[OpenSIPS-Devel] [ opensips-Bugs-3432330 ] Snom re-registering with Multiple Location Entries

[SourceForge.net]

Bugs item #3432330, was opened at 2011-11-02 18:05
Message generated for change (Comment added) made by vladut-paiu
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3432330&group_id=232389

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: None
Group: trunk
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Duane Larson (duanelarson123)
>Assigned to: Vladut-Stefan Paiu (vladut-paiu)
Summary: Snom re-registering with Multiple Location Entries

Initial Comment:
In the past Snom phones worked fine when it came to Registering with OpenSIPS.  Now it appears no matter what version of code Snom is running it will Register and then you will have multiple Registers in the Location table.  So if you set the Register time to 600 the first time it registers everything will be good.  Then at 300 seconds the Snom phone sends a re-register and that one is added to the Location table, but the old register is still in the Location table also.  So at 300 seconds you have 2 Location Entries for one phone.  Then once you get to around 600 seconds a third re-register is sent and for a short while you have 3 Location entries for a single phone.  I notice that Blink and Jitsi don't have this issue.  I looked at the SIP REGISTER messages for Jitsi, Blink and Snom and I don't see any major difference that could cause this.

Please refer to the following mailing list to see the thread for this issue.
http://opensips-open-sip-server.1449251.n2.nabble.com/Multiple-Registered-Locations-for-a-single-agent-td6950474.html

On my main.c file it says that the version is 8267

----------------------------------------------------------------------

>Comment By: Vladut-Stefan Paiu (vladut-paiu)
Date: 2011-11-03 11:30

Message:
Hello,

I was thinking that maybe your issue has something to do with the GRUU
additions on the Registrar & Usrloc modules,
but 8267 is before adding the GRUU support.

Are you, by any change, using the query insert buffering support ? Also,
what usrloc DB mode are you using ?

When the DB records are broken, if you do opensipsctl ul show , do you
still get the duplicate contacts there as well ? What I'm trying to see if
it's just the DB info that is bogus, or if the OpenSIPS internal memory is
affected as well.

Regards,
Vlad

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=1086410&aid=3432330&group_id=232389