[OpenSIPS-Users] Info about rtpproxy and opensips working together on different hosts...

[Bogdan-Andrei Iancu]

Hi Roberto,

start RTPproxy with debugs (in foreground) and check for errors - a 0 
port returned means some error on the rtpproxy side.

Regards,
Bogdan

Roberto Ovani wrote:
> Hi !
> I logged with xlog to answer to Bogdan's question :
> this is what I can read in syslog:
> Scenario : 1000 at mydomain is trying to call 1002 at mydomain :
>
> /*Apr 20 11:44:58 opensips opensips[32557]: >>>>>>>>>>>>>>>>>>>>>>> 
> entering route 6 !!!!! <<<<<<<<<<<<<<<
> Apr 20 11:44:58 opensips opensips[32557]: Method : INVITE ---> 
> forceRTPproxy !!!!*/
> Apr 20 11:44:58 opensips opensips[32558]: fix nated contact
> */Apr 20 11:44:59 opensips opensips[32557]: 
> ERROR:nathelper:force_rtp_proxy_body: incorrect port 0 in reply from 
> rtp proxy
> Apr 20 11:44:59 opensips opensips[32557]: new branch at 
> sip:1002 at 151.16.40.175:58056;rinstance=0b5635955004021c/*
> Apr 20 11:44:59 opensips opensips[32556]: incoming reply
> Apr 20 11:44:59 opensips opensips[32556]: Qui siamo nella route 
> onreply : onreply_route[2]: ovvero nella gestione delle risposte 200OK 
> o 183........... !!!!! <<<<<<<<<<
> Apr 20 11:45:00 opensips opensips[32558]: incoming reply
> Apr 20 11:45:00 opensips opensips[32558]: Qui siamo nella route 
> onreply : onreply_route[2]: ovvero nella gestione delle risposte 200OK 
> o 183........... !!!!! <<<<<<<<<<
>
> I'm a newbie in opensips, so I sometimes lose control of it :(
> any other advice ?
>
> thanks in advance
> Roberto
>
>
>
> Il martedì 20/04/10 11.29, Bogdan-Andrei Iancu ha scritto:
>> Hi Roberto,
>>
>> does the error pop up when doing force_rtp_proxy() for the INVITE 
>> request or for the 200 OK INVITE ?
>>
>> Regards,
>> Bogdan
>>
>> Roberto Ovani wrote:
>>   
>>> Hello,
>>> i have :
>>>
>>> 1) one host with opensips installed (opensips.roberto.com) on one 
>>> public ip
>>> 2) one host with rtpproxy installed (rtpproxy.roberto.com) on another 
>>> public ip
>>>
>>> 3) two clients into another LANs...
>>>
>>> I forwarded the ports for making all work :
>>> 1) opensips : 5060 udp (for the registering in sip)
>>> 2) rtpproxy : 7890 udp (the socket), and the range 10,000 : 20,000 (i 
>>> compiled with this range)
>>>
>>> when on sip client wants to call another sip clients (they're both 
>>> behind different nats and into different lans), then opensips must 
>>> rewrite the sdp so that the rtp flow goes through rtpproxy: in this 
>>> moment, opensips logs tell me :
>>> /nathelper:force_rtp_proxy_body: incorrect port 0 in reply from rtp proxy
>>>
>>> /and the communication cannot happen correctly...... any advice ? what 
>>> shoul I have to check ?
>>>
>>> Roberto
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>   
>>>     
>>   
>


-- 
Bogdan-Andrei Iancu
www.voice-system.ro