[OpenSIPS-Devel] FW: [OpenSIPS-Users] drouting module 1.6.3
Anton Zagorskiy
a.zagorskiy at oyster-telecom.ru
Mon Dec 20 14:21:07 CET 2010
It seems that openSIPS crashes only when fork=yes.
When I set fork=no drouting works well and openSIPS doesn't crash.
WBR, Anton Zagorskiy
VoIP Developer, Oyster Telecom
Phone.: +7 812 601-0666
Fax: +7 812 601-0593
a.zagorskiy at oyster-telecom.ru
www.oyster-telecom.ru
> -----Original Message-----
> From: devel-bounces at lists.opensips.org [mailto:devel-
> bounces at lists.opensips.org] On Behalf Of Anton Zagorskiy
> Sent: Monday, December 20, 2010 1:07 PM
> To: 'OpenSIPS devel mailling list'
> Subject: Re: [OpenSIPS-Devel] FW: [OpenSIPS-Users] drouting module
> 1.6.3
>
> Hi.
>
> Please see memory debug http://pastebin.com/JKzyya5L
> I don't know how to interpret it but there is no 'overlap' word.
>
>
>
>
> WBR, Anton Zagorskiy
> VoIP Developer, Oyster Telecom
> Phone.: +7 812 601-0666
> Fax: +7 812 601-0593
> a.zagorskiy at oyster-telecom.ru
> www.oyster-telecom.ru
>
>
>
> > -----Original Message-----
> > From: devel-bounces at lists.opensips.org [mailto:devel-
> > bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
> > Sent: Friday, December 17, 2010 9:13 PM
> > To: OpenSIPS devel mailling list
> > Subject: Re: [OpenSIPS-Devel] FW: [OpenSIPS-Users] drouting module
> > 1.6.3
> >
> > Hi Anton,
> >
> > have you tried to enable to memory debugger to see if any memory
> > overlapping is reported ?
> >
> > Regards,
> > Bogdan
> >
> >
> > Anton Zagorskiy wrote:
> > > Hello.
> > >
> > > I've made some debug on this crash.
> > > The problem is dereferencing invalid pointer (0x1)
> > >
> > > This happens in the function drouting.c::static int
> do_routing(struct
> > > sip_msg* msg, dr_group_t *drg, int sort_order)
> > > Line 1005: if( (rt_info->pgwl[i].pgw->flags &
> DR_DST_STAT_DSBL_FLAG)
> > == 0 )
> > >
> > > In my case i == 0, and rt_info->pgwl[0].pgw is 0x1
> > >
> > > In fact, in the routing.c::build_rt_info(..) rt_info->pgwl[0].pgw
> > obtains
> > > correct address - lines from 170 to 180.
> > >
> > > So, something changes that pointer.
> > >
> > >
> > >
> > >
> > >
> > > WBR, Anton Zagorskiy
> > > VoIP Developer, Oyster Telecom
> > > Phone.: +7 812 601-0666
> > > Fax: +7 812 601-0593
> > > a.zagorskiy at oyster-telecom.ru
> > > www.oyster-telecom.ru
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: users-bounces at lists.opensips.org
> > > [mailto:users-bounces at lists.opensips.org] On Behalf Of Anton
> > Zagorskiy
> > > Sent: Thursday, December 16, 2010 6:14 PM
> > > To: 'OpenSIPS users mailling list'
> > > Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> > >
> > > I've made a simple config, and openSIPS still crashes.
> > >
> > > Please see my config here http://pastebin.com/mfabxGJJ
> > > And please see a full log file http://pastebin.com/0VXQ6vwT
> > >
> > >
> > >
> > >
> > >
> > > WBR, Anton Zagorskiy
> > > VoIP Developer, Oyster Telecom
> > > Phone.: +7 812 601-0666
> > > Fax: +7 812 601-0593
> > > a.zagorskiy at oyster-telecom.ru
> > > www.oyster-telecom.ru
> > >
> > >
> > >
> > >
> > >> -----Original Message-----
> > >> From: users-bounces at lists.opensips.org [mailto:users-
> > >> bounces at lists.opensips.org] On Behalf Of Anton Zagorskiy
> > >> Sent: Thursday, December 16, 2010 11:54 AM
> > >> To: 'OpenSIPS users mailling list'
> > >> Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> > >>
> > >> Hi!
> > >>
> > >> What about investigation my crash?
> > >> Should I send any additional information?
> > >>
> > >>
> > >>
> > >>
> > >>> -----Original Message-----
> > >>> From: users-bounces at lists.opensips.org [mailto:users-
> > >>> bounces at lists.opensips.org] On Behalf Of Anton Zagorskiy
> > >>> Sent: Tuesday, December 14, 2010 5:01 PM
> > >>> To: 'OpenSIPS users mailling list'
> > >>> Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> > >>>
> > >>> Yes, openSIPS crashed because of there are "INFO:core:sig_usr:
> > signal
> > >>> 15 received" messages in a log file.
> > >>> I've tested on new VM with CentOS 5.5 with sources from svn
> stable
> > >>> release
> > >>>
> > >>> Please see bt and bt full results in the attach.
> > >>>
> > >>>
> > >>> Code:
> > >>>
> > >>> route
> > >>> {
> > >>> [skipped]
> > >>>
> > >>> if (!do_routing())
> > >>> {
> > >>> xlog("*** !!! route[invite]: No rules found for
> do_routing().
> > >>> STOP");
> > >>> send_reply("503", "Error");
> > >>> exit;
> > >>> };
> > >>> xlog("*** route[invite]: do_routing() passed");
> > >>> xlog("*** route[invite]: dr_attrs: $avp(s:dr_attrs); ruri:
> > >>> $avp(s:dr_ruri)");
> > >>> route(main_route);
> > >>>
> > >>> [skipped]
> > >>> }
> > >>>
> > >>>
> > >>>
> > >>> route[main_route]
> > >>> {
> > >>> xlog("*** +++ route[main_route] has started");
> > >>>
> > >>> if (is_method("INVITE"))
> > >>> {
> > >>> t_on_branch("2");
> > >>> t_on_reply("2");
> > >>> t_on_failure("1");
> > >>> };
> > >>>
> > >>> if (!t_relay())
> > >>> {
> > >>> sl_reply_error();
> > >>> };
> > >>>
> > >>> xlog("*** --- route[main_route] has finished"); }
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> WBR, Anton Zagorskiy
> > >>> VoIP Developer, Oyster Telecom
> > >>> Phone.: +7 812 601-0666
> > >>> Fax: +7 812 601-0593
> > >>> a.zagorskiy at oyster-telecom.ru
> > >>> www.oyster-telecom.ru
> > >>>
> > >>>
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: users-bounces at lists.opensips.org [mailto:users-
> > >>>> bounces at lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu
> > >>>> Sent: Tuesday, December 14, 2010 4:25 PM
> > >>>> To: OpenSIPS users mailling list
> > >>>> Subject: Re: [OpenSIPS-Users] drouting module 1.6.3 with b2b
> > >>>>
> > >>>> Hi Anton,
> > >>>>
> > >>>> Why do you say it crashes ? do you have a corefile ?
> > >>>>
> > >>>> your logs do not show any t_relay() after do_routing()....could
> > you
> > >>>> post the relevant snip of your cfg?
> > >>>>
> > >>>> Regards,
> > >>>> Bogdan
> > >>>>
> > >>>> Anton Zagorskiy wrote:
> > >>>>
> > >>>>> Hi!
> > >>>>>
> > >>>>> I'm trying to use drouting module, but something says to me
> that
> > >>>>>
> > >> I
> > >>
> > >>>> using it
> > >>>>
> > >>>>> wrong because openSIPS goes to crash.
> > >>>>>
> > >>>>> I've inserted following values in the DB:
> > >>>>>
> > >>>>> 1. dr_gateways:
> > >>>>>
> > >>>>> gwid(2)
> > >>>>> type(1)
> > >>>>> address(192.168.0.10)
> > >>>>> strip(0)
> > >>>>> pri_prefix(1000)
> > >>>>> attrs("")
> > >>>>> probe_mode(0)
> > >>>>> description(Gateway1)
> > >>>>>
> > >>>>> 2. dr_groups:
> > >>>>> id(1)
> > >>>>> username(100)
> > >>>>> domain(mydomain.com)
> > >>>>> groupid(1)
> > >>>>> description(All-Test)
> > >>>>>
> > >>>>> 3. dr_gw_lists:
> > >>>>> id(2)
> > >>>>> gwlist(2)
> > >>>>> description(Test)
> > >>>>>
> > >>>>> 4. dr_rules:
> > >>>>> ruleid(1)
> > >>>>> groupid(1)
> > >>>>> prefix(89112599077)
> > >>>>> timerec("")
> > >>>>> priority(1)
> > >>>>> routeid("")
> > >>>>> gwlist(#2)
> > >>>>> description(Test)
> > >>>>> attrs("")
> > >>>>>
> > >>>>>
> > >>>>> So, I'm calling from 100 at mydomain.com to 89112599077.
> > >>>>> I'm expecting that this will be routed to 192.168.0.10 with R-
> URI
> > >>>>> 100089112599077 at .. Right?
> > >>>>>
> > >>>>> But when I'm calling do_routing() the same INVITE is passed to
> > >>>>>
> > >> the
> > >>
> > >>>> main
> > >>>>
> > >>>>> route block and I'm again calling do_routing (Nothing changed
> in
> > >>>>>
> > >>> the
> > >>>
> > >>>> script
> > >>>>
> > >>>>> :)) and opensips is crashing...
> > >>>>>
> > >>>>> Log file hasn't helpful messages:
> > >>>>>
> > >>>>> [8031]: *** route[invite]: call do_routing()
> > >>>>> [8031]: DBG:core:db_new_result: allocate 28 bytes for result
> set
> > >>>>>
> > >> at
> > >>
> > >>>>> 0x81ddb78
> > >>>>> [8031]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned
> > >>>>>
> > >> from
> > >>
> > >>>> the query
> > >>>>
> > >>>>> [8031]: DBG:core:db_allocate_columns: allocate 16 bytes for
> > >>>>>
> > >> result
> > >>
> > >>>> columns
> > >>>>
> > >>>>> at 0x81ddba4
> > >>>>> [8031]: DBG:db_mysql:db_mysql_get_columns:
> > >>>>>
> > >>>> RES_NAMES(0x81ddba8)[0]=[groupid]
> > >>>>
> > >>>>> [8031]: DBG:db_mysql:db_mysql_get_columns: use DB_INT result
> type
> > >>>>> [8031]: DBG:core:db_allocate_rows: allocate 28 bytes for result
> > >>>>>
> > >>> rows
> > >>>
> > >>>> and
> > >>>>
> > >>>>> values at 0x81ddbd0
> > >>>>> [8031]: DBG:db_mysql:db_mysql_str2val: converting INT [1]
> > >>>>> [8031]: DBG:core:db_free_columns: freeing result columns at
> > >>>>> 0x81ddba4
> > >>>>> [8031]: DBG:core:db_free_rows: freeing 1 rows
> > >>>>> [8031]: DBG:core:db_free_row: freeing row values at 0x81ddbd8
> > >>>>> [8031]: DBG:core:db_free_rows: freeing rows at 0x81ddbd0
> > >>>>> [8031]: DBG:core:db_free_result: freeing result set at
> 0x81ddb78
> > >>>>> [8031]: DBG:drouting:do_routing: using dr group 1
> > >>>>> [8031]: DBG:drouting:internal_check_rt: found rgid 1 (rule list
> > >>>>>
> > >>>> 0xb60c0d0c)
> > >>>>
> > >>>>> [8034]: DBG:tm:utimer_routine: timer routine:4,tl=0xb60c34b4
> > >>>>>
> > >>>> next=(nil),
> > >>>>
> > >>>>> timeout=11900000
> > >>>>> [8034]: DBG:tm:retransmission_handler: retransmission_handler :
> > >>>>>
> > >>>> request
> > >>>>
> > >>>>> resending (t=0xb60c3368, INVITE si ... )
> > >>>>> [8034]: DBG:tm:set_timer: relative timeout is 2000000
> > >>>>> [8034]: DBG:tm:insert_timer_unsafe: [5]: 0xb60c34b4 (13900000)
> > >>>>> [8034]: DBG:tm:retransmission_handler: retransmission_handler :
> > >>>>>
> > >>> done
> > >>>
> > >>>>> [8032]: DBG:core:parse_msg: SIP Request:
> > >>>>> [8032]: DBG:core:parse_msg: method: <INVITE> (# The same
> INVITE
> > >>>>>
> > >>> is
> > >>>
> > >>>>> coming!)
> > >>>>>
> > >>>>> What I'm doing wrong?
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>> _______________________________________________
> > >>>> Users mailing list
> > >>>> Users at lists.opensips.org
> > >>>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>>>
> > >> _______________________________________________
> > >> Users mailing list
> > >> Users at lists.opensips.org
> > >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >>
> > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at lists.opensips.org
> > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list
> > > Devel at lists.opensips.org
> > > http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
> > >
> > >
> >
> >
> > --
> > Bogdan-Andrei Iancu
> > OpenSIPS Event - expo, conf, social, bootcamp
> > 2 - 4 February 2011, ITExpo, Miami, USA
> > www.voice-system.ro
> >
> >
> > _______________________________________________
> > Devel mailing list
> > Devel at lists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
>
>
> _______________________________________________
> Devel mailing list
> Devel at lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
More information about the Devel
mailing list