[OpenSIPS-Users] CDRTool does not identify by IP origin from OpenSips

[Alberto Listas]

I am storing the user at domain for the client in the tag column of the trusted table, so when I 
authorize the IP I place the user at domain information in the variables. Don't know if I am doing
all the correct settings because I am a real newbie. But CDRTool is working perfectly for post paid.
I am having an issue with not decrementing prepaid value and will be posting this in a few minutes, 
but I don't think its related to this IP issue.
Alberto
  ----- Original Message ----- 
  From: Adrian Georgescu 
  To: Alberto Listas 
  Cc: DanB ; users at lists.opensips.org 
  Sent: Thursday, July 23, 2009 7:20 AM
  Subject: Re: [OpenSIPS-Users] CDRTool does not identify by IP origin from OpenSips


  CDRTool was designed to rate while using user at domain format for SIP URIs. IPs/hostnames only without username are not fully supported, something somewhere will likely break as you have already noticed.


  Adrian


  On Jul 22, 2009, at 7:41 PM, Alberto Listas wrote:


    Hi Dan,

    Thanks for the info, the doc/Rating.txt is very good but
    sometimes you need previous experience to understand
    the details.

    I was already using the param:
        Source-IP=$avp(s:source_ip);
    But I wasn't setting any values so the SourceIP column was blank.
    I added a line to the cfg to set the value:
        $avp(s:source_ip) = $si;

    And now the rating identifies the origin by SourceIP
    when the CallingStationId is in the form 123456 at 1.1.1.1
    (and hence the domain is set to the IP of the source)
    but when CallingStationId is in the form 1.1.1.1 (just the IP)
    the Domain in the info of the call is blank and the rating does not work.

    When the Domain is blank the rating engine use the profile
    "Customer: alice at example.com" from the default Customer
    configuration of CDRTool. I suppose this is because this customer
    has a blank domain field. But this is an error since it should use
    the default profile instead.

    Anyway, Thanks for your help, now it can rate by IP.

    Cheers,

    Alberto

      ----- Original Message -----
      From: DanB
      To: Alberto Listas
      Cc: users at lists.opensips.org
      Sent: Wednesday, July 22, 2009 4:23 AM
      Subject: Re: [OpenSIPS-Users] CDRTool does not identify by IP origin from OpenSips


      Hi Alberto,


      By default CDRTool takes the gateway parameter out of Source IP (nicely explained also in the doc/RATING.TXT) and if you don't modify the defaults, out of radacct.SourceIP column.


      In order to identify the gateway, you need to enforce that SourceIP inside opensips script to whatever IP you want to be used as your gateway.
      Example of params in opensips.cfg:
      modparam("acc", "radius_extra", "       Source-IP=$avp(s:mygtw)")


      Another trick you can use is to write your own radius sql query which places the SourceIP from another radius attribute received.


      Cheers,
      DanB


      On Tue, Jul 21, 2009 at 9:44 PM, Alberto Listas <listas at b2br.net> wrote:

        Hi,

        I am having a difficulty with the rating in CDRTool. When I telnet and give this command:

        ShowPrice From=sip:005521810000 at 10.0.0.4 To=sip:00552181000000 at 10.0.0.1 Gateway=10.0.0.4 Duration=30
        (IPs where changed)

        The rating engine identifies the customer by the gateway and rates correctly.

        When the call comes from the OpenSips it doesn't identify the customer and uses
        the default profile:

        Start time: 2009-07-21 14:55:24 
        Stop time: 2009-07-21 14:55:59
        Method:Invite from : 
        From:5521083200000 at 10.0.0.4
        Domain:10.0.0.4
        To (dialed URI):005521810000 at 10.0.0.4
        Canonical URI: 005521810000 at 10.0.0.1
        Next hop URI:005521810000 at 10.0.0.2
        Destination: BRAZIL CELL (55218)
        Billing Party:5521810000 at 10.0.0.4
        Reseller:

        Duration: 35 s
        App: audio
        Destination: 55218
        Customer: default
        Connect: 0.0000 ......

        Should I set some different variable to FreeRadius for it to identify the GATEWAY?

        Thanks,

        Alberto

        _______________________________________________
        Users mailing list
        Users at lists.opensips.org
        http://lists.opensips.org/cgi-bin/mailman/listinfo/users




    _______________________________________________
    Users mailing list
    Users at lists.opensips.org
    http://lists.opensips.org/cgi-bin/mailman/listinfo/users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.opensips.org/pipermail/users/attachments/20090725/14b0c7c1/attachment.htm