[OpenSIPS-Users] BLF under OpenSIPS tutorial?

[Steven C. Blair]

Also I'm using SIP 3.0.3.x load in case that matters.

-Steve

-----Original Message-----
From: Anca Vamanu [mailto:anca at opensips.org]
Sent: Thursday, January 15, 2009 7:47 AM
To: Yehavi Bourvine
Cc: Steven C. Blair; users
Subject: Re: [OpenSIPS-Users] BLF under OpenSIPS tutorial?

Hi Yehavi,

I have browsed through the OpenSIPS config file and it looks ok.
For the phone, you need to set the thirdPartyName to have BLA working.
I have mentioned in the last e-mail - Subscribe for line-size is not needed.

To check that the messages go as they should please send a message
trace. Include the following events:
- one phone registering( restart it by unplugging it)
- lift the hand set on one phone.

You can use ngrep command: 'ngrep -qt -d any -W byline port 5060'.

regards,
Anca

Yehavi Bourvine wrote:
> There is no proxy between the phones and the OpenSIPS server. As far
> as I understood OpenSIPS is the prensence server in the way I work, or
> maybe I am missing something fundamental...
>
>                            Thanks, __Yehavi:
>
> 2009/1/14 Steven C. Blair <blairs at isc.upenn.edu
> <mailto:blairs at isc.upenn.edu>>
>
>
>
>     Yehavi:
>
>
>
>      In your proxy do you:
>
>
>
>     1)      Simply relay SUBSCRIBE
>
>     2)      Simply relay PUBLISH messages which originate from the
>     presence server
>
>     3)      Simply relay NOTIFY messages?
>
>
>
>      These steps can be refined later but for now I would do each of
>     these as well as replicate REGISTER request for shared lines to
>     the presence server
>
>
>
>     -Steve
>
>     *From:* Yehavi Bourvine [mailto:yehavi.bourvine at gmail.com
>     <mailto:yehavi.bourvine at gmail.com>]
>     *Sent:* Wednesday, January 14, 2009 10:43 AM
>     *To:* Steven C. Blair; anca at opensips.org <mailto:anca at opensips.org>
>
>     *Subject:* Re: [OpenSIPS-Users] BLF under OpenSIPS tutorial?
>
>
>
>
>     Hello Anca & Steven,
>
>
>
>       Since I've tried all the sugestions that the two of you have
>     sent me to no avail, I am appending here the config files which I
>     think are relevant and will be thankfull for your help.
>
>
>
>       But first, to make sure we call the same child with the same
>     name... I have two Ploycom-501 phones, version 3.1.1; Each phone
>     has a line/extension (the top button) and two speed dials
>     (buddies). BLA stands sharing the same line, and BLF is using the
>     buddies to see the buddy's status.
>
>
>
>     on Asterisk BLF works, BLA is cumbersome to do so I didn't try. On
>     OpenSIPS I understand that BLA is working but BLF not... So I am
>     now trying the BLA feature.
>
>
>
>     Hence, I want the two phones to share the same extension number
>     and see the status of each one. Thus, the xxxxxx-settings.cfg is
>     identical for both phones, like:
>
>     <?
>
>     xml version="1.0" encoding="UTF-8" standalone="yes"?>
>
>     <
>
>     reginfo>
>
>     <
>
>     reg reg.1.displayName="80622" reg.1.address="80622"
>     reg.1.label="80622"
>
>     reg.1.type="shared" reg.1.auth.userId="80622"
>
>     reg.1.auth.password="XXXXXX" />
>
>     </
>
>     reginfo>
>
>
>
>     Note: With the above config, when I lift the handset the phone
>     sends SUBSCRIBE for itself with "line-seize". If I add
>     reg.1.thirdPartyName="80622" then it doesn't generate it.
>
>
>
>     I attach as files the local-sip.cfg, local-phone.cfg and OpenSIPS
>     config file.
>
>
>
>                             Thank you in advance! __Yehavi:
>
>
>
>
>