[OpenSIPS-Users] 404 automatic failover

[Brett Nemeroff]

Sure thing. Glad you got it working.

On Mon, Oct 12, 2009 at 11:53 AM, Pacho Baratta [fabbricadigitale] <
P.Baratta at fabbricadigitale.it> wrote:

>  Brett,
>
> the problem was with 400… it was not 404 as I believedL
>
>
>
> thanks so much for the support, as it works fine now
>
>
>
> fabbrica*digitale* srl
>
> *Pacho Baratta | Senior Systems Engineer *
>
> Tecnhology Engineering
>
> -----------------------------
>
> Via A.Volta, 3 - 26041 – Casalmaggiore - CR
>
> Phone +39 0375 284600
>
> Fax +39 02 57760002
>
> *mailto:p.baratta at fabbricadigitale.it <p.baratta at fabbricadigitale.it>
> *www.fabbricadigitale.it* *
>
>
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Brett Nemeroff
> *Sent:* lunedì 12 ottobre 2009 18:41
> *To:* users at lists.opensips.org
>
> *Subject:* Re: [OpenSIPS-Users] 404 automatic failover
>
>
>
> Please keep this discussion on the list. Other's may benefit from your
> questions!!
>
>
>
>
>
> How do you know it isn't called.. stick an xlog in there:
>
> failure_route[1] {
>
>         xlog("L_INFO","****** In failure route 1!!\n");
>
>         if (t_was_cancelled()) {
>
>                 exit;
>
>         }
>
>
>
> Also, be sure to add the 404 check in:
>
> if (t_check_status("400|486|408|404")) {
>
>
>
> On Mon, Oct 12, 2009 at 11:36 AM, Pacho Baratta [fabbricadigitale] <
> P.Baratta at fabbricadigitale.it> wrote:
>
> I don’t understand what you mean.
>
> The
>
> if(uri=~"^sip:*@*") {
>
> rewritehostport("172.30.1.110:5060");
>
>  }
>
>
>
> Seems to work fine, as I get calls on existing numbers.
>
>
>
> My failure route is like this:
>
>
>
> failure_route[1] {
>
>         if (t_was_cancelled()) {
>
>                 exit;
>
>         }
>
>
>
>         # uncomment the following lines if you want to redirect the failed
>
>         # calls to a different new destination
>
> if (t_check_status("400|486|408")) {
>
>                 sethostport("172.30.7.54:5060");
>
> #               rewritehostport("172.30.7.54:5060");
>
>         ##      # do not set the missed call flag again
>
>  xlog("L_ERR",
>
>                 "404 calls are redirected");
>
>
>
>                 t_relay();
>
>         }
>
>
>
> But it looks like it is not called
>
>
>
>
>
> fabbrica*digitale* srl
>
> *Pacho Baratta | Senior Systems Engineer *
>
> Tecnhology Engineering
>
> -----------------------------
>
> Via A.Volta, 3 - 26041 – Casalmaggiore - CR
>
> Phone +39 0375 284600
>
> Fax +39 02 57760002
>
> *mailto:p.baratta at fabbricadigitale.it <p.baratta at fabbricadigitale.it>
> *www.fabbricadigitale.it* *
>
>
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Brett Nemeroff
> *Sent:* lunedì 12 ottobre 2009 18:21
> *To:* OpenSIPS users mailling list
>
>
> *Subject:* Re: [OpenSIPS-Users] 404 automatic failover
>
>
>
> Your config really needs some work. For starters:
>
> if(uri=~"^sip:*@*") {
>
> rewritehostport("172.30.1.110:5060");
>
>  }
>
> (ie: if uri is properly formated then...) Of course, there are other cases
> you might be checking for here, but I don't think that was the intention..
>
>
>
>
>
> So it might as well just be:
>
> rewritehostport("172.30.1.110:5060");
>
> (without the IF statement around it).
>
>
>
> Next, you do a whole bunch of stuff after that rewrite that might end up
> rewriting the message again.. do you really want that? What I'm suggesting
> is that your order (where you stuck the rewrite) is off.
>
>
>
> Lastly, in the failure route, you should add a check for the 404 in it:
>
> if (t_check_status("400|486|408|404")) {
>
>
>
> See where that gets you..
>
> -Brett
>
>
>
> On Mon, Oct 12, 2009 at 11:11 AM, Pacho Baratta [fabbricadigitale] <
> P.Baratta at fabbricadigitale.it> wrote:
>
> If a place a call to a number that does not exist, the gateway returns a
> 404.
>
> I want to redirect this call to a different gateway
>
>
>
> fabbrica*digitale* srl
>
> *Pacho Baratta | Senior Systems Engineer *
>
> Tecnhology Engineering
>
> -----------------------------
>
> Via A.Volta, 3 - 26041 – Casalmaggiore - CR
>
> Phone +39 0375 284600
>
> Fax +39 02 57760002
>
> *mailto:p.baratta at fabbricadigitale.it <p.baratta at fabbricadigitale.it>
> *www.fabbricadigitale.it* *
>
>
>
> *From:* users-bounces at lists.opensips.org [mailto:
> users-bounces at lists.opensips.org] *On Behalf Of *Brett Nemeroff
> *Sent:* lunedì 12 ottobre 2009 18:06
> *To:* Pacho Baratta [fabbricadigitale]
> *Cc:* OpenSIPS users mailling list
>
>
> *Subject:* Re: [OpenSIPS-Users] 404 automatic failover
>
>
>
> Pacho,
>
> This is better than before. But you haven't mentioned what the problem is
> this time.
>
>
>
> On Mon, Oct 12, 2009 at 11:03 AM, Pacho Baratta [fabbricadigitale] <
> P.Baratta at fabbricadigitale.it> wrote:
>
> As I said, I’m really a newbie. So I tried to modify the default routing
> logic, but no success.
>
> Can you please tell me what’s wrong with this?
>
> Thanks all, pacho
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20091012/bb69ac54/attachment.htm