[OpenSIPS-Users] Hardware requirement for opensip

[Laszlo]

If I were you, I'd try with some very basic logic in your script first.

In a real world enviroment, with some nice features enabled (including all
DB stuff, radius, DNS lookups, accounting), you will never reach a big cps
figure.

Opensips itself is fast enough, but when you introduce stuff like accounting
and so on, you won't get nice figures in cps.
I'd try first with a basic config, and measure it with sipp.
And add one feature, then measure it again with sipp (it won't hurt if you
run sipp on a separate server).
Measure the performance after adding a new feature, also use the benchmark (
http://www.opensips.org/html/docs/modules/1.6.x/benchmark.html)

Nobody can answer your question other than you :)

-Laszlo


2010/12/8 Vic Jolin <victor.jolin at gmail.com>

> Can you give me a glimpse of your configuration? maybe just the basic
> routing you have?
>
>
> On Fri, Dec 3, 2010 at 11:01 PM, Laszlo <laszlo at voipfreak.net> wrote:
>
>> From my experience, 2000 cps is doable without bigger retransmissions.
>> The box is:
>>
>> E5640 Quadcore xeon + 6GB RAM (less than 50% used)
>> Kingston SSD disks
>>
>> The proxy is used for aggregating US and Canadian callcenter traffic,
>> drouting ( 3 vendors, 30k codes each), no nat, no registrar, etc, just IP
>> auth.
>>
>> -Laszlo
>>
>> (It is just my experience, not a suggestion or a recommendation)
>>
>>
>>
>>
>> 2010/12/3 Vic Jolin <victor.jolin at gmail.com>
>>
>>> Main purpose of the proxy will be for routing outbound and inbound calls.
>>> Functions I might be using is authentication and lcr
>>>
>>>
>>> On Fri, Dec 3, 2010 at 10:48 PM, Laszlo <laszlo at voipfreak.net> wrote:
>>>
>>>> Hi,
>>>>
>>>> It depends on what will be the purpose of opensips (what functions you
>>>> will use, etc)
>>>>
>>>> -Laszlo
>>>>
>>>> 2010/12/3 Vic Jolin <victor.jolin at gmail.com>
>>>>
>>>>> Hi all,
>>>>>
>>>>> Just wanted to ask what is the hardware requirement to achieve at least
>>>>> 5000 cps? Is that even possible?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at lists.opensips.org
>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opensips.org/pipermail/users/attachments/20101208/3d1e3f2c/attachment.htm>