[OpenSIPS-Users] Openser running between 2 networks

[Bogdan-Andrei Iancu]

Hi Robert,

What you are saying is you are using only the public interface as this 
routable and reachable from the private network also. Is this correct?

Regards,
Bogdan

Robert Dyck wrote:
> I also use openser as an outgoing proxy. At first I had the proxy listening on 
> both interfaces and used rtpproxy in bridge mode. I decided that was not 
> necessary. Now on the local phones I use the proxy's public address as the 
> outgoing proxy address. I no longer use rtpproxy in bridge mode. Both the 
> local phones and external phones can connect with the rtpproxy public 
> address.
>
> On Thursday 09 October 2008, Bogdan-Andrei Iancu wrote:
>   
>> Hi,
>>
>> Another option is to use force_send_socket() core function
>> (http://www.opensips.org/pmwiki.php?n=Resources.DocsCoreFcn#toc95).
>>
>> If you receive the message on the private IP and want to send it out on
>> the public one, do force_send_socket(public_IP); before t_relay().
>>
>> Regards,
>> Bogdan
>>
>> Hung Nguyen wrote:
>>     
>>> Hi Bruno Machodo
>>>
>>> 1. With openser, you must add line mhomed = 1 to openser.cfg ==> it
>>> will run on bridge mode
>>> 2. With rtpproxy you must add flag "EI" ==> for calls from public
>>> network to private network and "IE" with calls from private network to
>>> public network.
>>> force_rtp_proxy("EI");
>>>
>>> nguyen,
>>>
>>> On 9/24/08, Bruno Machado <bsmufu at yahoo.com.br> wrote:
>>>       
>>>> Hi fellows.
>>>>
>>>> I've been looking for a solution to solve this problem. The Openser is
>>>> running
>>>> over 2 IPs: private and public. I also have 2 ATAs: one of them has a
>>>> private IP
>>>> and the second has a public. When the session is established, ATA A will
>>>> send
>>>> RTP to the Openser private interface and ATA B will send to its public
>>>> IP. RTPProxy will
>>>> route the "private RTP packets" to "public network" and vice-versa
>>>>
>>>> private                                       public
>>>> ATA A                Openser                ATA B
>>>> ------- INVITE -------> private IP
>>>>                      public IP  ------- INVITE ----->
>>>>
>>>>
>>>> I've implemented a script but it doesn't work like the way described
>>>> above. When Openser receives the INVITE through its private IP, it
>>>> forwards the message to ATA B using the its private IP.
>>>> I saw that RTPProxy has a bridge mode and the Nathelper's function has
>>>> some parameters to handle with it. The SDP's 'c header' is changed
>>>> properly when
>>>> I use them, but the source IP (when Openser sends it to the public ATA)
>>>> remains private (I'm not thinking that 'force_rtp_proxy' will set the
>>>> network layer). In one hand, I already
>>>> have the SDP set properly; but the source address still belonging to the
>>>> private
>>>> network. So, I just have 50% done. I tried to add an argument in
>>>> "t_relay", like "udp:XXX.YYY.WWW.ZZZ:5060", without success.
>>>> I don't know if what I want is possible: this behavior belongs to a "IP
>>>> router", interconnecting 2 different networks. I didn't find anything
>>>> similar to this (maybe I didn't search enough (and I believe that it is
>>>> the only clever thing here until now...)).
>>>> So... Am I getting crazy or it is clearly possible? (perhaps both..)
>>>>
>>>> Regards
>>>> Bruno Machado
>>>>
>>>>
>>>>
>>>>       Novos endereços, o Yahoo! que você conhece. Crie um email novo com
>>>> a sua cara @ymail.com ou @rocketmail.com.
>>>> http://br.new.mail.yahoo.com/addresses
>>>>         
>>> _______________________________________________
>>> Users mailing list
>>> Users at lists.opensips.org
>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>>       
>> _______________________________________________
>> Users mailing list
>> Users at lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>     
>
>
>
>