[OpenSIPS-Users] Rebooting a Linksys through OpenSIPS
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Mon May 18 10:41:42 CEST 2009
OK, done - see http://www.opensips.org/Resources/DocsTools#toc11
Regards,
Bogdan
Chris Maciejewski wrote:
> Hi Bogdan,
>
> Yes, sure. No problem at all.
>
> Best regards,
> Chris
>
>
> 2009/5/14 Bogdan-Andrei Iancu <bogdan at voice-system.ro>:
>
>> Hi Chris,
>>
>> Can I link your tool from the opensips tools web page -
>> http://www.opensips.org/Resources/DocsTools ?
>>
>> Thanks and regards,
>> Bogdan
>>
>> Chris Maciejewski wrote:
>>
>>> Hi,
>>>
>>> You can find a PhpSIP UA I wrote some time ago, which can be used to
>>> send a NOTIFY to resync/reboot Linksys phone. It is far from being a
>>> complete SIP UA (no transactions matching etc.), but I am using it all
>>> the time to send NOTIFY, or INVITE, REFER for Click 2 Call from my web
>>> application (PHP based) and it works well.
>>>
>>> http://wima.co.uk/PhpSIP/
>>>
>>> Also you will find two functions auth() and authWWW() which calculate
>>> Digest and WWW responses.
>>>
>>> Regards,
>>> Chris
>>>
>>>
>>> 2009/5/13 Bogdan-Andrei Iancu <bogdan at voice-system.ro>:
>>>
>>>
>>>> Matti,
>>>>
>>>> you should read more about digest auth in the RFC -
>>>> http://www.ietf.org/rfc/rfc2617.txt
>>>>
>>>> Regards,
>>>> Bogdan
>>>>
>>>> Matti Zemack wrote:
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> Thanks again Bogdan. Tried that. Still no go. Suppose I'll try to get
>>>>> some help from Linksys people.
>>>>>
>>>>> /Matti
>>>>>
>>>>> -----Original Message-----
>>>>> From: Bogdan-Andrei Iancu [mailto:bogdan at voice-system.ro]
>>>>> Sent: den 13 maj 2009 17:46
>>>>> To: Matti Zemack
>>>>> Cc: Sergio Gutierrez; users at lists.opensips.org
>>>>> Subject: Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS
>>>>>
>>>>> With qop, do :
>>>>>
>>>>> response=MD5( HA1 ":" nonce ":" nc ":" cnonce ":" qop ":" HA2)
>>>>>
>>>>> Regards,
>>>>> Bogdan
>>>>>
>>>>> Matti Zemack wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Hi again,
>>>>>>
>>>>>> Yes, we tried almost that (as we don't receive a cnonce nor
>>>>>> nonce-count in the 401 from Linksys, we only get the qop="auth" which
>>>>>> actually by the RFC forces us to use your suggested longer response
>>>>>> code.).
>>>>>>
>>>>>> We did try with an empty cnonce and nonce count= "nc=00000001" (or
>>>>>> empty).
>>>>>>
>>>>>> Without success.
>>>>>>
>>>>>> /Matti
>>>>>>
>>>>>> *From:* Sergio Gutierrez [mailto:saguti at gmail.com]
>>>>>> *Sent:* den 13 maj 2009 17:16
>>>>>> *To:* Bogdan-Andrei Iancu
>>>>>> *Cc:* Matti Zemack; users at lists.opensips.org
>>>>>> *Subject:* Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS
>>>>>>
>>>>>> Hi Bogdan.
>>>>>>
>>>>>> For our particular need, it looks like we need to send the response in
>>>>>> a more complex way:
>>>>>>
>>>>>> response = md5(HA1:nonce:nonceCount:clientNonce:qop:ha2)
>>>>>>
>>>>>> Could you give us any hint about nonceCount and clientNonce
>>>>>> parameters? Documentation is not very clear.
>>>>>>
>>>>>> Thanks and regards.
>>>>>>
>>>>>> Sergio.
>>>>>>
>>>>>> On Wed, May 13, 2009 at 9:38 AM, Bogdan-Andrei Iancu
>>>>>> <bogdan at voice-system.ro <mailto:bogdan at voice-system.ro>> wrote:
>>>>>>
>>>>>> Hi Matti,
>>>>>>
>>>>>> Actually it is SIP auth, so digest auth (RFC 2617)
>>>>>> Shortly:
>>>>>> HA1=MD5( auth_usernam ":" realm ":" passwd )
>>>>>>
>>>>>> HA2=MD5( method ":" ruri )
>>>>>>
>>>>>> response=MD5( HA1 ":" nonce ":" HA2)
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Bogdan
>>>>>>
>>>>>> Matti Zemack wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Hi again,
>>>>>>>
>>>>>>> First of all; Thanks Bogdan!
>>>>>>> Your tip works (theoretically) fine.
>>>>>>> But, I just can't find a way of calculating the PAP2s authentication.
>>>>>>> Not much seems to be documented.
>>>>>>> Does anyone have any hints regarding Linksys authentication (for a
>>>>>>> reboot at least).
>>>>>>>
>>>>>>> I've tried calculating using
>>>>>>> http://en.wikipedia.org/wiki/Digest_access_authentication , and
>>>>>>> basically sticking to RFC2069, as I don't believe I have have
>>>>>>> nonceCount
>>>>>>> & clientNonce.
>>>>>>> By the way; how should the digestURI look? (I've tried the
>>>>>>> combinations
>>>>>>> that came to my mind...)
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Matti Zemack, Stockholm, Sweden
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Bogdan-Andrei Iancu [mailto:bogdan at voice-system.ro
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> <mailto:bogdan at voice-system.ro>]
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Sent: den 12 maj 2009 10:33
>>>>>>> To: Matti Zemack
>>>>>>> Cc: users at lists.opensips.org <mailto:users at lists.opensips.org>
>>>>>>> Subject: Re: [OpenSIPS-Users] Rebooting a Linksys through OpenSIPS
>>>>>>>
>>>>>>> Hi Matti,
>>>>>>>
>>>>>>> Well, it should be possible - you do a 2 steps interaction with the
>>>>>>> Linkys :
>>>>>>> - first send the NOTIFY via the t_uac_dlg MI command and get from the
>>>>>>> result the auth challenge (in the MI command response you do have
>>>>>>> access
>>>>>>>
>>>>>>> to the SIP reply)
>>>>>>> - generate a new NOTIFY request including the Authorize header
>>>>>>> calculated based on the received challenge.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Bogdan
>>>>>>>
>>>>>>> Matti Zemack wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> I'm still dipping my toes in deep waters with OpenSips 1.5...
>>>>>>>>
>>>>>>>> And I've come across a small problem. I would like to reboot Linksys
>>>>>>>> ATA (PAP2 etc...) using OpenSIPS.
>>>>>>>>
>>>>>>>> Can this maybe be done?
>>>>>>>>
>>>>>>>> Basically I use XML-RPC FIFO to send the SIP command. The problem is
>>>>>>>> that Linksys replies with 401 challenge. Can I, or is it at all
>>>>>>>> possible to reply to this challenge using OpenSIPS?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Sergio Gutiérrez
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>>
>
>
More information about the Users
mailing list