITE> (# The same INVITE is
> > coming!)
> >
> > What I'm doing wrong?
> >
> >
> 
> 
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: new.txt
URL: <http://lists.opensips.org/pipermail/users/attachments/20101214/6a3dfaf4/attachment-0001.txt>