[OpenSIPS-Users] OpenSip SIP, SIP-I e SIP-T

Alex Balashov abalashov at evaristesys.com
Thu Feb 19 20:31:48 CET 2009


Any standard ISUP attribute has a corresponding map into SIP-T.  So, 
yes, any bearer-related information is going to be in there as well.

Brett Nemeroff wrote:

> One question that I'm not sure of.. Are there any extensions in epru
> SIP-T that specify remote interface to use, such as used in
> H.248/Megaco? ie: dial 123 on TCIC 000010012
> -Brett
> 
> 
> On Thu, Feb 19, 2009 at 11:27 AM, Alex Balashov
> <abalashov at evaristesys.com> wrote:
>> That is accurate.
>>
>> Brett Nemeroff wrote:
>>
>>> From what I understand about SIP-T it's SIP + ISUP params in the
>>> message. The required bits such as RURI and SDP all work as expected.
>>>
>>> Group, feel free to correct me there. Depending on your specific setup
>>> and network architecture, it should work. However, you may not be able
>>> to do anything with the ISUP components of the messaging.
>>>
>>> -Brett
>>>
>>>
>>>
>>> On Thu, Feb 19, 2009 at 11:14 AM, Daviramos Roussenq Fortunato
>>> <daviramosrf at gmail.com> wrote:
>>>> Hi Alex.
>>>>
>>>> If a different protocol is not to say that you can connect directly to
>>>> Asterisk and will work, just taking the resources of ISUP?
>>>>
>>>> SIP-T is not talking with SIP protocol are different, after all SIP-T
>>>> carries information that the SIP can not interpret.
>>>>
>>>> The Problem is the following I get a SIP-T trunk and Asterisk to deliver
>>>> precise, how best to do.
>>>>
>>>> 2009/2/19 Alex Balashov <abalashov at evaristesys.com>
>>>>> Not possible, Asterisk doesn't understand SIP-T.
>>>>>
>>>>> What do you mean by that, anyway?  Only a device that supports ISUP
>>>>> interworking will support SIP-T.
>>>>>
>>>>> Secondly, as is often repeated here, SIP-T is a specification for a
>>>>> _PAYLOAD_ - an extension - of SIP.  It is not a different protocol.
>>>>>
>>>>> Daviramos Roussenq Fortunato wrote:
>>>>>
>>>>>> Hi List.
>>>>>>
>>>>>>  I have a trunk SIP-T must deliver it to the Asterisk in SIP. The Opens
>>>>>> is that?
>>>>>> How should be my opensip.cfg?
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at lists.opensips.org
>>>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>> --
>>>>> Alex Balashov
>>>>> Evariste Systems
>>>>> Web    : http://www.evaristesys.com/
>>>>> Tel    : (+1) (678) 954-0670
>>>>> Direct : (+1) (678) 954-0671
>>>>> Mobile : (+1) (678) 237-1775
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at lists.opensips.org
>>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>>
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>> --
>> Alex Balashov
>> Evariste Systems
>> Web    : http://www.evaristesys.com/
>> Tel    : (+1) (678) 954-0670
>> Direct : (+1) (678) 954-0671
>> Mobile : (+1) (678) 237-1775
>>


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775



More information about the Users mailing list