[OpenSIPS-Users] my problems getting dialplan to work
Bradley, Todd
todd.bradley at Polycom.com
Wed Jun 17 17:10:10 CEST 2009
Has anyone else seen dp_translate not actually translate according to
its rules? Are other people using the dialplan module successfully?
Todd.
> -----Original Message-----
> From: users-bounces at lists.opensips.org
> [mailto:users-bounces at lists.opensips.org] On Behalf Of Bradley, Todd
> Sent: Tuesday, June 16, 2009 11:35 AM
> To: users at lists.opensips.org
> Subject: Re: [OpenSIPS-Users] my problems getting dialplan to work
>
> I'm running on GNU/Linux FC7. I know that's pretty old, but
> it's updated with all the latest package updates. I built
> opensips-1.5.1-tls from source.
>
>
> Todd.
>
>
> > -----Original Message-----
> > From: users-bounces at lists.opensips.org
> > [mailto:users-bounces at lists.opensips.org] On Behalf Of
> Bogdan-Andrei
> > Iancu
> > Sent: Tuesday, June 16, 2009 11:15 AM
> > To: Bradley, Todd
> > Cc: users at lists.opensips.org
> > Subject: Re: [OpenSIPS-Users] my problems getting dialplan to work
> >
> > Todd, this sounds like twilightzone :)...what OS are you using ?
> >
> > regards,
> > Bogdan
> >
> > Bradley, Todd wrote:
> > > This is really baffling. I updated my DB table to look
> > nearly exactly
> > > like yours and even changed my script to look almost exactly like
> > > yours, and still it doesn't work.
> > >
> > > Here's the output that was logged:
> > >
> > > Jun 16 10:35:12 [27383] DBG:dialplan:dp_get_ivalue: integer
> > value Jun
> > > 16 10:35:12 [27383] DBG:dialplan:dp_translate_f: dpid is 2 Jun 16
> > > 10:35:12 [27383] DBG:dialplan:dp_get_svalue: searching 78 Jun 16
> > > 10:35:12 [27383] DBG:dialplan:dp_translate_f: input is
> > sip:061111 Jun
> > > 16 10:35:12 [27383] DBG:dialplan:translate: regex operator
> > testing Jun
> > > 16 10:35:12 [27383] DBG:dialplan:test_match: test string
> sip:061111
> > > against a pattern (sip:06.+) Jun 16 10:35:12 [27383]
> > > DBG:dialplan:test_match: test_match:[0]
> > > sip:061111
> > > Jun 16 10:35:12 [27383] DBG:dialplan:test_match: test_match:[1]
> > > sip:061111
> > > Jun 16 10:35:12 [27383] DBG:dialplan:translate: found a
> > matching rule
> > > 0xb615a1f0: pr 0, match_exp (sip:06.+) Jun 16 10:35:12 [27383]
> > > DBG:dialplan:translate: the rule's attrs are 0 Jun 16
> > 10:35:12 [27383]
> > > DBG:dialplan:translate: the copied attributes
> > > are: 0
> > > Jun 16 10:35:12 [27383] DBG:dialplan:test_match: test string
> > > sip:061111 against a pattern (sip:06.+) Jun 16 10:35:12 [27383]
> > > DBG:dialplan:test_match: test_match:[0]
> > > sip:061111
> > > Jun 16 10:35:12 [27383] DBG:dialplan:test_match: test_match:[1]
> > > sip:061111
> > > Jun 16 10:35:12 [27383] DBG:dialplan:dp_translate_f: input
> > sip:061111
> > > with dpid 2 => output sip:061111 The variable that went in was
> > > sip:061111 The variable that came out was sip:061111
> > >
> > >
> > > And here is the relevant part of my route script:
> > >
> > > $var(x) = "sip:061111";
> > > dp_translate("2", "$var(x)/$var(tmp)");
> > > xlog("The variable that went in was $var(x)\n");
> > > xlog("The variable that came out was
> $var(tmp)\n");
> > >
> > >
> > > And here is the data from my dialplan table:
> > >
> > > mysql> select * from dialplan;
> > >
> >
> +----+------+----+----------+------------+-----------+------------+---
> > >
> >
> +----+------+----+----------+------------+-----------+------------+--
> > > -----------+-------+
> > > | id | dpid | pr | match_op | match_exp | match_len |
> subst_exp |
> > > repl_exp | attrs |
> > >
> >
> +----+------+----+----------+------------+-----------+------------+---
> > >
> >
> +----+------+----+----------+------------+-----------+------------+--
> > > -----------+-------+
> > > | 7 | 2 | 0 | 1 | (sip:06.+) | 0 |
> (sip:06.+) |
> > > \1 at 10.47.19.24 | 0 |
> > >
> >
> +----+------+----+----------+------------+-----------+------------+---
> > >
> >
> +----+------+----+----------+------------+-----------+------------+--
> > > -----------+-------+
> > > 1 row in set (0.00 sec)
> > >
> > >
> > >
> > > Any ideas?
> > >
> > >
> > > Cheers,
> > > Todd.
> > >
> > >
> > >
> > >> -----Original Message-----
> > >> From: users-bounces at lists.opensips.org
> > >> [mailto:users-bounces at lists.opensips.org] On Behalf Of
> > Bogdan-Andrei
> > >> Iancu
> > >> Sent: Tuesday, June 16, 2009 10:14 AM
> > >> To: Bradley, Todd
> > >> Cc: users at lists.opensips.org
> > >> Subject: Re: [OpenSIPS-Users] my problems getting
> dialplan to work
> > >>
> > >> Hi Todd,
> > >>
> > >> The attr column is not user in t matching / replacement
> > process - it
> > >> is a simply opaque string (with no special
> > >> meaning) that will be automatically pushed into script
> > (via some PV)
> > >> if the rule matches.
> > >>
> > >> If this still does not work for you, please post the
> opensips log
> > >> (like last one).
> > >>
> > >> Regards,
> > >> Bogdan
> > >>
> > >> Bradley, Todd wrote:
> > >>
> > >>> Thanks, Bogdan. At first I definitely had my repl_exp
> expression
> > >>> wrong due to the backslash being interpreted wrong. But I
> > >>>
> > >> fixed that
> > >>
> > >>> and I think it's right now. Here's what I get:
> > >>>
> > >>> mysql> select * from dialplan;
> > >>>
> > >>>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > +----+------+----+----------+------------+-----------+------------+-
> > >>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > >>> -----------+-------+
> > >>> | id | dpid | pr | match_op | match_exp | match_len |
> > subst_exp |
> > >>> repl_exp | attrs |
> > >>>
> > >>>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > +----+------+----+----------+------------+-----------+------------+-
> > >>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > >>> -----------+-------+
> > >>> | 7 | 2 | 2 | 1 | (sip:06.+) | 0 |
> > (sip:06.+) |
> > >>> \1 at 10.47.19.24 | |
> > >>>
> > >>>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > +----+------+----+----------+------------+-----------+------------+-
> > >>
> > >>
> >
> +----+------+----+----------+------------+-----------+------------+--
> > >>
> > >>> -----------+-------+
> > >>> 1 row in set (0.00 sec)
> > >>>
> > >>>
> > >>> The only possibly relevant difference I see is that you
> > have a 0 in
> > >>> your attrs column, where I have a blank. Otherwise, it
> > looks like
> > >>> everything's fine, doesn't it? I couldn't figure out what
> > >>>
> > >> the attrs
> > >>
> > >>> column was for, so I didn't insert anything into it.
> > >>>
> > >> According to the
> > >>
> > >>> docs, it's a "General attributes string to be returned in
> > >>>
> > >> case of rule
> > >>
> > >>> matching" and it's a string. Could you help explain what
> > it's for?
> > >>>
> > >>>
> > >>> Cheers,
> > >>> Todd.
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: users-bounces at lists.opensips.org
> > >>>> [mailto:users-bounces at lists.opensips.org] On Behalf Of
> > >>>>
> > >> Bogdan-Andrei
> > >>
> > >>>> Iancu
> > >>>> Sent: Monday, June 15, 2009 6:28 PM
> > >>>> To: Bradley, Todd
> > >>>> Cc: users at lists.opensips.org
> > >>>> Subject: Re: [OpenSIPS-Users] my problems getting
> > dialplan to work
> > >>>>
> > >>>> Hi Bradley,
> > >>>>
> > >>>> I re-made your case with:
> > >>>>
> > >>>> mysql> select * from dialplan;
> > >>>> +----+------+----+----------+------------+-----------+--------
> > >>>> ----+----------------+-------+
> > >>>> | id | dpid | pr | match_op | match_exp | match_len |
> > subst_exp |
> > >>>> repl_exp | attrs |
> > >>>> +----+------+----+----------+------------+-----------+--------
> > >>>> ----+----------------+-------+
> > >>>> | 1 | 1 | 0 | 1 | (sip:06.+) | 0 |
> > >>>>
> > >> (sip:06.+) |
> > >>
> > >>>> \1 at 10.47.19.24 | 0 |
> > >>>> +----+------+----+----------+------------+-----------+--------
> > >>>> ----+----------------+-------+
> > >>>> 1 row in set (0.00 sec)
> > >>>>
> > >>>> and in script:
> > >>>>
> > >>>> $var(x) = "sip:061111";
> > >>>> dp_translate("1", "$var(x)/$var(tmp)");
> > >>>> xlog("-------------$var(tmp)\n");
> > >>>>
> > >>>>
> > >>>> The output was:
> > >>>>
> > >>>> Jun 16 03:22:34 [7921] DBG:dialplan:dp_get_ivalue: integer
> > >>>>
> > >> value Jun
> > >>
> > >>>> 16 03:22:34 [7921] DBG:dialplan:dp_translate_f:
> > >>>> dpid is 1 Jun 16 03:22:34 [7921] DBG:dialplan:dp_get_svalue:
> > >>>> searching 78 Jun 16 03:22:34 [7921]
> > >>>> DBG:dialplan:dp_translate_f: input is sip:061111 Jun 16
> > >>>> 03:22:34 [7921] DBG:dialplan:translate: regex operator
> > >>>>
> > >> testing Jun 16
> > >>
> > >>>> 03:22:34 [7921] DBG:dialplan:test_match: test string
> sip:061111
> > >>>> against a pattern (sip:06.+) Jun 16
> > >>>> 03:22:34 [7921] DBG:dialplan:test_match: test_match:[0]
> > >>>> sip:061111 Jun 16 03:22:34 [7921] DBG:dialplan:test_match:
> > >>>> test_match:[1] sip:061111 Jun 16 03:22:34 [7921]
> > >>>> DBG:dialplan:translate: found a matching rule
> > >>>> 0xb56744c0: pr 0, match_exp (sip:06.+) Jun 16 03:22:34 [7921]
> > >>>> DBG:dialplan:test_match: test string
> > >>>> sip:061111 against a pattern (sip:06.+) Jun 16 03:22:34 [7921]
> > >>>> DBG:dialplan:test_match: test_match:[0] sip:061111 Jun
> > >>>> 16 03:22:34 [7921] DBG:dialplan:test_match: test_match:[1]
> > >>>> sip:061111 Jun 16 03:22:34 [7921]
> > >>>> DBG:dialplan:dp_translate_f: input sip:061111 with dpid 1
> > >>>>
> > >> => output
> > >>
> > >>>> sip:061111 at 10.47.19.24
> > >>>> -------------sip:061111 at 10.47.19.24
> > >>>>
> > >>>> Which looks pretty ok ...
> > >>>>
> > >>>> Maybe there is something something in the correct data
> in DB.....
> > >>>>
> > >>>> Regards,
> > >>>> Bogdan
> > >>>>
> > >>>>
> > >>>> Bradley, Todd wrote:
> > >>>>
> > >>>>
> > >>>>> Hi, I'm new to openSIPS and am trying to set it up with the
> > >>>>>
> > >>>>>
> > >>>> dialplan
> > >>>>
> > >>>>
> > >>>>> module, but I've had a couple problems I can't figure out.
> > >>>>>
> > >>>>> The first problem is related to how dp_translate is
> > doing regexp
> > >>>>> replacements. I have code like this in my route method:
> > >>>>>
> > >>>>> if (is_method("INVITE")) {
> > >>>>> xlog("To user is: $tu\n");
> > >>>>> xlog("ruri.user is: $ruri.user\n");
> > >>>>> xlog("avp(s:dest) is: $avp(s:dest)\n");
> > >>>>> dp_translate("1", "$tu/$var(tmp)");
> > >>>>> xlog("The variable that came out was $var(tmp)\n");
> > >>>>> setflag(1); # do accounting
> > >>>>> }
> > >>>>>
> > >>>>> And my dialplan DB table has this row for dpid 1:
> > >>>>> match_exp=(^06.+)
> > >>>>> subst_exp=(^06.+)
> > >>>>> repl_exp=\1 at 10.47.19.24
> > >>>>>
> > >>>>> When I send in a SIP INVITE that is to "sip:061111", I
> > expect the
> > >>>>> dp_translate to convert this to "sip:061111 at 10.47.19.24".
> > >>>>>
> > >>>>>
> > >>>> But I just
> > >>>>
> > >>>>
> > >>>>> get "sip:061111" back. Here's the output:
> > >>>>>
> > >>>>> To user is: sip:061111
> > >>>>> ruri.user is: <null>
> > >>>>> avp(s:dest) is: <null>
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:dp_get_ivalue: integer
> > >>>>>
> > >>>>>
> > >>>> value Jun
> > >>>>
> > >>>>
> > >>>>> 12 13:48:55 [29901] DBG:dialplan:dp_translate_f: dpid
> > is 2 Jun 12
> > >>>>> 13:48:55 [29901] DBG:dialplan:dp_get_svalue:
> searching 22 Jun 12
> > >>>>> 13:48:55 [29901] DBG:dialplan:dp_translate_f: input is
> > sip:061111
> > >>>>>
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:translate: regex
> > >>>>>
> > >>>>>
> > >>>> operator testing
> > >>>>
> > >>>>
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:test_match: test string
> > >>>>> sip:061111 against a pattern (sip:06.+) Jun 12
> 13:48:55 [29901]
> > >>>>> DBG:dialplan:test_match: test_match:[0]
> > >>>>> sip:061111
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:test_match:
> test_match:[1]
> > >>>>> sip:061111
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:translate: found a
> > >>>>>
> > >>>>>
> > >>>> matching rule
> > >>>>
> > >>>>
> > >>>>> 0xb610c1f0: pr 2, match_exp (sip:06.+) Jun 12 13:48:55 [29901]
> > >>>>> DBG:dialplan:test_match: test string sip:061111 against
> > a pattern
> > >>>>> (sip:06.+) Jun 12 13:48:55 [29901] DBG:dialplan:test_match:
> > >>>>> test_match:[0]
> > >>>>> sip:061111
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:test_match:
> test_match:[1]
> > >>>>> sip:061111
> > >>>>> Jun 12 13:48:55 [29901] DBG:dialplan:dp_translate_f: input
> > >>>>>
> > >>>>>
> > >>>> sip:061111
> > >>>>
> > >>>>
> > >>>>> with dpid 2 => output sip:061111 The variable that
> came out was
> > >>>>> sip:061111
> > >>>>>
> > >>>>> So it looks like \1 is indeed replaced with the part that
> > >>>>>
> > >>>>>
> > >>>> matches the
> > >>>>
> > >>>>
> > >>>>> regexp, but the rest of my replacement string (the
> > "@10.47.19.24"
> > >>>>> part) is ignored. Why is that? What am I doing wrong?
> > >>>>>
> > >>>>> And my second question is this: Once I fix my first
> > mistake, what
> > >>>>> should I do to make use of this? The behavior I want is
> > >>>>>
> > >>>>>
> > >>>> that when the
> > >>>>
> > >>>>
> > >>>>> proxy gets an INVITE to 061111, it fills in the rest of
> > >>>>>
> > >> the address
> > >>
> > >>>>> and then routes it along. In this case, it should pass it
> > >>>>>
> > >> along to
> > >>
> > >>>>> 061111 at 10.47.19.24.
> > >>>>>
> > >>>>> Here's where my newness to openSIPS is coming to light, I
> > >>>>>
> > >>>>>
> > >>>> think. When
> > >>>>
> > >>>>
> > >>>>> I read the documentation for the dialplan module
> > >>>>>
> > >>>>>
> > >>
> (http://www.opensips.org/html/docs/modules/1.5.x/dialplan.html), it
> > >>
> > >>>>> has an example that leads me to believe I should be able to
> > >>>>>
> > >>>>>
> > >>>> just do this:
> > >>>>
> > >>>>
> > >>>>>
> > >>>>> dp_translate("2", "$avp(s:dest)/$avp(s:dest)");
> > >>>>>
> > >>>>> But $avp(s:dest) is null, as you can see from the output
> > >>>>>
> > >>>>>
> > >>>> above. What
> > >>>>
> > >>>>
> > >>>>> SHOULD I have in my route script to do what I'm trying to do?
> > >>>>>
> > >>>>>
> > >>>>> Thanks,
> > >>>>> Todd.
> > >>>>>
> > >>>>> ps. I originally posted this question last week to the
> > >>>>>
> > >>>>>
> > >>>> OpenSIPS web
> > >>>>
> > >>>>
> > >>>>> forum, but then realized that nobody really reads the
> > >>>>>
> > >> forum and all
> > >>
> > >>>>> the action is over here on the users email list. So
> > >>>>>
> > >> sorry for the
> > >>
> > >>>>> sort-of duplication.
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>>
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
>
> _______________________________________________
> Users mailing list
> Users at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
More information about the Users
mailing list