[OpenSIPS-Users] Problem with force send socket.

[Bogdan-Andrei Iancu]

Hi Ola,

If the VIA is set to the forced outbound interface, are you sure there 
is no routing rules on your system to force outbound messages from .106 
to .101 ?

Regards,
Bogdan

Ola Karlsson wrote:
> Lightning fast Bogdan.. ;-)
>
> I think so.
> #opensips
> Listening on
>              udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 
> <http://127.0.0.1>]:5060
>              udp: 195.x.x.101 [195.x.x.101]:5060
>              udp: 195.x.x.106 [195.x.x.106]:5060
>              udp: 10.x.x.102 [10.x.x.102]:5060
>              tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 
> <http://127.0.0.1>]:5060
>              tcp: 195.x.x.101 [195.x.x.101]:5060
>              tcp: 195.x.x.106 [195.x.x.106]:5060
>              tcp: 10.x.x.102 [10.x.x.102]:5060
>
> #netstat -lut | grep sip
> tcp        0      0 10.100.100.102:sip      *:*                     
> LISTEN    
> tcp        0      0 195.x.x.106:sip     *:*                     
> LISTEN    
> tcp        0      0 195.x.x.101:sip     *:*                     
> LISTEN    
> tcp        0      0 localhost:sip           *:*                     
> LISTEN    
> udp        0      0 10.x.x.102:sip      
> *:*                               
> udp        0      0 195.x.x.106:sip     
> *:*                               
> udp        0      0 195.x.x.101:sip     
> *:*                               
> udp        0      0 localhost:sip           
> *:*                               
>
> /Ola
>
> On Tue, Nov 11, 2008 at 7:37 PM, Bogdan-Andrei Iancu 
> <bogdan at voice-system.ro <mailto:bogdan at voice-system.ro>> wrote:
>
>     Hi Ola,
>
>     Is your opensips listening on udp:195.x.x.106:5060 ?
>
>     Regards,
>     Bogdan
>
>     Ola Karlsson wrote:
>
>         Hi List.
>
>         Have some problems with the force_send_socket function.
>
>         I have one Opensips 1.4 server with two physical interfaces
>         and one alias interface.
>
>         eth0    195.x.x.101/28
>         eth0:1 195.x.x.106/28
>
>         eth1:   10.x.x.x
>
>         The script looks something like this where I use the
>         force_send_socket function.
>
>         if(uri=~"sip:0009.*") {
>                        force_send_socket(udp:195.x.x.106:5060);
>                        strip(4);
>                        rewritehostport("195.x.x.102:5060");
>                        route(1);
>         }
>
>         In the end the Via field is set to 106 but NOT the source IP
>         that stays .101 ..
>
>         Am I doing something wrong with this function or is OpenSIPS
>         giving me a hard time?
>
>         /Ola
>         ------------------------------------------------------------------------
>
>         _______________________________________________
>         Users mailing list
>         Users at lists.opensips.org <mailto:Users at lists.opensips.org>
>         http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>          
>
>
>