[OpenSIPS-Users] NAT Problem using Nat helper
Antonio Anderson Souza
antonio at voicetechnology.com.br
Fri Apr 30 00:34:16 CEST 2010
Ahmed,
Could you send an wireshark trace to the list? It will be easier to check
what's going wrong.
Besta regards,
Antonio Anderson M. Souza
Voice Technology
http://www.antonioams.com
Em 29/04/2010 11:47, "Ahmed Munir" <ahmedmunir007 at gmail.com>escreveu:
Hi,
I've configured OpenSIPs with FreeRadius, the version for OpenSIPs I'm using
is 1.6.1 and FreeRadius verison is update 2 date. When I register 2
sofphone, they got authenticated and authorized by radius and got
registered sucessfully. Even I made calls between two softphone
sucessfully(Can hear one another). The UAS configured on different network
means hosted with public IP and my softphones are registered other and NATed
network. I mapped a DID on UAS and mapped it on my one of my softphone. The
problem I'm facing is when call coming from DID and ring my phone the caller
can hear me but I can't hear the caller(one way calling issue). But not
facing the problem on when calling between to sip clients and also calling
from OpenSIPs to Asterisk. The configuration and cases for OpenSIPs is
listed down below;
UAC--------------> UAS(OpenSIPs) --------------------->
UAC two way voice is establised
UAC--------------> UAS(OpenSIPs) ---------------------> Asterisk
--------------------> UAC two way voice is establised
PSTN--------------> UAS(OpenSIPs)
---------------------> UAC one way
voice is establised
(hears the dest voice) (can't hear caller
voice)
#loadmodule "auth_diameter.so"
loadmodule "aaa_radius.so"
loadmodule "auth_aaa.so"
loadmodule "permissions.so"
loadmodule "nathelper.so"
#--------------------------------Settings For
Radius-------------------------------------
#modparam("auth_diameter", "diameter_client_host", "localhost")
modparam("aaa_radius",
"radius_config","/usr/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "aaa_url",
"radius:/usr/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "aaa_flag", 2)
modparam("acc", "aaa_missed_flag", 3)
modparam("acc", "aaa_extra", "User-Name=$Au; \
Calling-Station-Id=$from; \
Called-Station-Id=$to; \
Sip-Translated-Request-URI=$ruri; \
Sip-RPid=$avp(s:rpid); \
Source-IP=$si; \
Source-Port=$sp; \
Canonical-URI=$avp(s:can_uri); \
Billing-Party=$avp(s:billing_party); \
Divert-Reason=$avp(s:divert_reason); \
X-RTP-Stat=$hdr(X-RTP-Stat); \
Contact=$hdr(contact); \
Event=$hdr(event); \
SIP-Proxy-IP=$avp(s:sip_proxy_ip); \
ENUM-TLD=$avp(s:enum_tld)")
modparam("auth_aaa","aaa_url","radius:/usr/etc/radiusclient-ng/radiusclient.conf")
modparam("auth", "rpid_prefix", "<sip:")
modparam("auth", "rpid_suffix", "@11.22.33.44>;screen=yes;privacy=off")
modparam("auth", "rpid_avp", "$avp(s:rpid)")
#modparam("uri","service_type",10)
# ----------------- setting module-specific parameters ---------------
modparam("dispatcher", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
modparam("permissions", "db_url", "mysql://opensips:opensipsrw@localhost
/opensips")
#----------------- setting NAT module parameters ---------------------
modparam("nathelper","ping_nated_only",1)
modparam("nathelper", "natping_interval", 30)
modparam("nathelper","natping_processes",1)
#modparam("nathelper","rtpproxy_sock","udp:127.0.0.1:7890")
modparam("nathelper","rtpproxy_sock"," ")
modparam("nathelper","received_avp","$avp(i:42)")
#modparam("nathelper", "sipping_bflag", 7)
modparam("usrloc", "nat_bflag", 6)
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
#NAT detection
log("######################################### Go to Route 3 for NAT
Detection #####################################");
route(3);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(1);
} else {
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
#$avp(i:27)=check_source_address("0");
#xlog("Check Source Address from Address TABLE : $(avp(i:27))\n");
$avp(s:checksrc) = check_source_address("0");
log("###########################################################################################\n");
xlog("Check Source Address from Address TABLE Where Value 1 is Equal to
True: $(avp(s:checksrc))\n");
log("###########################################################################################\n");
# account only INVITEs
#if (is_method("INVITE")){
# log("############################### INVITE FUNCTION 1
###################################");
# setflag(1); # do accounting
#}
xlog("incoming from $si : $sp \n");
if (check_source_address("0")) {
if (is_method("INVITE")){
if(uri=~"^sip:1234567@"){
rewriteuser("4004"); # my phone DN
log("#################### INVITE FUNCTION 1
####################");
setflag(1); # do accounting
}
}
}
if (!uri==myself)
## replace with following line if multi-domain support is used
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
if(uri==myself)
{
log("########################################### URI == MYSELF
########################################");
if(method=="REGISTER")
{
route(2);
}
append_hf("P-hint: usrloc applied\r\n");
}
# requests for my domain
## uncomment this if you want to enable presence server
## and comment the next 'if' block
## NOTE: uncomment also the definition of route[2] from below
##if( is_method("PUBLISH|SUBSCRIBE"))
## route(2);
if (is_method("PUBLISH"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
if (is_method("REGISTER"))
{
route(2);
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
# do lookup with method filtering
if (!lookup("location","m")) {
switch ($retcode) {
case -1:
log("############################# LOOKUP LOCATION FLAG -1 PASS
#################################");
#ds_select_dst("1","4");
log("############################# DO ACCOUNTING ON RADIUS
######################################");
setflag(2);
log("############################# SEND CALL TO ASTERISK
#######################################");
rewritehostport("11.22.33.45:5060");
#forward();
log("############################# CALL IS GOING IN STATEFULL MANNER
############################");
t_relay();
log("############################# CALL ROUTING TO ROUTE 1
######################################");
route(1);
exit;
case -3:
log("############################ LOOKUP LOCATION FLAG -3 PASS
#################################");
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
log("############################ LOOKUP LOCATION FLAG -2 PASS
#################################");
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
log("############################# LOOKUP LOCATION FLAG 1 PASS
########################################");
route(1);
}
route[1] {
# for INVITEs enable some additional helper routes
#if (is_method("INVITE") && check_source_address("0")) {
if (is_method("INVITE")) {
log("################################ INVITE ROUTE 1 Function
##################################");
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
#ds_select_dst("1","4");
#forward();
}
if (subst_uri('/(sip:.*);nat=yes/\1/')){
log("################################ IF SUBSTR CONTAINS NAT=YES
################################");
setbflag(6);
};
if (isflagset(5)||isbflagset(6)) {
log("################################ CHECK FLAGSET AND
ROUTE TO 4 ###############################");
route(4);
}
if (!t_relay()) {
sl_reply_error();
};
exit;
}
route[2]
{
log("######################################## AAA-REGISTRATION
#######################################");
if (!aaa_www_authorize("11.22.33.44"))
{
www_challenge("11.22.33.44", "1");
return;
# #exit;
}
#else
#{
# t_reply("405","UnAuhorized");
# exit();
#}
if(isflagset(5))
{
log("################################### IF FLAG SET IS 5
##################################");
# set branch flag -- when someone will call this user
# the INVITE will have branch flag 6 set after
lookup("location")
setbflag(6);
# if you want OPTIONS natpings uncomment next
# setbflag(7);
}
if (!save("location"))
sl_reply_error();
exit;
}
route[3]
{
log("################################ FUNCTION ROUTE 3 NAT
DETECTION ################################");
force_rport();
if (nat_uac_test("19")) {
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
};
setflag(5);
};
}
route[4]
{
log("################################ FUNCTION ROUTE 4 RTP PROXY
################################");
if (is_method("BYE")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
force_rtp_proxy();
#t_on_failure("2");
t_on_failure("3");
};
if (isflagset(5))
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
#t_on_reply("1");
t_on_reply("3");
}
branch_route[2] {
xlog("new branch at $ru\n");
}
onreply_route[2] {
xlog("incoming reply\n");
}
failure_route[1] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## # do not set the missed call flag again
## t_relay();
##}
}
failure_route[3] {
log("################################ FAILURE ROUTE 3 FUNCTION
################################");
if (isbflagset(6) || isflagset(5)) {
unforce_rtp_proxy();
}
}
onreply_route[3] {
log("################################ ONREPLY ROUTE 3 FUNCTION
################################");
if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") {
force_rtp_proxy();
}
search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes');
if (isbflagset(6)) {
fix_nated_contact();
}
exit;
}
Kindly help me out with this problem, in which other section Natting is
required?(or am I missing something in the configuration?) Please assist me
on it.
--
Regards,
Ahmed Munir
_______________________________________________
Users mailing list
Users at lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20100429/84192485/attachment-0001.htm
More information about the Users
mailing list